Quantum Scalar i6 Manual de usuario

Tabla de contenidos

Otros manuales de Almacenamiento de Quantum

Quantum

Quantum ValueLoader DLT VS160 Manual de usuario

Quantum

Quantum DLT Series Instrucciones de instalación

Quantum

Quantum Travan 20GB Manual de usuario

Quantum

Quantum Scalar 1000 Manual

Quantum

Quantum DXi4510 Manual del operador

Quantum

Quantum StorNext QD6000 Manual de usuario

Quantum

Quantum Scalar 1000 Manual de instrucciones

Quantum

Quantum DAT 160 Manual de usuario

Quantum

Quantum ActiveScale X100 Manual de usuario

Quantum

Quantum Scalar 24 Manual de usuario

Quantum

Quantum DXi4510 Manual del operador

Quantum

Quantum ATL 7100 Manual

Quantum

Quantum F2000 Manual de usuario

Quantum

Quantum Scalar i500 Guía de inicio rápido

Quantum

Quantum DLTtape DLT 4000 Manual de usuario

Quantum

Quantum DLTtape SDLT 220 Manual de usuario

Quantum

Quantum Scalar i40 Instrucciones de funcionamiento y seguridad

Quantum

Quantum Q2080 Especificaciones técnicas

Quantum

Quantum A-Series FTP Manual de instrucciones

Quantum

Quantum Quantum Bigfoot CY Manual de usuario

Quantum

Quantum Scalar i80 Manual de usuario

Quantum

Quantum Tape Drive SDLT 600A Manual de usuario

Quantum

Quantum F2000 Manual de usuario

Quantum

Quantum DLT 7 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario

Scalar i6 QUICK START

The Scalar i6 features simple, cartridge-based media handling with active vault and Extended Data Life

Management (EDLM) partitions that automatically scan media for certain issues. For complete documentation,

including pre-installation requirements, refer to the Scalar i6 Documentation Center:

http://quantum.com/scalari6docs.

Activate your warranty and register your product with Quantum: www.quantum.com/startup

Your system will include a single Control Module, or a Control and at least one Expansion Module (EM).

Installing the Scalar i6

A summary of the steps is below. For details, see:

Install > Single Module Installation or Install > Multi-Module Installation.

For safety information, see Resources > Safety Information.

Step 1 Unpack the library, and remove the top cover and restraints.

Step 2 Multi-module installation only: Remove the robot and

the bottom cover; then install the bottom cover on the

bottom module of the library.

Step 3 Mount the library in the rack. For specifications, see

“Rack” in the Technical Specifications section of the

Site Planning Guide.

Step 4 Multi-module installation only: Add EMs, and install the

robot and the top cover.

Step 5 Install components, and cable the library.

Step 6 Connect to the WebGUI, and install the firmware.

Page 1

Step 7 Log on, and run the Installation Verification Test (IVT).

Expansion Module

Control Module

Local User Interface (LUI) Magazines Magazine Eject Buttons

Configuring the Scalar i6

6-68759-01 Rev A ©2019 Quantum Corporation. All rights reserved.

Page 2

*6-68759-01*

Operating and Maintaining the Scalar i6

At a minimum, you must complete the steps below to get your system up and running.

Step 1 Add licenses. See Operate > User Guide > Licenses.

Step 2 Define I/E slots. See Operate > User Guide > Library > I/E Area.

Step 3 Define cleaning slots. See Operate > User Guide > Library > Library Cleaning Slots.

Step 4 Create a partition. See Operate > User Guide > Partitions.

For information about configuring other parts of the system, such as setting the date and time, registering

the library, and configuring library contact information, see:

Install > Single Module Installation or Install > Multi-Module Installation.

Make sure to learn how coordinates work,

because this will help you locate drives,

slots, and media in your library.

See Operate > Understanding Coordinates.

Now that your system is up and running, use the Status menu to view hardware and library statuses.

Set up email notification for anyone who needs to

know about potential issues and information, such as:

•Media integrity, security, and usage

•Drive cleaning and utilization

•Reports about the system