SC&T IP02ET Manual de usuario

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Extensor de SC&T

Manuales populares de Extensor de otras marcas

SY

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manual de usuario

1

IP CABLING TRANSMISSION –Active Series

ITEM NO.: IP02E IP Extender over Coax 500M

IP02E IP extender is designed to extend any TCP/IP devices for long range transmission up to 500M over

existing coaxial cable. Built in Analog video signal output which could send one Analog video camera and

one IP video by same coax cable. It is perfect to add one IP camera over existing CCTV analog video

camera environment. It is a great hybrid surveillance solution for sending IP video links to remote camera

installation that are beyond the 100 meters distance limit of Ethernet and also support traditional analog

CCTV camera.

IP02E IP Extender over Coax 500M

Extend IP camera signal or any TCP/IP devices over existing coaxial cable.

Send 1 port Analog video signal and 1 port IP video signal over same one coaxial cable.

Long range transmission up to 500 meters (Max.)

Support 10/100BASE-T transmission rate.

Perfect to upgrade the analog camera system into IP CCTV application.

Plug and play for easy installation.

Installation View:

Cable:

Link cable use high quality 75Ω coaxial cable.

RJ45 Define:

Ethernet Cable (Use TIA/EIA-568-B)

1. Orange-White TX+

2. Orange TX-

3. Green-White RX+

4. Blue Reserve

5. Blue-White Reserve

6. Green RX-

7. Brown-White Reserve

8. Brown Reserve

DIP Switch Setting：

IP02ET Uplink data rate setting

１２

↑↑ 21Mbps (default)

↓↑ 25Mbps

↑↓ 28Mbps

↓↓ 36Mbps

2

IP02ER Uplink data rate setting

１２

↑↑ 3Mbps (default)

↓↑ 4Mbps

↑↓ 9Mbps

↓↓ 11Mbps

To make sure the transmission quality, you could setup the DIP Switch based on the cable distance,

a longer distance setup to lower data rate; a short distance could be setup at higher data rate.

LED Indication:

Green ：Power ON/OFF

Yellow ：Ethernet 10/100Mbps linking

Green ：Flash →Data transmission

Panel View:

IP02ET

IP02ER

Specifications:

ITEM NO.

IP02ET

IP02ER

Ethernet Connector

RJ45 x 1

Video Connector

BNC x 1 (75 Ω)

Link Connector

BNC x 1 (75 Ω)

Date Rate Setting

DIP SWITCH x 1

Linking Cable

75Ω coax cable

Ethernet Speed

10/100 Mbps

Data Rate

Uplink：36Mbps , Downlink：11Mbps

Uplink：11Mbps, Downlink:36Mbps

Transmission Distance

500 M (Max)

LED Indication

Ethernet (Yellow/Green) x 1，Power (Green) x 1

Power Consumption

550mA (Max.)

Power Supply

DC 5V 1A

Temperature

Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: up to 95%

Dimension mm

49.2 x 112.5 x 25.2

Weight g

140

Rev.A