SC&T HE04SEK Manual de usuario

HDMI Distribution Amplifier CAT5e Extender

ITEM NO.: HE04SEK 1 x 4 Economic Distribution Amplifier CAT5e Extender Kit

HE04SEK extends and distributes HDMI signal to 4 remotes HDMI displays over CAT5e cable.

There is no power required for the receiver (HE01SER).

The transmission distance is up to 40M at 1080p, 70M at 720p.

It is expandable by stacking to another HE04SET or working with chainable receiver HE01SLR to get 1 in

multiple out application. (1 in 5 out, 1 in 6 out, 1 in 8 out…etc.)

It’s suitable for any place where one in multiple out application is needed, such as bar, business, church,

conference room, school, CCTV, surveillance…etc.

Features:

 Extends and distributes HDMI signal to 4 remote HDMI displays over CAT5e cable.

 Receiver unit no external power required.

 Supports resolution up to 1080p 60Hz.

 Transmission distance up to 40M at 1080p, 70M at 720p.

 Built-in HDMI loop out supports CEC.

 The transmitter can be stacked to another HE04SET for 1 in 8 out application.

 HDMI 1.4 compliance.

 Supports AC3, DTS, Dobly TrueHD, DTS-HD

 Supports RS232 control.

 Supports EDID management

 Optional Model: HE01SLR (Chainable Receiver)

Installation:

(1) Extends and distributes 1 HDMI source to remote 4 HDMI displays.

(2) Works with chainable receiver HE01SLR (Max. 3pcs) to get extra transmission distance and outputs.

(3)Stack to another HE04SET through HDMI loop out port to get configuration of 1 in 8 out.

Panel Review:

(1) HE04SET

No. Interface Description

1 Green LED Green light indicates “ON” status.

2 Blue LED Blue light indicates “HDMI IN” is connected to HDMI source.

3 Blue LED Blue light indicates “LOOPOUT” is connected to HDMI display.

4 Rotary Switch To select EDID by rotating the switch from 0 to F. (please refer to EDID setting)

5 SET Button Press 1 second to copy selected EDID.

6 Output 1~4 Connects to remote receivers (HE01SER, HE01SLR) with CAT5e cables.

(please refer to Note 2-4)

7 HDMI Input Connects to HDMI source with HDMI cable.

8 Loop Out Connects to HDMI display or another HE04SET with HDMI cable.

(please refer to Note 1)

9 Console Connects to RS232 control device with DB9(F) cable for controlling

HE04SET or updating firmware. (please refer to RS232 setting)

10 Power Input Connects to DC12V 1A adapter.

(2) HE01SER

No. Interface Description

1 Green LED Green light indicates receiving power and video signals.

2 Yellow LED Yellow light indicates no signal input or receiving an unsupported format.

Notes:

1. When connect HDMI display with loop out port, please make sure HDMI cable connects to the

Input 1 of HDMI display.

2. It is recommended using UTP cable.

3. When using the STP cable, the transmission distance might be shorter. (CAT6a: 25-30M,

CAT7:25- 40M)

4. The cable must be straight, do not roll the cable to avoid crosstalk interference.

RJ45 Pinout

(PIN TIA/EIA-568B)

RS232 Wiring

Hyper Terminal setting:〔57600bps (8-N-1)〕

Note: Pins not shown in table have no connection

RS232 Command Table

Command Description

OFF 1(Enter) OUTPUT 1 OFF

OFF 2(Enter) OUTPUT 2 OFF

OFF 3(Enter) OUTPUT 3 OFF

OFF 4(Enter) OUTPUT 4 OFF

OFF 5(Enter) HDMI LOOPOUT OFF

ON 1(Enter) OUTPUT 1 ON

ON 2(Enter) OUTPUT 2 ON

ON 3(Enter) OUTPUT 3 ON

ON 4(Enter) OUTPUT 4 ON

ON 5(Enter) HDMI LOOPOUT ON

(PIN TIA/EIA-568B)

PIN Wire Color

1 Orange-white

2 Orange

3 Green-white

4 Blue

5 Blue-white

6 Green

7 Brown-white

8 Brown

RS232

Pin Definition

2 TX

3 RX

5 GND

EDID Table

Number EDID Number EDID

0 Customize EDID #1 81920x1080

1 Customize EDID #2 91920x1200

2 1024x768 A720p 50Hz LPCM 2CH

3 1280x720 B720p 60Hz LPCM 2CH

4 1280x1024 C1080p 50Hz LPCM 2CH

5 1366x768 D1080p 60Hz LPCM 2CH

6 1600x900 E1080p 50Hz MULTI

7 1680x1050 F1080p 60Hz MULTI

EDID Settings

Step1: Refer to EDID list at last page and find the number of which EDID is needed. (0~F)

Step2: Rotate the rotary dip switch arrow to the selected number.

Step3: Click “SET” button, and the two blue LEDs will flash quickly.

Step4: Wait for HE04SET to restart, and the process of EDID setting is done.

Customize EDID Settings

Step1: Connects display and loop out port through HDMI cable.

Step2: Press and Hold “SET” button for approximately 3 second, and the two blue LEDs will flash

slowly then quickly.

Step3: Wait for HE04SET to restart, and the process of copying EDID is done.

Caution:

1. The wiring must be away from any equipment with electromagnetic wave, i.e.: mobile phone,

microwave, radio equipment, fluorescent lamp, high voltage power lines.

2. HE04SEK isn’t networking device, please do not connect with Ethernet device to avoid

damages.

Package Contents:

1 x HE04SET

4 x HE01SER

1 x DC12V 1A power supply

4 x Rubber cushions

2 x Screws/ Screw hole plugs

Specification:

ITEM NO. HE04SET

Input Interface HDMI Type A x 1

Loopout Interface HDMI Type A x 1

Video Output Interface RJ45x4

Resolution Up to 1080p @ 60Hz

Transmission distance Up to 40M at 1080p, 70M at 720p

RS232 Interface DB9(F)

RS232 Baud Rate 57600 bps

Power Supply DC 12V 1A

Max. Power Consumption 96W (0.8A)

Temperature Operation: 0 to 70℃, Storage: -20 to 125℃, Humidity: up to 95%

Dimension (mm) 167 x 101 x 40

Weight (g) 460

ITEM NO. HE01SE

Resolution Up to 1080p @ 60Hz

Distance Up to 40M at 1080p, 70M at 720p

HDMI Connector Type A

Power Consumption 320mA

Temperature Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: up to 95%

Dimension (mm) 57.5 × 24 × 20.2

Weight (g) 20

Rev. A

Tabla de contenidos

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manual de usuario