POSIFLEX PS Series Manual de usuario
1
Package Contents
Fanless LCD touch terminal
(x 1)
Power adaptor (x 1)
Power cord (x 1)
User Manual (x 1)
Recovery DVD
(x 1)
(for pre-loaded OS model only)
Product Features
Fanless terminal
Intel® Celeron® Bay Trail N2807 Celeron processor, up to
2.16 GHz, Dual Core, 1MB Cache for PS-3415 /
Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz)
for PS-3415E
Foldable base that allows PS Series to be configured into
different configurations
Projected-capacitive touch
Integrated structure for side mount upgrade kit:
SA-105/205/305/405/505; back mount display: LM-6807U /
6810U and PD-360R/360UE/2609UE/6807U;
40-key dynakey attachment with MSR or RFID option:
KP-500
Water resistant structure designed for easy cleaning
PS-3415/3415E
Fanless LCD Touch Terminal
User
Manual
13110902020 Ver. A0
2
Terminal from shipping mode to operation mode
In consideration of proper packaging, before shipping, the
terminal is folded, staying in shipping mode. Thus, when
receiving the product, you will find that the terminal is well
folded, as shown below.
Before operating this terminal, unfold it and make this terminal
rise in operation mode by referring to the following steps. Here,
an equivalent model with GEN 7 base is taken below for example.
1. Firstly, lift this terminal gently to
make it to be unfolded.
2. Overturn this terminal in the
direction as indicated by the arrow
in the right figure.
3
3. Place this terminal on a flat table.
4. Tilt this terminal to a degree in the direction as indicated by
the arrow below.
Terminal from operation mode to shipping mode
To fold this terminal, refer to the following steps. Here, an
equivalent model with GEN 7 base is taken below for example.
1. Remove the cable cover.
2. Carefully hold the lower rim of the display.
4
3. Push the base-folding lever in the direction as indicated by the
arrow below (1). Then, the display will be loosen and go
down (2).
4. When the display goes down to a degree, loose the base-
folding lever, as shown in the direction as indicated by the
arrow below.
5. Then, gently tilt the display in the direction as indicated by
the arrow below until the display is well folded.
1 2
5
6. Put back the cable cover.
Views of the PS-3415/3415E
Front View
Rear View
HDD Cover
Rear I/O Cover
Hinge for LCD
Neck Cover
Cable Cover
Cable Exit
2
nd
Display Screw Hole
LCD Touch Panel
Base Stand
6
Left Side View Right Side View
Bottom View
View of I/O Interface
Top I/O Ports Rear I/O Ports
1
COM4 Port 3
Parallel (LPT) Port
Connector
2
USB 2.0 Port 4
PS/2_KB Pin Header
※
※※
※
The top I/O ports are provided for COM-based and USB-based peripheral
devices, for example, customer display.
MSR Port Cover
Bottom I/O Cover
1
2
3
4
Power Button
Brightness
Adjustment Button “+”
Brightness
Adjustment Button “-”
7
Bottom I/O Ports
1
RJ45 LAN Port 2
USB 2.0 Port
3
VGA Port 4
COM Port
(COM3/COM2/COM1)
5
RJ11 Cash Drawer Port 6
12VDC-IN Power Jack
Installing Optional Upgrade Kits and Peripherals
PS-3415/3415E can work with multiple optional upgrade kits and
peripheral devices, such as magnetic stripe reader (MSR), LCD
monitor, cash drawer and the like.
Before installing an optional upgrade kit and/or peripheral device,
make sure that the system is powered off and the external power
source is removed from the POS box to prevent electric hazard!
Failure to follow the warning description will void the product
warranty!
For the detailed instruction, refer to each of the user manuals of
the optional upgrade kits and peripheral devices.
1
2
3
4
5
6
8
Connecting Power Adapter and I/O Cables
Before connecting power adapter and I/O cables to the I/O ports
of PS series terminal, please route and arranging the cables. Refer
to the following step-by-step instruction of cable routing and
arrangement for the details. Here, an equivalent model with GEN
7 base is taken below for example.
1. Press the circled section of the
cable cover with your thumb.
2. Pull out the cable cover.
3. Push and tilt the terminal to the
end in the direction as shown by
the arrow.
Pull out
9
4. Determine that the terminal is
tilted to the end, as shown in the
right figure.
5. Press the circled section with two
thumbs and pull by force the two
sides of the locking hook with two
forefingers as indicated by the
arrow.
6. Remove the neck cover from the
base stand.
7. Tilt the terminal slightly at a little angle in the direction as
shown by the arrow, making cables easily pass through the
cable passage.
Cable Passage
10
8. Make the connector, which will be connected to the I/O port
of the terminal, pass through the cable passage of base stand.
9. Push and tilt the terminal to the
end in the direction as shown by
the arrow.
10. Remove the bottom I/O cover with
your forefinger inserting the
middle hole of the cover.
11. Connect the connector of the
power adapter to the 12VDC-IN
power jack.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Terminal táctil de POSIFLEX
POSIFLEX
POSIFLEX XT-3915 Manual de usuario
POSIFLEX
POSIFLEX Jiva LT - 8300 Manual de usuario
POSIFLEX
POSIFLEX TX-4200 Manual de usuario
POSIFLEX
POSIFLEX XT-4015-G2 Manual de usuario
POSIFLEX
POSIFLEX Jiva KS-6215 Series Manual de usuario
POSIFLEX
POSIFLEX HS-66 W Series Manual de usuario
POSIFLEX
POSIFLEX PB-7700 Series Manual de usuario
POSIFLEX
POSIFLEX KS7300 Series Manual de usuario
POSIFLEX
POSIFLEX HC-1521 Series Manual de usuario
POSIFLEX
POSIFLEX XT-5515: XT-5515Pro Manual de usuario
POSIFLEX
POSIFLEX JIVA HS-3310A Manual de usuario
POSIFLEX
POSIFLEX Jiva LT-5600 Manual de usuario
POSIFLEX
POSIFLEX HT-4712 Manual de usuario
POSIFLEX
POSIFLEX XT-4015 Manual de usuario
POSIFLEX
POSIFLEX HS-3510W-E Manual de usuario
POSIFLEX
POSIFLEX RT-2015E Manual de usuario
POSIFLEX
POSIFLEX XT-5315 Manual de usuario
POSIFLEX
POSIFLEX XT-3615 Manual de usuario
POSIFLEX
POSIFLEX LM-31XXE Manual de usuario
POSIFLEX
POSIFLEX PS-3315 Manual de usuario
