Ranger design 1530-PCX Manual de usuario
INSTALLATION GUIDE
1530-PCX Double Clamp Ladder Rack
Promaster City ( Aluminum )
QUICK START GUIDE
REQUIRED ITEMS
2
PERSONS
NOTE: Use Sawhorses if possible, or use the box as a at protective surface on the ground or table.
qCordless Impact
qRatchet
qTape Measure
qMallet
qMarker
qLadder
qCutter
q1/2" Socket
qSawhorse ( Optional )
qBox
qKnife
q1/2" Wrench
q10mm Socket
qSilicone
q1.1 Setup...............................................................................................................................................
q1.2 Ladder Rack Assembly....................................................................................................................
3 - 5
6 - 13
Phase 1 - Assembly
Phase 2 - Installation
q2.1 Mounting Tracks Installation............................................................................................................
q2.2 Ladder Rack Installation..................................................................................................................
q2.3 Note.................................................................................................................................................
14
15 - 18
19
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
10-149 Clamp Handle Support 2
10-545 Ski Plastic Plug 4
10-548 Hook Protector ( 4 - 3/8" L ) 2
10-718 Mounting Track 2
10-460 “V” Foot 4
15-2596 Third Crossbow 1
15-3003 Ladder Clamp Lock 2
15-3004 Ladder Clamp Rear Hook 2
15-3005 Ladder Clamp Bar ( Driver Side ) 1
15-3006 Ladder Clamp Bar ( Passenger Side ) 1
15-3010 Ski ( Left ) 1
15-3011 Ski ( Right ) 1
15-3122 Rear Crossbow 1
15-3127 Front Crossbow 1
15-4290 Front Hook 2
94-1009 Assembly Fastener Kit 1
96-1013 Install Fastener Kit 1
BILL OF MATERIALS
15-300615-3005
15-3011
15-3010
15-3004 15-4290
15-3003
10-545
10-149
10-548
10-460
10-718
15-312215-2596
15-3127
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 4
94-1009 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
4×
#90-487 Carriage Bolt 5/16" × 3/4"
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
24×
#90-491 Carriage Bolt 5/16" × 1"
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
4×
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
2×
#90-491 Carriage Bolt 5/16" × 1"
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
#98-160 Spacer
# 90-487
4×
Carriage Bolt
5/16"-18 × 3/4"
SS304
# 90-491
26×
Carriage Bolt
5/16"-18 × 1"
SS304
# 98-117
Flat Washer
5/16", O.D 3/4"
SS18-8
34×
# 98-123
Lock Washer
Regular 5/16"
SS304
34×
# 94-105
Hex Nut
5/16"-18
SS316wax
34×
# 98-160 Spacer
SS18-8
2×
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 5
96 - 1013 Fastener Kit Fastener Assembly
8×
#90-209 Hex Bolt 5/16" × 1"
#98-123 Lock Washer
#98-117 Flat Washer
#94-150 Channel Nut
10×
#90-825 Hex Bolt M6 × 20mm
#98-119 Lock Washer
#98-113 Flat Washer
#98-149 Neoprene Spacer
# 98-119
10×
Lock Washer
1/4"
SS304
# 90-209
8×
Hex Bolt
5/16"-18 × 1"
SS304
# 94-150 Channel Nut
5/16"
8×
# 98-149
10×
Spacer
0.290" ID × 1.375" OD × 0.125" L
NEOPRENE
# 90-825
Hex Bolt
M6-1.0 × 20mm
SS304
10×
# 98-123
Lock Washer
5/16"
SS304
8×
10× # 98-113
Flat Washer
1/4", OD 5/8"
SS18-8
# 98-117
Flat Washer
5/16", OD 3/4"
SS18-8
8×
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 6
PHASE 1 – ASSEMBLY
1.2 LADDER RACK ASSEMBLY
1.2.1 Peel the backer off of the adhesive on the hook protector, then attach the hook protector
to the upper rear hook.
1.2.2 Attach the rear hooks to the ladder clamps, with the pre-assembled hardware on the pivot bars.
TOOLS
qKnife
REMOVE
TOOLS
qCordless Impact
q1/2" Socket
q1/2" Wrench
#90-225 Hex Bolt
5/16" - 18 × 2" SS304
#98-117 Flat Washer
#98-117 Flat Washer
#94-111 Lock Nut
HARDWARE USED
4× hardware is pre-assembled.
2×
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 7
1.2.3 Slide carriage bolts on the bottom face of the crossbows.
TIPS: Use tape to keep the bolts from sliding off.
NOTE: The track plug must be removed from the underneath of the third crossbow, and reinstalled
after the feet have been installed in the nal position.
Third crossbow
• Slide 4 pcs. of 1" carriage bolts.
DRIVER SIDE
8×
#90-491 Hex Bolt
5/16" × 1" SS304
Rear crossbow
• Slide 2 pcs. of 3/4" carriage bolts.
• Slide 4 pcs. of 1" carriage bolts.
HARDWARE USED
2×
#90-487 Carriage Bolt
5/16" × 3/4" SS304
PASSENGER SIDE
8×
#90-491 Hex Bolt
5/16" × 1" SS304
Rear crossbow
• Slide 2 pcs. of 3/4" carriage bolts.
• Slide 4 pcs. of 1" carriage bolts.
Third crossbow
• Slide 4 pcs. of 1" carriage bolts.
HARDWARE USED
2×
#90-487 Carriage Bolt
5/16" × 3/4" SS304
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 8
1.2.4 Install the feet on the front, and rear crossbows.
NOTE: The more slanted side of the V foot should be closer to the end of the crossbow.
HARDWARE USED
16× hand-tighten the nuts.
Carriage bolts are already on
the crossbows.
#98-123 Lock Washer
#98-117 Flat Washer
#94-105 Hex Nut
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 9
1.2.5 Fasten the ladder clamp assemblies to the rear crossbow.
HARDWARE USED
4×
Carriage bolts are already on
the crossbows.
#98-123 Lock Washer
#98-117 Flat Washer
#94-105 Hex Nut
TOOLS
qCordless Impact
q1/2" Socket
qTape Measure
qMarker
12 - 3/4"
For technical support, contact us at 1-800-565-5321 1530-PCX Installation Guide |REV. B2 | Page 10
1.2.6 • Pull out the 14.5" track plug on both ends of the front crossbow.
• Loosen the pre-assembled hardware on the front hooks and slide the hooks onto the
front crossbow to the position shown below.
• Cut the track plug, then attach it back to the crossbow.
8.5"
Tighten the nuts just to hold the front
hook for adjustment.
HARDWARE USED
4× hardware is pre-assembled.
#98-123 Lock Washer
#98-117 Flat Washer
#90-491 Carriage Bolt 5/16" × 1"
#94-105 Hex Nut
TOOLS
qMarker
qCutter
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Ranger design
Ranger design
Ranger design 6093-27 Manual de usuario
Ranger design
Ranger design C5-BA13-5 Manual de usuario
Ranger design
Ranger design 1506-DS Cargo Plus Manual de usuario
Ranger design
Ranger design 1525-FTL Manual de usuario
Ranger design
Ranger design S3-RA60-3 Manual de usuario
Ranger design
Ranger design 1530-MM Manual de usuario
Ranger design
Ranger design 1506-TC Cargo Plus Manual de usuario
Ranger design
Ranger design ACCESS STOW Manual de usuario
Ranger design
Ranger design 1530-TC Manual de usuario
Ranger design
Ranger design 1530-FS Manual de usuario
Ranger design
Ranger design 3068-DL Manual de usuario
Ranger design
Ranger design 1530-FTR Manual de usuario
Ranger design
Ranger design C30-DL Manual de usuario
Ranger design
Ranger design 1506-DH Cargo Plus Manual de usuario
Ranger design
Ranger design 1506-PHX Cargo Plus Manual de usuario
Ranger design
Ranger design 5044 Manual de usuario
Ranger design
Ranger design 3320-PC Manual de usuario
Ranger design
Ranger design C24-DH Manual de usuario
Ranger design
Ranger design 1530-M Manual de usuario
Ranger design
Ranger design 1506-GS Cargo Plus Manual de usuario
