SC&T DE01 Series Manual de usuario

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Manuales populares de Extensor de otras marcas

SY

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manual de usuario

1 input 2 output DVI & Audio CAT5 Extender

ITEM NO.: DE01

Our Smart DE01 DVI CAT5 Extender with audio function is using two CAT5E/6 cables to extend your DVI

display up to 50 meters from your HDTV DVI or HDMI source. DVI transmitter with 2 output, one is

DVI loop output and the other is RJ45 CAT5 cable output for remote display. Under non-HDCP operation

mode, the application could be 1 input to 2 output distribution. Both of output built in signal boost

function, the working resolution up to 1920 x 1200.

DE01 1 input 2 output DVI & Audio CAT5 Extender

Extends any DVI compliant device over two CAT5E/6 cables. One CAT5E cable to send

DVI video signal, the other one send DDC and audio signal.

Extend the transmission distance up to 50 meters at 1920 x 1200.

Extend the transmission distance up to 70 meters at 1024 x 768.

Support analog stereo audio: 20Hz –20KHz.

Dual output: 1 x DVI loop output for local, plus 1 x CAT5 RJ45 output for remote side.

Built in equalization and signal boost function.

High quality digital video over CAT5e without any signal loss.

Support DDC, EDID and hot plug detection.

Installation View:

EDID Instruction:

1. Make sure to connect all equipments before sending power; then power on, the DE01T will

copy EDID from the local output monitor for source. It will take around 10 seconds to

complete.

2. If local output does not connect any monitor, it will auto copy EDID from remote monitor.

3. If the monitor not connected, it will use the default EDID.

Panel View:

DE01T

2

DE01R

Cable:

Video Link cable using high quality CAT5E UTP or CAT6 UTP cable,

Data Link cable using CAT5E UTP/STP or CAT6 UTP cable,

It is not high speed signal transmission, so using regular CAT5E UTP cable will be ok.

RJ45 pin Define:

Video Link (TIA/EIA-568-B)

Data Link (TIA/EIA-568-B)

Caution:

The cabling must away from any equipment with electromagnetic wave, i.e.:

microwave, radio equipment, high voltage.

Installation view:

ITEM NO.

DE01T

DE01R

Video Amplifier Bandwidth

2.25 Gpbs

Resolution

Up to 1920 x 1200

Link Cable Distance

CAT.5e 50M@1920 x 1080，60Hz

DVI Cable Distance

28 AWG DVI Cables 6M @1920 x 1080，60Hz

DVI Connector

DVI-I x 2 (29 Pin) Digital Only

DVI-I x 1 (29 Pin) Digital Only

Stereo Audio Connector

3.5mm Phone Jack x 2

3.5mm Phone Jack x 1

Link Connector

RJ45 x 2

RJ45 x 2

Power Supply

5V DC 2Amp Regulated (External)

Power Consumption

1200mA (Max)

350mA (Max)

Temperature

Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95%

Dimensions mm

125 x 110 x 30

88 x 95 x30

Weight g

310

200

Rev.B