PROAIM P-WNG Manual de instrucciones

PROAIM WING HANDHELD STEADYCAM 2

IT IS IMPORTANT THAT YOU READ AND UNDERSTAND THIS GUIDE BEFORE ATTEMPTING TO

ASSEMBLE AND USE YOUR NEW PROAIM WING HANDHELD STEADYCAM.

SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE 'ON

LINE' BY CONTACTING OUR SALES REPRESENTATIVE.

INTRODUCTION

The new HAND HELD PROAIM WING with new design of weight disc and gimbal. The PROAIM

WING is a lightweight stabilizer for cameras up to 3.5kg. The Quick release plate of the PROAIM

WING HANDHELD STEADYCAM is High quality quick release universal system for camera.

WHAT’S IN THE BOX

Please inspect the contents of your shipped package to ensure you have received all that is pic-

tured and listed below. The grey foam shipping /storage container has been especially designed

to protect your purchase while in transit and is a good place to keep your PROAIM WING

HANDHELD STEADYCAM when not in use.

CONTENTS OF SHIPPING BOX :

 PROAIM Wing Handheld stabilizer

 Quick Release plate with adapter

 4 x Counter Weight discs

 Weight Shank

 Docking stand

 Handle

 Accessory Mounng

plate

 Adapter for Accessory

Mounng plate

 Storage Case

ASSEMBLING THE PROAIM WING HANDHELD STEADYCAM

 Screw-in the handle to the stabilizer Arm.

 Now loosen the red knob as shown in the image, remove the camera mounng plate and se-

cure your camera on it with the help of screw driver.

PROAIM WING HANDHELD STEADYCAM 3

If you wish to aach provided Quick release on the wing steadycam, follow these steps:

 Loosen the ratchet knob and release the QR plate by pressing the pin. Aach the camera

plate of Wing Stabilizer to the base of QR Adapter.

 Re-aach the camera plate to Stabilizer and secure it by ghtening the red knob as shown in

the image.

 Secure your camera on QR plate, insert the camera set up to QR Adapter and ghten the

ratchet knob to secure.

 Now aach the weight disc to weight shank as per your requirement. then loosen the red

knob, insert the weight shank to the base of stabilizer and ghten the knob to secure.

 Take the accessory mounng plate adapter & knob, aach accessory mount plate to stabilizer

with the help of adapter and knob. Tighten it properly to secure.

PROAIM WING HANDHELD STEADYCAM 4

 Place the handle of stabilizer on provided docking stand for balancing.

 Camera plate has also back & forth adjustment for

quick balancing.

 You can adjust the handle back & forth for balancing.

MAINTENANCE

Bearing Maintenance

The Main Bearing on your PROAIM WING STABILIZER is of metal construcon and parally en-

closed by the Bearing assembly.

If aer a period of me your bearings don’t turn smoothly, lubricate with a minimum of light ma-

chine oil. Light lubricang oil can also be used on the Yoke and Handle Bearings.

Be sure to keep oil away from your camera, & clean up any over spill.

Cleaning

Do not use solvents or harsh cleaners of any kind on your PROAIM WING STABILIZER.

If the unit becomes dirty, use a damp so cloth or sponge and a mild detergent to gently clean

external parts.

Storage

Should you need to store your PROAIM WING STABILIZER for a long period of me then place the

unit upright in a dry or low to normal humidity area whenever possible. If you are unable to nd

this kind of environment then we suggest you store the unit in an airght plasc container or bag.

Standing the unit upright is preferred as it alleviates stress on the system.

PROAIM WING HANDHELD STEADYCAM 5

Pracce makes perfect - Walking the line

Pracce this simple exercise to master your PROAIM WING STABILIZER

with professional results.

Using masking or gaers tape, create a cross mark on a at and even wall.

The mark becomes your framing center. On the oor leading up to the

cross mark, lay a straight tape line of about 20 feet. Pracce walking the

line, while keeping the cross mark center framed and in focus. With a bit

of eort, dramac uid like movements will become second nature and

provide producon value to all your set ups.

Note:

The PROAIM WING STABILIZER doesn’t work under water, nor is it waterproof. Avoid direct expo-

sure to rain, water spray or any harsh environment.

The bearings are not sand proof. Avoid geng dirt or sand in them.

YOUR PROAIM WING HANDHELD STEADYCAM

ALL DRESSED UP AND READY TO GO

WARRANTY

We oer a limited me warranty for our products. For Mechanical products we provide a 6

month warranty & for electronic products we provide a 3 month warranty from the date of pur-

chase.

PROAIM WING HANDHELD STEADYCAM 6

We will repair or replace your product, free of charge, in the event of a defect in materials or

crasmanship obtained during normal use or handling based on the user manual. Please note

that we will not cover any shipping costs for returning the product to us. If any VAT or import du-

es are applied to the return, we will also charge these costs to the customer.

The warranty does not include, by the way of example, damage caused by products that we do-

not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,

or service by anyone other than our company.

We are not liable for incidental or consequenal damages resulng from the use of the unit or

occurring due to any breach of this warranty.

Replacement parts of the product will be provided at nominal cost (covering the cost price of the

replacement parts only) to the customers aer the Warranty Period has expired. We will cover

the complete cost of sending replacement parts within the warranty period. Aer that, Nominal

cost of the product & Actual shipping cost will be charged.

Donot send the unit to us without rst geng a response and geng the approval to send back

the item.

In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our

best to help you out.

For any other assistance you can reach us via email.

Tabla de contenidos

Otros manuales de Accesorios para cámaras de PROAIM

PROAIM

PROAIM FF-WRLS-DR Manual de usuario

PROAIM

PROAIM HS-1000 Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM VI-GLDE-01 Manual de usuario

PROAIM

PROAIM P-TWS-QS Manual de usuario

PROAIM

PROAIM DP-18 Manual de usuario

PROAIM

PROAIM P-MTCL-STD-BLK Manual de usuario

PROAIM

PROAIM JB-FLMS-01 Manual de usuario

PROAIM

PROAIM SnapRig Cage CG215 Manual de usuario

PROAIM

PROAIM QR-WV-710 Manual de usuario

PROAIM

PROAIM P-18-JS Manual de usuario

PROAIM

PROAIM JB-CMTM-01 Manual de usuario

PROAIM

PROAIM Explorer Manual de usuario

PROAIM

PROAIM DL-ANCR-02 Manual de usuario

PROAIM

PROAIM Camtree Camshade Manual de usuario

PROAIM

PROAIM 9CTH-TMP Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA DL-PLRS-01 Manual de usuario

PROAIM

PROAIM CINEMA TP-QUADO Manual de usuario

PROAIM

PROAIM PT-SPN Manual de usuario

PROAIM

PROAIM CG-014-00 Manual de usuario

PROAIM

PROAIM P-MB-600 Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario