Planet NOVASwitch FNSW-8086F Manual de usuario
FNSW-8086/8088FUser'sGuide i
NOVASwitch Series
FNSW-8086F
FNSW-8088F
Fast Ethernet Fiber-optic Switch
NOVASwitchSeriesii
Trademarks
Copyright PLANET Technology Corp. 1998.
PLANET is a registered trademark of PLANET
Technology Corp. The information in this manual is
subject to change without notice. All other trademarks
belong to their respective owners.
Contents subject to revision without prior notice.
FCC Warning
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the Instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Reversion
This user's manual is for PLANET NOVASwitch Series
model --
FNSW-8086F / FNSW-8088F
Rev: 1.0 (Jun, 1998)
Part No: EMHFNSW88F
FNSW-8086/8088FUser'sGuide iii
Preface
This manual describes how to install and use the provided Fast
Ethernet Switch, which features eight ports 100BASE-FX Multi-
mode fiber ports, six ports 100BASE-FX plus two ports
10/100BASE-TX switching is also available for this product
series.
To get the most out of this manual, it is you should have an
understanding of networking concepts such as bridging, IEEE
802.3 Ethernet and 100BASE-TX Fast Ethernet, and local area
networks (LANs).
For more information about these topics, please refer to the
Appendix.
Chapter Overview
Introduction
A general overview of switching benefits and the features of the
Switch this manual accompanied with.
Installation
Everything you need to know to install and configure the Switch
with your network.
Specifications
The Switch’s specifications at a glance.
Connector Pinouts
See Appendix A for more information.
Introduction to LAN & Ethernet Technologies
See Appendix B for more information.
NOVASwitchSeriesiv
Table of Contents
INTRODUCTION ..........................................................................III
INSTALLATION...........................................................................III
SPECIFICATIONS.........................................................................III
CONNECTOR PINOUTS................................................................III
INTRODUCTION TO LAN & ETHERNET TECHNOLOGIES ............III
TABLE OF CONTENTS......................................................... IV
CHAPTER 1. INTRODUCTION ..............................................1
BENEFITS OF SWITCHING ............................................................1
EIGHT PORTS FIBER-OPTIC ETHERNET SWITCH..........................1
PRODUCT FEATURES...................................................................3
PACKING LIST.............................................................................3
FRONT PANEL.............................................................................5
Ports .......................................................................................5
LED Indication.......................................................................6
Uplink Button .........................................................................9
Activity Status.......................................................................10
CHAPTER 2. INSTALLATION..............................................13
SELECTING A SITE FOR THE SWITCH .........................................13
CONNECTING TO POWER...........................................................14
CONNECTING TO YOUR NETWORK ...........................................14
CHAPTER 3. SPECIFICATIONS...........................................17
APPENDIX A - CONNECTOR PINOUTS............................19
FNSW-8086/8088FUser'sGuide v
APPENDIX B –INTRODUCTION TO LAN & ETHERNET
TECHNOLOGIES.......................................21
FNSW-8086/8088FUser'sGuide 1
Chapter 1. Introduction
Benefits of Switching
Ethernet switching technology has dramatically boosted the total
bandwidth of a network. It puts configuration flexibility and
bandwidth adaptability into the local workgroups where the
majority of work is generated.
It further eliminates congestion problems inherent to the
CSMA/CD protocol and improves predictable response time
under heavy network loads. Expensive routing equipment was
used in the past to reduce the congestion under heavy loads.
The new wave of object-oriented client and server applications
demands higher bandwidth and tighter integration of client work
stations with servers. The old shared-access Ethernet
technology provides neither enough bandwidth nor predictable
response time for this new wave of workgroup computing.
Fast Ethernet switching not only satisfies both technical and
business requirements, but also preserves the user’s existing
investment in the huge 10 BASE-T Ethernet installed base.
This compatibility ensures a path for users to add, change, and
migrate to Fast Ethernet as demands emerge. It also provides a
low cost and flexible bandwidth solution directly to local
workgroups where the majority of work is generated, reducing
the need for expensive network equipment.
Eight Ports Fiber-Optic Ethernet Switch
The eight-port Fast Ethernet switch offered here adds 100Mbps
switching performance in a cost-effective desktop package. The
NOVASwitchSeries2
Switch has eight switching ports, each a 10/100 port capable of
autosensing both speed and half/full duplex mode.
With the demand for fiber, NOVASwitch's eight-port switch
provides another model, FNSW-8088F and FNSW-8086F in
addition to the original switch. The FNSW-8088F has eight multi-
mode fiber ports. And for FNSW-8086F, it has 6-port 100BASE-
FX ports and 2-port 10/100BASE-TX ports.
This switch makes it possible to join a 100Mbps Fast Ethernet
network to an existing 10Mbps Ethernet network (FNSW-8086F).
Its internal cache buffers the traffic from the higher bandwidth
100Mbps segment to the 10Mbps segment. If you later decide to
make both segments 100Mbps Fast Ethernet, the ports of the
switch will automatically sense the change and adjust to
100Mbps operation.
In addition to the benefits of integrating 10Mbps and 100Mbps
networks through TP ports, this switch is also useful for
segmenting networks that is bogged down with excess traffic as
a fiber-optic switching backbone. By splitting a network into
several segments and bridging them, you can cut the traffic load
on your network and reduce collisions on each segment,
especially if you can minimize intersegment traffic by placing
users and devices that normally talk to each other on the same
segment.
This switch fully complies with IEEE802.3u, 100BASE-TX,
100BASE-FX, IEEE802.3, and 10BASE-T standards. It features
"wire-speed”switching mechanisms as well as the ability to filter
local traffic, collisions, and error packets to maximize network
performance.
FNSW-8086/8088FUser'sGuide 3
This eight-port switch also facilitates an affordable and efficient
migration path to 100Mbps Fast Ethernet and can continue to
enhance your network's performance even if you upgrade your
existing network with standard Ethernet applications,
internetworking systems and client-side adapters to minimize
migration costs.
Product Features
This eight-port switch provides the following features:
♦Eight 100BASE-FX switching ports (ST Interface)
♦Full-duplex support on each port (default) for up to 2Km wiring
♦Two-port 10/100BASE-TX, with six-port 100BASE-FX for
multiple choice of TP wiring
♦Designed in compliance with 10BASE-T, IEEE802.3u,
100BASE-TX and 100BASE-FX standards.
♦Comprehensive array of LED indicators that communicate the
status of the switch and troubleshooting information.
♦Dynamic learning mode that automatically adjusts to the
network configuration.
♦Runt and CRC filtering eliminates erroneous packets to optimize
network bandwidth.
♦Full compatibility with standard Ethernet applications,
internetworking systems and client-side adapters to minimize
migration costs.
Packing List
NOVASwitchSeries4
When you unpack the switch, you should find the items listed
below. Please inspect the contents, and report any apparent
damage or missing items immediately to your authorized reseller.
The Eight-port Switch
Users Manual
AC power cord
Rack Mount Ears with Screws
Otros manuales para NOVASwitch FNSW-8086F
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Planet
Planet
Planet IGS-6325-4T2X Manual de usuario
Planet
Planet FSD-805 Manual de usuario
Planet
Planet IGS-501T Manual de usuario
Planet
Planet WGS-5225-8UP2SV Manual de usuario
Planet
Planet KVM-210 Series Manual de usuario
Planet
Planet HPOE-460 Manual de usuario
Planet
Planet IGS-1020PTF Series Manual de usuario
Planet
Planet IGSW-2840 Manual de usuario
Planet
Planet GS-5220-8UP2T2X Manual de usuario
Planet
Planet FSD-808P Manual de usuario
Planet
Planet IGS-6325 Series Manual de usuario
Planet
Planet IGS-504HPT Manual de usuario
Planet
Planet GSW-1602SF Manual de usuario
Planet
Planet FSD-804P Manual de usuario
Planet
Planet NOVASwitch GSW-1200S Manual de usuario
Planet
Planet WGSW-28040 Manual de usuario
Planet
Planet IGS-6325-16T4X Manual de usuario
Planet
Planet WGSD-910 Manual de usuario
Planet
Planet IKVM-8010 Manual de usuario
Planet
Planet FSD-808HP Manual de usuario
