Ruijie RG-MAP852V3 Manual de instalación y funcionamiento

Ruijie RG-MAP852(V3) Access Point

Hardware Installation and Reference Guide

Document version: V1.1

Date: August 16, 2023

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by

their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support email: service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are

in bold font.

Italic font

Arguments for which you supply values are in

italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and

separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in

brackets and separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for

consecutive 1- n times.

Double slashes at the beginning of a line of code

indicate a comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command

line interface) for indicative purpose only. In case of any discrepancy or inconsistency

between the manual and the actual version, the actual version prevails.

Contents

Preface.................................................................................................................................................. I

1 Product Overview ............................................................................................................................ 1

1.1 About the RG-MAP852(V3) Access Point.................................................................................1

1.2 Product Appearance ................................................................................................................1

1.3 Package Contents.....................................................................................................................5

1.4 Technical Specifications...........................................................................................................5

1.4.1 Dimensions and Weight...............................................................................................5

1.4.2 Radio Specifications .....................................................................................................6

1.4.3 Port Specifications........................................................................................................7

1.4.4 Power Supply and Consumption ................................................................................8

1.4.5 Environment and Reliability ........................................................................................8

1.5 LED and Button.........................................................................................................................9

2 Preparing for Installation.............................................................................................................. 11

2.1 Safety Precautions..................................................................................................................11

2.1.1 General Safety Precautions .......................................................................................11

2.1.2 Handling Safety ..........................................................................................................11

2.1.3 Electric Safety..............................................................................................................12

2.1.4 Storage Security .........................................................................................................12

2.2 Installation Environment Requirements..............................................................................12

2.2.1 Bearing Requirements...............................................................................................13

2.2.2 Ventilation Requirements..........................................................................................13

2.2.3 Space Requirements ..................................................................................................13

2.2.4 Temperature/Humidity Requirements.....................................................................13

2.2.5 Cleanliness Requirements.........................................................................................14

2.2.6 Anti-interference Requirements ...............................................................................15

2.3 Tools ........................................................................................................................................15

3 Installing the Access Point............................................................................................................ 16

3.1 Installation Flowchart ............................................................................................................16

3.2 Before You Begin....................................................................................................................17

3.3 Precautions.............................................................................................................................17

3.4 Installing the AP .....................................................................................................................18

3.4.1 Installing the AP in an 86 mm Junction Box.............................................................18

3.4.2 Removing the AP........................................................................................................21

3.5 Connecting Cables .................................................................................................................21

3.6 Bundling Cables......................................................................................................................22

3.6.1 Precautions .................................................................................................................22

3.6.2 Bundling Steps............................................................................................................22

3.7 Checklist After Installation ....................................................................................................22

3.7.1 Checking the AP..........................................................................................................22

3.7.2 Checking Cable Connection.......................................................................................22

3.7.3 Checking the Power Supply.......................................................................................22

iii

4 Verifying Operating Status ........................................................................................................... 23

4.1 Establishing the Configuration Environment ......................................................................23

4.2 Powering on the AP................................................................................................................23

4.2.1 Checklist Before Power-on ........................................................................................23

4.2.2 Check After Power-on ................................................................................................23

5 Monitoring and Maintenance....................................................................................................... 24

5.1 Monitoring ..............................................................................................................................24

5.1.1 LED...............................................................................................................................24

5.1.2 CLI Commands ...........................................................................................................24

5.2 Remote Maintenance.............................................................................................................24

5.3 Hardware Maintenance .........................................................................................................24

6 Troubleshooting ............................................................................................................................ 25

6.1 Troubleshooting Flowchart ...................................................................................................25

6.2 Common Faults ......................................................................................................................25

6.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In ..................25

6.2.2 LED Is Off for a Long Time.........................................................................................26

6.2.3 LED Is Steady Red.......................................................................................................26

6.2.4 LED Is Steady Green...................................................................................................26

6.2.5 LED Blinks Green at an Interval of 0.2s for a Long Time ........................................26

6.2.6 LED Blinks Red at an Interval of 1s for a Long Time ...............................................26

6.2.7 No Wireless Signal Searched.....................................................................................26

7 Appendix ........................................................................................................................................ 27

7.1 Connectors and Media...........................................................................................................27

7.2 Cabling Recommendations ...................................................................................................29

Hardware Installation and Reference Guide Product Overview

1 Product Overview

1.1 About the RG-MAP852(V3) Access Point

The RG-MAP852(V3) is a next-generation high-speed access point (AP) designed for high-

density scenarios, covering campus networks, dormitory networks, and medical care

ward networks.

Compliant with the IEEE 802.11ax standard, the RG-MAP852(V3) works in both 2.4 GHz

and 5 GHz frequency bands. The AP delivers a combined data rate of 2.976 Gbps, with up

to 574 Mbps in the 2.4 GHz band and 2.402 Gbps in the 5 GHz band. This eliminates the

performance bottleneck. The RG-MAP852(V3) provides four GE LAN ports and one GE

WAN port, catering for requirements on high-performance wired access in scenarios

including dormitories.

The RG-MAP852 (V3) provides wireless network security, RF control, mobile access,

Quality of Service (QoS), seamless roaming and other key features. Working with Ruijie

wireless access controllers (AC), the AP implements user data forwarding, security, and

access control.

1.2 Product Appearance

The RG-MAP852 (V3) provides two RF connectors, five 10/100/1000Base-T Ethernet ports

with auto-negotiation, and one micro USB console port, The AP can be powered by PoE.

Hardware Installation and Reference Guide Product Overview

Figure 1-1Front View

Figure 1-2Side View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie Reyee RG-RAP6262 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP52-OD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 Directional Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-A Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP130(L) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP210-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP740-I Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP850-I-V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP720-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de usuario

Ruijie

Ruijie RG-AP520 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 Directional Manual de usuario

Ruijie

Ruijie RG-SAP825-SP Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP73HD Manual de usuario

Ruijie

Ruijie RG-AP820-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-I Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP880-E Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680 CD Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de usuario

Ruijie

Ruijie Reyee Series Dimensiones

Ruijie

Ruijie RG-AP180(V3) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP130(W2) V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP220 Series Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario