Socket CX2821-656 Manual de usuario

Cordless Hand Scanner Series 7

with Bluetooth®Wireless Technology

Featuring a Bluetooth enabled bar code scanner and SocketScan

software for wirelessly adding bar code scanning to Bluetooth

enabled mobile computers running:

•Windows Mobile 2003, 2003SE or 5.0

•Palm OS 5.2 or later

•Windows XP or XP Tablet Edition

User’s Guide

5/2006 Document # 6410-00233 H

Socket, the Socket logo and Battery Friendly are registered trademarks of

Socket Communications, Inc. Cordless Hand Scanner with Bluetooth

Wireless Technology, SocketScan, Mobility Friendly, Connect!Agent, and

Error Proof Protocol are trademarks of Socket Communications, Inc.

Bluetooth and the Bluetooth logos are registered trademarks owned by

Bluetooth SIG, Inc., U.S.A. and licensed to Socket Communications, Inc.

All other brand and product names are trademarks of their respective

holders.

The Cordless Hand Scanner includes technology licensed under United

States Patent No. 5,902,991.

Reproduction of the contents of this manual without the permission of

Socket Communications is expressly prohibited. Please be aware that the

products described in this manual may change without notice.

Feel free to contact SOCKET COMMUNICATIONS at:

Socket Communications, Inc.

37400 Central Court

Newark, CA 94560

Other than the above, Socket Communications can assume no responsibility

for anything resulting from the application of information contained in this

manual.

Please refrain from any applications of the Socket Cordless Hand Scanner

that are not described in this manual. Please refrain from disassembling the

Cordless Hand Scanner. Disassembly of this device will void the product

warranty.

You can track new product releases, software updates and technical

bulletins by visiting Socket’s web page at: www.socketcom.com.

Table of Contents

1 | INTRODUCTION 5

About the Software 5

About Combining Scanning with Bluetooth 6

System Requirements 7

Package Contents 7

Product Registration 8

Hardware Features 8

2 | HARDWARE PREPARATION 10

Installing Batteries and Attaching the Tether 10

Charging the Scanner 11

3 | SETUP FOR WINDOWS MOBILE 12

STEP 1: Install the Software 13

STEP 2: Configure Scanner Settings 15

STEP 3: Connect CHS to Host Device with Bluetooth 17

STEP 4: Scan Data into Your Application 19

OPTIONAL: Select Symbologies 21

OPTIONAL: Configure Prefix/Suffixes 22

OPTIONAL: Run Scan Demo 23

4 | SETUP FOR PALM 24

STEP 1: Install the Software 25

STEP 2: Connect CHS to PDA with Bluetooth 26

STEP 6: Scan Data into Your Application 29

OPTIONAL: Configure Scan Settings 31

OPTIONAL: Select Symbologies 33

OPTIONAL: Test Bar Codes 34

5 | SETUP FOR WINDOWS XP 35

STEP 1: Install the Software 36

STEP 2: Configure Bluetooth Settings 38

STEP 3: Configure Scanner Settings 44

STEP 4: Start SocketScan and Connect to CHS 46

STEP 5: Scan Data into Your Application 47

OPTIONAL: Assign Sound and Prefix/Suffix Settings 49

OPTIONAL: Configure Advanced Bluetooth Settings 50

OPTIONAL: Assign a Trigger Button 52

OPTIONAL: Select Symbologies 53

OPTIONAL: View Version Information 54

APPENDICES

A | SPECIFICATIONS 55

B | SAFETY AND USAGE TIPS 57

C | BAR CODE LABEL SPECIFICATIONS 59

D | ENABLING OR DISABLING SYMBOLOGIES 60

E | DECODE ZONE 63

F | TROUBLESHOOTING 64

G | TECHNICAL SUPPORT 68

LIMITED WARRANTY 69

REGULATORY COMPLIANCE 71

1 | Introduction

If you need to collect bar coded data but don't want to be tied to your mobile

or desktop computer, Socket's Cordless Hand Scanner (CHS) Series 7 with

Bluetooth wireless technology is just what you're looking for. This

innovative device combines the power of laser bar code scanning with the

convenience of Bluetooth wireless technology in a single compact,

lightweight device that is ergonomically designed to fit comfortably in the

palm of your hand.

Bar code scanning is the most efficient way to collect data from a mobile

computer. If the data to be entered is bar coded, using a laser scanner is 50

times faster and 10,000 times more accurate than manual data entry.

Bluetooth wireless technology transforms how devices connect with each

other, offering you new possibilities for using your mobile computer with

other devices. With Socket's Cordless Hand Scanner (CHS), you can scan

bar codes while connected to the PDA in your pocket or to your laptop,

tablet or desktop computer located up to 300 feet away — all without the

hassle of cables or the awkwardness of a protruding antenna.

Scanner Versions

The CHS Series 7 includes three versions of the scanner. The entry-level

CHS 7E uses linear CMOS imaging technology. The mid-level CHS 7M

has a Class 1 laser scanner. The performance level CHS 7P features a Class

laser scanner and a ruggedized construction.

About the Software

SocketScan™enters scanned data directly into any open

Windows or Palm OS program as if the data were manually

typed, so you can use the CHS with your favorite application.

Included is a utility that enables you to configure

Prefix/Suffixes, sounds, and other special settings for the CHS.

Connect!Agent™for Windows Mobile and XP simplifies Bluetooth by

automatically setting up and managing the wireless connection.

Connect!Agent runs in the background, requiring no user interaction.

CHAPTER 1: INTRODUCTION 5

About Combining Scanning with Bluetooth

The Cordless Hand Scanner represents an optimal combination of proven

laser bar code scanning and state-of-the-art Bluetooth connectivity. Because

of the problems inherent in the intermittent storage of scanned data in on-

board memory if the Bluetooth connection is lost, the CHS is designed to

operate only when connected to the host, with the powerful Class 1 radio

providing the maximum possible connection range.

The user is advised of the connection status with a single beep when the

CHS connects to the host and a double beep when the connection is closed

or lost. As with any wireless device, connectivity range can be affected by a

variety of environmental variables.

The most likely source of errors in any cordless scanning system is not in

the scanning and decoding process, but in the transmission of the data to the

host. For this reason, the Cordless Hand Scanner features Socket’s

exclusive Error Proof Protocol (patent pending), which ensures that

scanned data is correctly received by the host computer and allows for real-

time validation of data and notifies the user in case of errors.

The beeper and green LED signals provided by the CHS confirm not only a

successful scan but also the successful transmission of the scanned data to

the host. Users familiar with bar code scanning may notice a slight delay

between the successful scan and shut off of the laser, and the beep and

green LED from the CHS confirming completed transmission of the data. In

most instances, this delay is less than 300 ms (milliseconds), but may be

slightly longer as the connectivity range limit is approached.

Because of the two-way transmission verification process, it is possible to

cause communication problems by scanning bar codes as fast as possible.

When this occurs, all transmissions will stop for several seconds before

scanning can be resumed. To prevent this from happening, the user should

wait until the confirming beep is received before scanning the next bar

code.

System Requirements

Your mobile computer should meet these minimum requirements:

•Any of the following operating systems:

−Windows Mobile 2003, 2003SE or 5.0

−Palm OS 5.2 or later

−Windows XP or XP Tablet Edition

•Any of the following Bluetooth stacks: *

−Socket Drakar v1.4 (from Socket SDIO and CF Connection Kits)

−IVT BlueSoleil v1.4.7 or later (from Socket CF Connection Kit with Adapter

or Socket Class 1 USB Adapter)

−Broadcom (Widcomm) v1.4

−Microsoft Bluetooth stack for Pocket PCs

−Microsoft Windows XP Service Pack 2

−Toshiba Bluetooth stack 3.03.06 or greater (with Windows XP)

If you are using a Pocket PC or Palm device, during installation you will

need a desktop or laptop computer that meets these minimum requirements:

•Windows 98SE, Me, 2000 or XP

•Either Microsoft ActiveSync 4.0 or greater or Palm Desktop Software

For information about using the CHS with Symbian Series 60 devices,

please visit: www.socketcom.com/product/cordless.asp?Type=Scanner

*Support for other Bluetooth stacks is planned for future releases. For

Windows XP, only the IVT and Microsoft stacks are compatible with the

optional Socket Connect!Agent software.

For software updates, please visit: www.socketcom.com/support/support_bar.asp

Package Contents

The Socket Cordless Hand Scanner package includes these items:

•Socket Cordless Hand Scanner with Bluetooth Wireless Technology

•AC charging adapter with international plugs

•2 NiMH rechargeable AAA batteries

•Lanyard with retractable tether

•Software Installation CD

•Booklets with copyright, warranty, and regulatory compliance

information

CHAPTER 1: INTRODUCTION 7

Product Registration

Socket highly recommends that all customers register their Socket products.

Registered users receive the following benefits:

•Priority for technical support

•Special offers for future products and upgrades

•The latest new product information.

Hardware Features

Rechargeable Batteries and AC Adapter

Charge the internal batteries by using the included AC adapter. The adapter

rating is 5V, 2A, positive pole center. A fully charged battery should

provide roughly 8 hours of normal operation.

WARNING: Charge ONLY NiMH batteries in the CHS. Damage may

result if other battery types are charged. Do not store the CHS for more

than 30 days with the batteries installed.

The red Battery Status LED will not function properly if standard AAA non-

rechargeable batteries are being used.

Besides the included AC adapter, you can also recharge the CHS by using

any of the following:

•Socket’s Mobile Power Pack. For more information, please visit:

www.socketcom.com/product/AC4009-541.asp

•AC and DC adapters of most recent Pocket PCs from Casio, Compaq,

Dell, Fujitsu, and Toshiba are also compatible.

Touch Screen Stylus

The CHS features a stylus tip in the tail of the CHS

that you can use Pocket PC and other device touch

screens. The stylus can be removed with small pliers

if desired. Visit the Socket website to purchase

replacement styli.

WARNING: Do not use the stylus if damaged. A

damaged stylus may scratch the display screen

of your computer.

The stylus does not work with XP Tablet computers using Active Matrix

displays.

Status Indicator LED

LED LED Activity Meaning

1 blink per second Bluetooth radio is on, but not

connected.

Bluetooth

Status

(Blue)

1 blink per 5 seconds Bluetooth radio is on, connection

established.

Good Read

(Green)

Green Data successfully scanned and

transmitted to host device.

1 blink per second Less than 20% of battery life

remaining.

Solid red Batteries are charging.

Battery

Status

(Red) Off when connected

to charger Batteries are fully charged.

Status Indicator Beeps

The scanner beeps to signal the Bluetooth connection status. You can also

have the scanner beep to indicate scanned data reaching the host device.

LED Beep Pattern Meaning

1 beep Connection to host device has begun.

Bluetooth

Status

(Blue)

2 beeps Connection to host device has ended.

Good Read

(Green)

1 beep Data was successfully scanned and

transmitted to host device.

CHAPTER 1: INTRODUCTION 9

2 | Hardware Preparation

Installing Batteries and Attaching the Tether

1. Use a coin or screwdriver to unlock and remove the battery cover. Turn

the lock underneath the scanner to a horizontal position. Remove the

casing.

2. Install the batteries in opposite directions, as indicated by the positive

symbols.

WARNING: Do not install the batteries incorrectly.

Damage may result.

3. If desired, attach the tether. Wrap the string loop around the inside part

of the lock.

4. Replace the battery cover and lock it into place.

5. If desired, attach the tether to a lanyard or belt.

Tabla de contenidos

Otros manuales de Lector de código de barras de Socket

Socket

Socket DURASCAN D740 Manual de usuario

Socket

Socket SD Scan Card 3E Manual de usuario

Socket

Socket In-Hand Scan Card Manual de usuario

Socket

Socket D820 Manual de usuario

Socket

Socket CHS 7Ci Manual de usuario

Socket

Socket 7Qi Manual de usuario

Socket

Socket DURASCAN D760 Instrucciones de funcionamiento

Socket

Socket SocketScan S700 Manual de instalación

Socket

Socket SOCKETSCAN 800 Series Manual de usuario

Socket

Socket Gun Scanner (GS) 2X (Xtreme Performance) Manual de usuario

Socket

Socket DURASCAN Series Manual de usuario

Socket

Socket SocketScan S700 Manual de usuario

Socket

Socket CHS 7M Manual de usuario

Socket

Socket CHS 7Mi Manual de usuario

Socket

Socket 2DSC 5 series Manual de usuario

Socket

Socket CompactFlash Scan Card Series 5 Manual de usuario

Socket

Socket CHS Series 7 Manual de usuario

Socket

Socket CHS Series 7 Guía de solución de problemas

Socket

Socket CHS Series 7 Manual de usuario

Socket

Socket SocketScan S550 Manual de usuario

Socket

Socket DuraScan 700 Series Manual de usuario

Socket

Socket Wand Scanner 2E Manual de usuario

Socket

Socket DuraScan D745 Manual de usuario

Socket

Socket 7Qi Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario