Planet LRP-822CS Manual de usuario
Multi-port Coax + 2-port 10/100/1000T + 2-port
100/1000X SFP Long Reach PoE over Coaxial
Managed Switch
LRP-822CS / LRP-1622CS
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
4. Logon to the Console .................................................................................. 6
5. ConguringIPAddressviatheConsole ........................................................ 7
6. SavingtheCongurationviatheConsole...................................................... 9
7. Starting Web Management .........................................................................10
8. Starting Long Reach PoE Communication .....................................................12
9. SavingCongurationviatheWeb ...............................................................16
10.RecoveringBacktoDefaultConguration ....................................................17
11. Customer Support.....................................................................................18
3
1. Package Contents
ThankyouforpurchasingPLANET Multi-portCoax +2-port 10/100/1000T+ 2-port
100/1000XSFPLongReachPoEoverCoaxialManagedSwitch.
Thedescriptionofthismodelisshownbelow:
LRP-822CS 8-portCoax+2-port10/100/1000T+2-port100/1000XSFP
LongReachPoEoverCoaxialManagedSwitch
LRP-1622CS 16-portCoax+2-port10/100/1000T+2-port100/1000XSFP
LongReachPoEoverCoaxialManagedSwitch
“LRP Managed Switch” is used as an alternative name in this Quick Installation
Guide.
Open the box of the LRP Managed Switch and carefully unpack it. The box should
containthefollowingitems:
zTheLRPManagedSwitchx1
zQuickInstallationGuidex1
zRubberFeetx4
zPowerCordx1
zRS232toRJ45ConsoleCablex1
zSFPDustCapx2
zBNCFemaleDustCapx8(LRP-822CS)
zBNCFemaleDustCapx16(LRP-1622CS)
zWarningStickerx8(LRP-822CS)
zWarningStickerx16(LRP-1622CS)
zRack-mountAccessoryKitx1
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheLRPManagedSwitch.
zEthernet Port Connection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web Browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
the LRP Managed Switch. If the Web interface of the LRP Managed
Switch is not accessible, please turn off the anti-virus software or
firewallandthentryitagain.
5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to the RJ45 type of the console port of the LRP Managed
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: LRP Managed Switch Console Connectivity
A terminal program is required to make the software connection to the LRP
ManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud :115200
zDatabits :8
zParity :None
zStopbits :1
zFlowcontrol :None
Figure 3-2: COM Port Conguration
6
4. Logon to the Console
Once the terminal is connected to the device, power on the LRP Managed Switch,
and the terminal will display “running testing procedures”. Then, the following
message asks to log-in user name and password. The factory default user name
andpasswordareshownasfollows,andtheloginscreeninFigure4-1appears.
Username:admin
Password:admin
Figure 4-1: LRP Managed Switch Console Login Screen
The user can now enter commands to manage the LRP Managed Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new
passwordafterthisfirstsetup.
2.Only accept command in lowercase letter under console
interface.
7
5.ConguringIPAddressviatheConsole
TheLRPManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP address
1.Atthe“LRP-series#”prompt,enter“show ip”.
2.The screendisplaysthe currentIP address,SubnetMask andGatewayasshown
inFigure5-1.
Figure 5-1: IP Information Screen
ConguringIPaddress
3.Atthe“LRP-series#”prompt,enter“congure”.
4.Atthe“LRP-series (cong)#”prompt,enterthefollowingcommandandpress
<Enter>asshowninFigure5-2.
LRP-series(cong)# ip address 192.168.1.100 mask 255.255.255.0
LRP-series(cong)# ip default-gateway 192.168.1.254
8
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Gateway:192.168.1.254
Figure 5-2: IP Address Screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the LRP Managed Switch will apply the new IP
addresssettingimmediately. Youcan accessthe Web interfaceof theLRP Managed
SwitchthroughthenewIPaddress.
Note
If you are not familiar with console command or the related
parameter,enter“?”anytimeinconsoletogetthehelpdescription.
9
6.SavingtheCongurationviatheConsole
In the switch, the running conguration le stores in the RAM. In the current
version, the running conguration sequence running-cong can be saved from the
RAMtoFLASHbywritingthecommand or copying the running-cong startup-
cong command, so that the running conguration sequence becomes the startup
congurationle,whichiscalledcongurationsave.
1.At the “LRP-series#” prompt, enter “copy running-cong startup-cong”
asshowninFigure6-1.
Figure 6-1: The Conguration Screen
10
7. Starting Web Management
The following shows how to start up the Web Management of the LRP Managed
Switch. Note the LRP Managed Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set on the same IP
subnet address.
Forexample,thedefaultIPaddressoftheLRPManagedSwitchis192.168.0.100,
then the manager PC should be set at 192.168.0.x (where x is a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 7-1: IP Management Diagram
Logging in to the LRP Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password“admin”.TheloginscreeninFigure7-2appears.
DefaultUsername:admin
DefaultPassword:admin
Figure 7-2: Login Screen
Otros manuales para LRP-822CS
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Planet
Planet
Planet FSD-504HP Manual de usuario
Planet
Planet FSD-Series Manual de usuario
Planet
Planet FSD-504HP Manual de usuario
Planet
Planet GSD-801 Manual de usuario
Planet
Planet FSD-5816 Manual de usuario
Planet
Planet GS-5220-8P2T2S Manual de usuario
Planet
Planet WGSD-1022 Manual de usuario
Planet
Planet WGSW-20160HP Manual de usuario
Planet
Planet VC-1602 Manual de usuario
Planet
Planet VC-820M Manual de usuario
Planet
Planet XGS-6320-8X8TR Manual de usuario
Planet
Planet GSW-1601 Manual de usuario
Planet
Planet XGSW-28040 Manual de usuario
Planet
Planet IGS-20160HPT Manual de usuario
Planet
Planet FGSD-1022 Manual de usuario
Planet
Planet IGSW-24040T Manual de usuario
Planet
Planet FSD-805 Manual de usuario
Planet
Planet IGS-1000 Series Manual de usuario
Planet
Planet MGSD-10080F Manual de usuario
Planet
Planet KVM-800 Manual de usuario
