Ruijie RG-AP630 Directional Manual de usuario

Ruijie RG-AP630 (CD) Wireless Access Points

Quick Installation Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

RG-AP630(CD) Wireless Access Point Quick Installation Guide

1Packing List

Name

Quantity

Unit

Host

Set

Mounting plate

Piece

Mounting bracket

Piece

Tie rod

Piece

M8x20 screw with spring and flat washers

Piece

M8x40 screw with spring and flat washers

Piece

Liquid-tight adapter

Piece

Liquid-tight adapter for optical fiber (Hardware Version

2.00 and later)

Piece

Grounding cable

Piece

Hose clamp

Piece

Security cable

Piece

M8x60 expansion bolt

Piece

Product Warranty Manual

Copy

RG-AP630 (CD) Wireless Access Point Quick Installation

Guide

Copy

2Accessories

Mounting Plate Mounting Bracket Tie Rod M8X40/M8X20 Screw

Grounding Cable Hose Clamp Liquid-tight Adapter

Liquid-tight Adapter for Optical Fiber Security Cable M8x60 Expansion Bolt

RG-AP630(CD) Wireless Access Point Quick Installation Guide

3Product Appearance

Product Appearance of RG-AP630 (CD)

Note: 1. Console port 2. 10/100/1000 Base-T auto-sensing Ethernet/PoE IN port 3. SFP combo port

RG-AP630(CD) Wireless Access Point Quick Installation Guide

4Installation Tools

The tool kit is customer supplied.

5LEDs

LED

State

Meaning

Blinking green

Initialization in progress

Solid yellow

Initialization is complete, but no CAPWAP connection.

Solid green

Initialization is complete, and a CAPWAP connection is

established.

System status

Solid red

The Ethernet/PoE IN port is disconnected.

1 solid on

< -70dBm

2 solid on

-70 to -50 dBm

WDS RSSI (3 LEDs)

3 solid on

> -50 dBm

RG-AP630(CD) Wireless Access Point Quick Installation Guide

6Installing the Security Cable

Remove the security cable from the mounting plate first. Then, attach the mounting plate to the bottom of the AP and

fasten the plate with the four M8x20 screws. Note that one screw is used to fix the metal shim of End A onto the plate

before it is tightened.

Attach the tie rod to the mounting plate and fasten the rod with the M8x40 screws after AP is well-positioned, shown in the

following figure.

RG-AP630(CD) Wireless Access Point Quick Installation Guide

7Mounting the AP to the Pole

Attach the mounting bracket to a pole with a hose clamp.

Attach the mounting plate to the mounting bracket through the rod with the M8x40 screws, adjust AP orientation, and

tighten the screws on the rod with the Phillips screwdriver (or the wrench). Finally, connect Loop B of the security cable to

the bracket by fastening the screw attached to Loop B

Horizontal pole mount is also supported. The procedure of horizontal pole mount is similar as that of vertical mount.

The outdoor AP can be mounted on a wall and a pole (diameter: 75 mm to 120 mm). If the diameter of the pole is out

of the range, the hose clamp is customer-supplied. In this case, we strongly recommend you to use a 304 stainless

steel hose clamp with thickness of 2.5mm at least.

8Mounting the AP on the Wall

Attach the mounting bracket to the wall with user-supplied expansion screws. M8 x 60 screws are recommended.

Mark the locations of the four screw holes by using the marker. Drill four 8 mm diameter holes. Tap expansion anchors

into the holes, and drive three screws through the mounting bracket into the anchors to fix the bracket.

RG-AP630(CD) Wireless Access Point Quick Installation Guide

Attach the tie rod to the mounting plate and fix the rod with the supplied M8x40 screws. Adjust the AP orientation, and

drive the two-side screws on the rod. Finally, drive the screw of Loop B into the fourth anchor.

9Connecting the Fiber Cable

The liquid-tight adapter for optical fiber is supplied for hardware V2.00 and later

Waterproofing material is customer-supplied.

1) Choose an LC-LC optical fiber with the diameter of 2.7±0.2mm.

2) Thread the fiber through the liquid-tight adapter in the order as shown.

RG-AP630(CD) Wireless Access Point Quick Installation Guide

3) Insert the plug of the fiber into the SPF port.

4) Tighten A.

5) Combine B and C and put the combination into A.

6) Tighten D before applying waterproof glue to its joint with A.

Before removing the optical fiber, dismantle the liquid-tight adapter first and then the plug.

If the diameter of LC-LC fiber is not 2.7±0.2mm, waterproofness of the adapter cannot be guaranteed.

10 Connecting the Network Cable

Thread the original network cable through the liquid-tight adapter.

Attach the plug into one end of the network cable nearest to the head of the liquid-light adapter.

Insert the plug into the PoE IN port, and tighten the liquid-tight adapter.

Make sure the plug is correctly inserted. The plug gets damaged when the liquid-tight adapter is wrenched

improperly. Before removing the network cable, dismantle the liquid-tight adapter first and then the plug.

11 Connecting the Grounding Cable

Make sure the AP and the power source share the common ground points.

A lightning arrester is integrated into the AP. In general, no additional lightening arrester is required. If there is higher

requirement for lightening protection, you can purchase it on your own.

Otros manuales para RG-AP630 Directional

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie Reyee RG-RAP6262 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP820-L(V2) Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP730-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-A Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP6262 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP810-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP220 Series Manual de usuario

Ruijie

Ruijie RG-AP530-I V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-M Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP2200 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-RAP1200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP52-OD Manual de usuario

Ruijie

Ruijie Reyee RG-RAP1201 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP720-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-U Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP880-AR Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-I (V2) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP685-SP Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario