Ruijie RG-AP880-E Manual de instalación y funcionamiento

Ruijie RG-AP880-E Access Point

Hardware Installation and Reference Guide

Document Version: V1.2

Date: August 16, 2023

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by

their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in

bold font.

Italic font

Arguments for which you supply values are in italic

font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and

separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets

and separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for

consecutive 1- n times.

Double slashes at the beginning of a line of code

indicate a comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command

line interface) for indicative purpose only. In case of any discrepancy or inconsistency

between the manual and the actual version, the actual version prevails.

Contents

Preface.................................................................................................................................................. I

1 Product Introduction....................................................................................................................... 1

1.1 Overview ...................................................................................................................................1

1.2 Product Appearance ................................................................................................................1

1.3 Package Contents.....................................................................................................................4

1.4 Technical Specifications...........................................................................................................5

1.4.1 Dimensions and Weight...............................................................................................5

1.4.2 Radio Specifications .....................................................................................................6

1.4.3 Port Specifications........................................................................................................7

1.4.4 Power Supply and Consumption ................................................................................8

1.4.5 Environment and Reliability ........................................................................................9

1.5 LED and Button.........................................................................................................................9

1.6 Optical Module .......................................................................................................................11

2 Preparing for Installation.............................................................................................................. 14

2.1 Safety Precautions..................................................................................................................14

2.1.1 General Safety Precautions .......................................................................................14

2.1.2 Handling Safety ..........................................................................................................14

2.1.3 Electric Safety..............................................................................................................15

2.1.4 Storage Safety.............................................................................................................15

2.2 Installation Environment Requirements..............................................................................15

2.2.1 Bearing Requirements...............................................................................................16

2.2.2 Ventilation Requirements..........................................................................................16

2.2.3 Space Requirements ..................................................................................................16

2.2.4 Temperature/Humidity Requirements.....................................................................16

2.2.5 Cleanliness Requirements.........................................................................................17

2.2.6 Anti-interference Requirements ...............................................................................18

2.2.7 Other Requirements ..................................................................................................18

2.3 Tools ........................................................................................................................................18

3 Installing the AP............................................................................................................................. 20

3.1 Installation Procedure ...........................................................................................................20

3.2 Before You Begin....................................................................................................................20

3.3 Precautions.............................................................................................................................22

3.4 Installing the AP .....................................................................................................................22

3.4.1 Mounting on the Ceiling............................................................................................22

3.4.2 Mounting on the Wall ................................................................................................25

3.5 Installing a Security Lock.......................................................................................................27

3.6 Installing an Optical Module .................................................................................................29

3.7 Removing the AP....................................................................................................................30

3.8 Connecting Cables .................................................................................................................31

3.9 Bundling Cables......................................................................................................................31

3.9.1 Precautions.................................................................................................................31

iii

3.9.2 Bundling Steps............................................................................................................31

3.10 Checking After Installation..................................................................................................32

3.10.1 Checking the AP .......................................................................................................32

3.10.2 Checking Cable Connections...................................................................................32

3.10.3 Checking the Power Supply.....................................................................................32

4 Verifying the Operating Status..................................................................................................... 33

4.1 Setting up the Configuration Environment .........................................................................33

4.2 Powering on the Device.........................................................................................................33

4.2.1 Checklist Before Power-on ........................................................................................33

4.2.2 Checklist After Power-on ...........................................................................................33

5 Monitoring and Maintenance....................................................................................................... 34

5.1 Monitoring ..............................................................................................................................34

5.1.1 LED...............................................................................................................................34

5.1.2 CLI Commands ...........................................................................................................34

5.2 Remote Maintenance.............................................................................................................34

5.3 Hardware Maintenance .........................................................................................................34

6 Troubleshooting ............................................................................................................................ 35

6.1 General Troubleshooting Flowchart.....................................................................................35

6.2 Common Troubleshooting Procedures................................................................................35

6.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In..................35

6.2.2 LED Is Off for a Long Time.........................................................................................35

6.2.3 LED Keeps Steady Red ...............................................................................................36

6.2.4 LED Keeps Steady Green ...........................................................................................36

6.2.5 LED Keeps Blinking Blue at an Interval of 0.2s (in Fit Mode)..................................36

6.2.6 LED Does Not Turn Steady Blue or Blinking Blue....................................................36

6.2.7 Radio Signal of the AP Cannot Be Found .................................................................36

7 Appendix ........................................................................................................................................ 37

7.1 Connectors and Media...........................................................................................................37

7.2 Optical Modules and Specifications......................................................................................39

7.3 Cabling Recommendations ...................................................................................................40

7.4 DC Power Connector Specifications .....................................................................................44

Hardware Installation and Reference Guide Product Introduction

1 Product Introduction

1.1 Overview

RG-AP880-E is a Wi-Fi 6E wireless access point (AP) released by Ruijie Networks for indoor

scenarios in the higher education, government, general education, finance, and business

sectors. It supports three radios, among which the 2.4 GHz band can provide a maximum

data rate of 574 Mbps, the 5 GHz band can provide a maximum data rate of up to 2.402

Gbps, and the 6 GHz band can provide a maximum data rate of up to 4.804 Gbps. The AP

can provide a combined date rate of up to 7.780 Gbps, which eliminates the bottleneck in

wireless performance.

The design of RG-AP880-E considers factors including wireless network security, radio

control, mobile access, QoS, seamless roaming, and IoT module expansion. The RG-

AP880-E can be used together with Ruijie's access controllers (ACs) to implement STA

data forwarding, security, and access control.

The RG-AP880-E can work in IEEE 802.11ax, 802.11ac, and 802.11n modes

simultaneously. It can be mounted against a wall, a ceiling, and other location. Moreover,

the RG-AP880-E supports local power supply and power over Ethernet (PoE), which can

be selected based on power supply conditions. It is very suitable for large campuses,

enterprise offices, hotspots, and other high-density scenarios.

1.2 Product Appearance

The RG-AP880-E provides three RF ports, two Ethernet copper ports, one 5G SFP port,

one RJ45 console port, one power port for external power supply device, one USB port,

and one reset button. For the two Ethernet copper ports, LAN 1 port supports IEEE

802.3af/at/bt-compliant PoE and LAN 2/IoT port can be used to supply power to the IoT

module (48 V/0.27 A, maximum power of 12.95 W).

Hardware Installation and Reference Guide Product Introduction

Figure 1-1Top View

Figure 1-2Front View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie RG-AP680-AR Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de usuario

Ruijie

Ruijie Reyee RG-RAP2260 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 IDA2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-I Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP220 Series Manual de usuario

Ruijie

Ruijie RG-WLAN Series Manual de instalación

Ruijie

Ruijie RG-AP710 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie RG-SAP845-SP Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP680-CD Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP1200-MNT Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AM5532 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-A Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP810-L Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP Series Manual de usuario

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP180P-L Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP2200 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie Reyee RAP6260-D Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680 CD Series Manual de instalación y funcionamiento

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario