Ranger design 1530-TC Manual de usuario
INSTALLATION GUIDE
1530-TC Double Clamp Ladder Rack
Transit Connect ( Aluminum )
QUICK START GUIDE
REQUIRED ITEMS
2
PERSONS
q1.1 Setup...............................................................................................................................................
q1.2 Ladder Rack Assembly....................................................................................................................
3 - 5
5 - 13
q2.1 Mounting Tracks Installation............................................................................................................
q2.2 Ladder Rack Installation..................................................................................................................
q2.3 Note.................................................................................................................................................
14
15 - 18
19
Phase 1 - Assembly
Phase 2 - Installation
NOTE: Use Sawhorses if possible, or use the box as a at protective surface on the ground or table.
qCordless Impact
qRatchet
qTape Measure
qMallet
qMarker
qLadder
qCutter
q1/2" Socket
qSawhorse ( Optional )
qBox
qKnife
q1/2" Wrench
q7/16" Socket
qSilicone
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
10-149 Clamp Handle Support 2
10-545 Ski Plastic Plug 4
10-548 Hook Protector ( 4 - 3/8" L ) 2
10-722 Mounting Track 2
10-4440 “C” Foot 4
15-3003 Ladder Clamp Lock 2
15-3004 Ladder Clamp Rear Hook 2
15-3005 Ladder Clamp Bar ( Driver Side ) 1
15-3006 Ladder Clamp Bar ( Passenger Side ) 1
15-3012 Ski ( Left ) 1
15-3013 Ski ( Right ) 1
15-3122 Rear Crossbow 1
15-3127 Front Crossbow 1
15-4290 Front Hook 2
94-1014 Assembly Fastener Kit 1
96-1015 Install Fastener Kit 1
BILL OF MATERIALS
15-3013
15-3012
15-300615-3005
15-3004 15-4290
15-3003
10-545
10-149
10-548
10-4440
10-722
15-3122
15-3127
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 4
94-1014 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
4×
#90-487 Carriage Bolt 5/16" × 3/4"
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
12×
#90-491 Carriage Bolt 5/16" × 1"
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
4×
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
2×
#90-491 Carriage Bolt 5/16" × 1"
#98-123 Lock Washer
#94-105 Hex Nut
#98-117 Flat Washer
#98-160 Spacer
# 90-487
4×
Carriage Bolt
5/16"-18 × 3/4"
SS304
# 90-491
14×
Carriage Bolt
5/16"-18 × 1"
SS304
# 98-117
Flat Washer
5/16", O.D 3/4"
SS18-8
22×
# 98-123
Lock Washer
Regular 5/16"
SS304
22×
# 94-105
Hex Nut
5/16"-18
SS316wax
22×
# 98-160 Spacer
SS18-8
2×
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 5
PHASE 1 – ASSEMBLY
1.2 LADDER RACK ASSEMBLY
1.2.1 Peel the backer off of the adhesive on the hook protector, then attach the hook protector
to the upper rear hook.
TOOLS
qKnife
REMOVE
2×
Fastener Assembly96-1015 Fastener Kit
# 98-117
16×
Flat Washer
5/16", O.D. 3/4"
SS18-8
8× # 98-123
Lock Washer
5/16"
SS304
8× # 94-150 Channel Nut
5/16"
# 90-209
Hex Bolt
5/16"-18 × 1"
SS304
16×
8× # 94-116
Serrated Nut
5/16"-18
ZINC
8×
#90-209 Hex Bolt 5/16" × 1"
#98-123 Lock Washer
#98-117 Flat Washer
#94-150 Channel Nut
8×
#90-209 Hex Bolt 5/16" × 1"
#98-117 Flat Washer
#94-116 Serrated Nut
#98-149 Neoprene Spacer
# 98-149
Spacer
0.290" ID × 1.375" OD × 0.125" L
NEOPRENE
8×
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 6
1.2.2 Attach the rear hooks to the ladder clamps, with the pre-assembled hardware on the pivot bars.
TOOLS
qCordless Impact
q1/2" Socket
q1/2" Wrench
#90-225 Hex Bolt
5/16" - 18 × 2" SS304
#98-117 Flat Washer
#98-117 Flat Washer
#94-111 Lock Nut
HARDWARE USED
4× hardware is pre-assembled.
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 7
1.2.3 Slide carriage bolts on the bottom face of the crossbows.
DRIVER SIDE PASSENGER SIDE
4×4×
#90-491 Hex Bolt
5/16" × 1" SS304
#90-491 Hex Bolt
5/16" × 1" SS304
Rear crossbow
• Slide 2 pcs. of 3/4" carriage bolts.
• Slide 2 pcs. of 1" carriage bolts.
Rear crossbow
• Slide 2 pcs. of 3/4" carriage bolts.
• Slide 2 pcs. of 1" carriage bolts.
Front crossbow
• Slide 2 pcs. of 1" carriage bolts.
Front crossbow
• Slide 2 pcs. of 1" carriage bolts.
HARDWARE USED
2×
HARDWARE USED
2×
#90-487 Carriage Bolt
5/16" × 3/4" SS304
#90-487 Carriage Bolt
5/16" × 3/4" SS304
TIPS: Use tape to keep the bolts from sliding off.
NOTE: The track plug must be removed from the underneath of the front crossbow, and reinstalled
after the feet have been installed in the nal position.
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 8
1.2.4 Install the feet on the front, and rear crossbows.
HARDWARE USED
8× hand-tighten the nuts.
Carriage bolts are already on
the crossbows.
#98-123 Lock Washer
#98-117 Flat Washer
#94-105 Hex Nut
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 9
1.2.5 Fasten the ladder clamp assemblies to the rear crossbow.
HARDWARE USED
4×
Carriage bolts are already on
the crossbows.
#98-123 Lock Washer
#98-117 Flat Washer
#94-105 Hex Nut
TOOLS
qCordless Impact
q1/2" Socket
qTape Measure
qMarker
12 - 3/4"
For technical support, contact us at 1-800-565-5321 1530-TC Installation Guide |REV. D2 | Page 10
8.5"
Tighten the nuts just to hold the front
hook for adjustment.
HARDWARE USED
4× hardware is pre-assembled.
#98-123 Lock Washer
#98-117 Flat Washer
#90-491 Carriage Bolt 5/16" × 1"
#94-105 Hex Nut
TOOLS
qMarker
qCutter
1.2.6 • Pull out the 14.5" track plug on both ends of the front crossbow.
• Loosen the pre-assembled hardware on the front hooks and slide the hooks onto the
front crossbow to the position shown below.
• Cut the track plug, then attach it back to the crossbow.
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Ranger design
Ranger design
Ranger design 5044 Manual de usuario
Ranger design
Ranger design 1506-DH Cargo Plus Manual de usuario
Ranger design
Ranger design 1525-NL Manual de usuario
Ranger design
Ranger design C10-PC Manual de usuario
Ranger design
Ranger design 1530-TCX Manual de usuario
Ranger design
Ranger design 1530-FS Manual de usuario
Ranger design
Ranger design 1530-FTR Manual de usuario
Ranger design
Ranger design 76-U1236 Manual de usuario
Ranger design
Ranger design 6093-27 Manual de usuario
Ranger design
Ranger design 1525-NSX Manual de usuario
Ranger design
Ranger design C13-PC Manual de usuario
Ranger design
Ranger design S2-RA48-2 Manual de usuario
Ranger design
Ranger design 3068-DH Manual de usuario
Ranger design
Ranger design 3068-DL Manual de usuario
Ranger design
Ranger design 16-UCT66 Manual de usuario
Ranger design
Ranger design S3-RA60-3 Manual de usuario
Ranger design
Ranger design 1530-MM Manual de usuario
Ranger design
Ranger design C10-B Manual de usuario
Ranger design
Ranger design 3020-TC Manual de usuario
Ranger design
Ranger design 1530-PCX Manual de usuario
