PROAIM CINEMA Series Manual de usuario
1
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
SuperX Professional Electronic Camera Stabilizer (ST-SPRX)
Assembly Manual
2
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Proaim Super-X Stabilizer
Inbuilt Cables:
6 pin lemo to 6 pin lemo connector main cable
SDI Video Cable
Docking Bracket with Tighten knob
Camera Screw
2x 1/4"-20
2x 3/8"-16
1 x 2 pin lemo to 4pin female
XLR Connector
1 x 2 pin lemo to DC Connector 2x BNC male to BNC male connector
1 x 3 pin lemo to 4pin female
XLR Connector
1 x 3 pin lemo to DC
Connector (4mm ,3/16mm) Allen Key
3
Funcons
Camera plaorm
Front Rods (Dia:15mm)
Easy micro adjustments on X-Y axis.
Precision Gimbal for 4th-axis grip
All-aluminum CNC machined
construcon
Monitor Mount Baery rotates
180° to suit user Preference
Monitor Mount Bracket rotates
360° & Height Adjustable
Extended length Post
Handle is adjustable for
more convenience.
Video cable
Power cable
Both side baery
mount opon
Baery plate Rotate 180°
Baery Plate only 1 side
opon
2 Wire inbuilt in stabilizer
1. Main cable
2. SDI Output Cable
Micro balancing adjustment
knobs
4
Uses of Head Connector (upto 3Amps current holding capacity)
Main: As per your voltage needs, aach the lower main output
cable to the top main cable.
Dual 8V/15V OR 12/24 Volt LEMO Connector
BNC: High denion video connectors
Uses of Boom Connector of Single baery (12v/15v)
Main wire to camera plate:
Output: 12v/15v
Switch On/o Buon
Main wire to camera plate
Output: 8v/12v
BNC Video Connector
Power LED Signal
Dual D-Tap Ports
12v connectors for LCD & Other
Related Accessories
5
Uses of Boom Connector of Double Baery (15v/24v) (upto 3Amps current holding capacity)
Main wire to camera plate
Output: 15v/24v
15v Power Connectors for LCD &
Other Related Accessories
BNC Video Connector
Power LED Signal
Dual D-Tap Ports
Switch On/o Buon
On connecng the 15v power
cable, a signal will be shown in
Power LED.
24v connector for LCD & Other
Related Accessories
6
2. Aach the Stabilizer post to the u-shape frame
on the docking bracket. Push back the bracket
pin, securing the stabilizer in the bracket.
Loosen the knob of the docking bracket, put
the bracket on the stand and re-ghten the
knob to lock the docking bracket in place.
Use sandbags to stabilize the stand for security
purpose.
Stand and Docking Bracket Setup
To increase the telescopic length of the
stabilizer, loosen Allen bolts on the central
post accordingly.
1. Rotate the rod, insert it thoroughly into the
bracket and lock it so that the front pin of the
docking bracket faces upwards, as shown in the
image.
There are 2 methods to mount your super-x stabilizer onto the docking bracket.
Mount the stabilizer handle (gimbal mount) on
the front pin.
Note: Aer the stabilizer handle mounng on
the pin, there will be a gap between the
stabilizer and the c-stand.
7
Each knob has a twin on either side of the stage
to adjust the stabilizer's balance from either
side. The knobs turn clockwise on one side and
counter clockwise on the other side for the
same stage movement.
Now aach Ball Head to the LCD mount
bracket on the stabilizer and lock it with the
bolt. Fix LCD monitor (Not Included) onto Ball
Head.
Loosen the side knob to lt your LCD Monitor
up to 180°, as per your requirement.
Micro Adjustments on X-Y Axis
Maximum Rigidity and mounng opon in
Dovetail plate
You can directly aach your camera with the
Dovetail plate.
Slide in your camera onto the Stabilizer and
ghten both side knobs to secure your camera
correctly.
With the balancing done and the camera
locked in place, ne balancing can be nished
with the drives.
Baery Plates can be rotated 180°. Loosen the
allen bolts and adjust the posion as per your
requirement.
8
Slide the camera plate onto the stabilizer and
lock it with the side knob. Then insert your
compable camera.
You can also aach the camera plate to the
dovetail plate. This plate has safety stops on
the ends and several holes for mounng
screws.
Assembly of cables
Aach the power cable to the main output
connector as per your camera requirements.
Main Connector consists of two types of Power:
Single side power 8/12
Double side power 15/24v
Switch on the buon, and you will see a power
LED light signal.
On/o
LED Signal
Similarly, aach the upper inbuilt main cable to
the camera plate.
2nd inbuilt top cable can be used for video
output.
Supply power to your camera by aaching one
end of the 3 pin lemo to 4 pin female xlr
connector cable to the camera plate and 2nd
end to the camera.
Note: there are two types of power points on
the camera plate. Aach the cable to the
respecve connector as per your camera needs.
9
Supply power to your LCD by connecng 2 pin
lemo to DC Connector to the stabilizer’s
power-point and aaching it to the LCD. Check
the power point and use it as per your LCD
power requirements.
Aach 2nd lower inbuilt cable to the LCD.
BNC male to BNC male connector
We have provided 2 types of LCD cables
1. 2 pin lemo to DC Connector 2. BNC male to BNC male connector
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM SUPERX VIDEO CAMERA
STABILIZER
ALL DRESSED UP AND READY TO GO!
Otros manuales para CINEMA Series
70
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Accesorios para cámaras de PROAIM
PROAIM
PROAIM P-CSHR-01 Manual de usuario
PROAIM
PROAIM VI-TRIW-00 Manual de usuario
PROAIM
PROAIM ROM-1 Manual de usuario
PROAIM
PROAIM P-OHBP-01 Manual de usuario
PROAIM
PROAIM RS-1 Manual de usuario
PROAIM
PROAIM Explorer Pro PT-EXPR-02 Manual de usuario
PROAIM
PROAIM DL-BRZA-01 Manual de usuario
PROAIM
PROAIM SL-CNL Manual de usuario
PROAIM
PROAIM Fly 22 Manual de usuario
PROAIM
PROAIM BP-302-01 Manual de usuario
PROAIM
PROAIM CG-A7R3-01 Manual de usuario
PROAIM
PROAIM VI-SPCM-01 Manual de usuario
PROAIM
PROAIM MB-10 Manual de usuario
PROAIM
PROAIM Bazooka BZ-FLXN-01 Manual de usuario
PROAIM
PROAIM CINEMA ST-HWK-01 Manual de usuario
PROAIM
PROAIM CINEMA P-SWCC-10 Manual de usuario
PROAIM
PROAIM RN-244-00 Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM KITE-22-POPULAR Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
