Quantum Scalar 1000 Manual de instrucciones

Release Notes

6-00017-26 Rev A

ADIC and Scalar are registered trademarks of Advanced Digital Information Corporation. All

other product, company, or service names mentioned herein are the property of their respec-

tive owners.

Product: Scalar®1000 641A.00003

Date: December 2006

Contents

Purpose of this Release

This Scalar 1000 641 firmware release adds one new enhancement that extend the capabilities of the

Scalar 1000 Library. This document describes the new enhancement, as well as corrections made to issues

encountered in previous releases of the library. Visit www.adic.com for additional information about

Scalar 1000 641 Firmware and previous releases.

New Enhancement

The following enhancement is in this release of the Scalar 1000:

• Improved label scanning during teaching

Previously, teach values could vary as much as 2mm between teaches, which could generate SAC

7C errors.

To improve scanning accuracy and reduce variance errors, labels are now scanned at least twice.

If the X or Y value exceeds 0.5mm, either X, Y, or both are scanned again. After scanning, the

largest X value and smallest Y value are passed to the teach function to calculate cell positions.

Also, to help eliminate SAC 7B errors that occurred during teach mastering, the reach motor

extends 1mm farther while extending to the teach master bracket.

Finally, to alert users when a scanner might need replacing, during the teach a warning message

appears on the operator panel when the scan beam is not level or is jittery.

Page Topic

1 Purpose of this Release

1 New Enhancement

2 Compatibility Matrix

3 Resolved Issues

4 Known Issues

4 Documentation

2© December 2006, ADIC

Compatibility Matrix

Refer to Table 1 for information on drive and auxiliary firmware compatibility with Scalar 1000 641 firmware.

Table 1 Drive and Auxiliary Firmware Compatibility Matrix

Component Firmware Version

RMU 161A.00005, 186A.00007, and 210A.00002

SNCs

SNC 3000 3.43.18

SNC 5100 4.45.10, 4.45.15, and 4.45.16

Scalar DLC 2.6

Drive Types

LTO-1 53J1, 36UC and 4561

LTO-2 53Y2, 42D1 and 4AP0

AIT-1 04E5

AIT-2 0200_CY10

AIT-3 0209_0001

3590-B1A D0IA_572

3590-E1A D0IF_26E

DLT-4000 V151

DLT-7000 V107

DLT-8000 V80

SDLT 220 V82

SDLT 320 V82

Resolved Issues

Problems resolved in this release of Scalar 1000 641 Firmware are as follows:

Change

Request

Number

Description

25122 SAC 93 errors sometimes occurred on drives while reinitializing the library. To help eliminate

these errors, there is now a 5 second waiting period for IBM LTO drives. If an ACK is not

returned for the drive, there are two retries, resulting in a 15-second total time out. In the

event of a failure, during higher level functions the drive communications error is reported

without additional waiting.

30224 Corrects a condition in which the operator panel and Log_Sense reported the drive’s

firmware level incorrectly because a string variable was not initialized correctly.

30986 Corrects a condition that occurred when printing the log information in the 630 logs, in which

the retract retries was incorrect for previous versions.

33963 Media settings are now preserved during a firmware upgrade. (When upgrading from 630 to

640 firmware, if the media mode was set to extended it was reset to default mode after the

upgrade.)

36097 Corrects a condition in autocleaning immediate mode in which an expired AIT cleaning tape

resulted in move failure.The library now recognizes an expired AIT cleaning cartridge and

marks it expired in the database. Additional functionality has been added to force a cleaning

event on AIT 3 drives when necessary.

37030 Corrects a condition that caused a SAC 7A Reach Homing Error.

38272 Current scan velocity and cleaning cartridge information is now included in the library log.

38796 Corrects a condition that prevented toggling element addressing between old and new

styles for ADSM.

39285 The library log no longer fills with meaningless errors when the library has no RMU installed.

Only one message is generated when no RMU is installed.

39948 Corrects a condition for AIT and SDLT drives that caused SAC 7C errors due to drive

recovery functionality implemented in the 640 code.

40727 Total wait time for AIT drives is increased to 15 seconds to reduce the occurrence of SAC 93

errors. Initial wait time is now 5 seconds. If there is no response, the entire command

sequence is retried two more times, providing 15 seconds total time before reporting a drive

communication failure.

42786 Systems with LTO drives now have a longer wait time to ensure that the power-on self test

(POST) completes. This longer wait time eliminates SAC 96 errors that occurred on some

libraries when auto inventory was turned off, which resulted in shorter wait times that

prevented the POST from completing.

42795 Corrects a condition in which the SDLT get profile was incorrect, which caused SAC 7C

errors.

4© December 2006, ADIC

Known Issues

Due to a safety mechanism in the system, if you revert to a previous firmware version (for example, from

641 to 630,) the library resets the entire database to use the default values. This safety feature protects the

library against incompatibilities that might be caused by using database values from a higher firmware

version when reverting to a lower firmware version.

Documentation

The following documents are currently available for the Scalar 1000:

Document Number Document Title

6-01150-01 Scalar 1000 Planning Guide

6-00054-03 Scalar 1000 Operator Guide

6-00055-02 Scalar 1000 SCSI Reference Manual

Otros manuales para Scalar 1000

Tabla de contenidos

Otros manuales de Almacenamiento de Quantum

Quantum

Quantum DXi4500 Manual de usuario

Quantum

Quantum SuperLoader 3A Series Manual del propietario

Quantum

Quantum LTO-3 Manual de usuario

Quantum

Quantum PowerStor L200 Manual de usuario

Quantum

Quantum DXi4601 Manual de usuario

Quantum

Quantum Superloader 3 Manual de usuario

Quantum

Quantum ValueLoader LTO-1 Manual de usuario

Quantum

Quantum StorNext QM1200 Manual de usuario

Quantum

Quantum 6-67057-02 Rev A Manual de usuario

Quantum

Quantum 4000 Enhanced Instrucciones de funcionamiento

Quantum

Quantum Scalar i80 Manual de usuario

Quantum

Quantum Scalar 10K Manual de usuario

Quantum

Quantum Scalar i500 Manual de usuario

Quantum

Quantum Scalar 24 Manual de instrucciones

Quantum

Quantum ValueLoader DLT VS160 Manual de usuario

Quantum

Quantum Scalar LTFS Manual de lista de piezas

Quantum

Quantum DLT 2500 Manual de usuario

Quantum

Quantum Scalar i2000 Manual de usuario

Quantum

Quantum DAT 72 Manual de usuario

Quantum

Quantum Scalar i500 Manual de usuario

Quantum

Quantum ATL StackLink Manual de usuario

Quantum

Quantum DX100 Manual de lista de piezas

Quantum

Quantum QXS-312 Manual técnico

Quantum

Quantum P4000 Series Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario