Pickering 40-280 Manual de usuario

pickeringtest.com

Issue 3.3 January 2020

40-280/281/282 User Manual

PXI Selectable Resistor Module

Page (II) SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy reference should be made to the safety instructions for

provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options For Pickering PXI Modules ............4.1

Module Architecture 40-280.................................................4.2

Module Architecture 40-281.................................................4.3

Module Architecture 40-282.................................................4.4

Programming The Module ....................................................4.5

Section 5

Connector Information................................................................5.1

40-280 .....................................................................................5.1

40-281 .....................................................................................5.2

40-282 .....................................................................................5.3

Section 6

Trouble Shooting.........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Resistor Information .............................................................7.1

Relay Lookup Tables 40-280................................................7.2

Relay Lookup Tables 40-281................................................7.4

Relay Lookup Tables 40-282................................................7.6

CONTENTS

Page (VI) SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

Page (VII)

2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the host chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of

slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale.

This module must not be used for the switching of Mains Circuits. For the switching of voltages up

to the module’s full specication, Secondary Circuit power supplies and the Device Under Test must

be fully isolated from the Mains Circuit and the safety earth.

The host chassis must be correctly installed and be connected to mains or factory safety ground,

please refer to your chassis installation manual.

Diagram Showing Separation Between The Mains Circuit and Secondary Circuit / DUT

For the purposes of this document, a Mains Circuit is an installation classied as Overvoltage

Category II up to 300V. Separation between the Secondary Circuit and Mains Circuit is achieved

by a transformer in which the primary windings are separated from the secondary windings by

reinforced insulation, double insulation, or a screen connected to the protective conductor terminal.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

PXI Switching

Module

Device

Under Test

Power

Supply

Power

Supply

Host Chassis

Secondary Circuit

Mains

Circuit

Mains

Circuit

Mains/Factory

Safety Ground

Page (VIII) SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

Page (VIII) 2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O

signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

SELECTABLE RESISTOR MODULE 40-280/281/282

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

PXI Selectable Resistor Module 40-280/281/282

ISSUE 9.0 APR 2018

• High Density Selectable Resistor Module

• Up to 48 Separate Channels of Switchable

Resistors

• Customer Deﬁned Resistor Values

• Channels Can be Set as Open or Short Circuit or a

Pre-set Resistor Value (40-280)

• Version Available With Switchable Offset

Resistance (40-281)

• Potential Divider Version Available (40-282)

• Uses High Reliability Pickering Reed Relays For

Maximum Performance

• VISA, IVI & Kernel Drivers Supplied for Windows

• Supported by PXI or LXI Chassis

• 3 Year Warranty

The 40-280 series provides a cost effective, high-density solution

for applications requiring a high channel count of simple resistor

congurations.

The 40-280 provides up to 48 isolated channels, each of which can

be programmed as a short circuit, an open circuit or a xed resistor

value.

The 40-281 provides up to 24 isolated channels, each of which can

be set as an open circuit, an offset resistor value or a xed resistor

value plus the offset.

The 40-282 is a potential divider with up 24 separate channels.

This can be used to emulate potentiometer devices, each channel

having a xed R1 R2 ratio. Additionally, the centre point can be

shorted to either of the potentiometer end points.

Modules are supplied without any resistors tted, permitting the

user to t the values required. The exibility of this allows users

to select components that best meet their application needs.

Alternatively, please contact the Pickering Sales Ofce if the

module is required pre-tted with resistors.

All versions of the 40-280 series use high quality instrument grade

reed relays to ensure long service life. The modules are ideal

for applications involving go/no-go testing where emulation of

adjustable components or remote sensors is required. The modules

provide a lower cost and higher density solution than approaches

using fully programmable resistor chains.

OUT

Vout

Vref

Vin

RRRoffset

40-280 Single Resistor Card 40-281 Dual Resistor Card 40-282 Potential Divider

Simpliﬁed Block Diagrams for one channel of the 40-280/281/282 Selectable Resistor Modules

Page 1.2 SELECTABLE RESISTOR MODULE 40-280/281/282

pickering

SECTION 1 - TECHNICAL SPECIFICATION

Selectable Resistor – 40-280/281/282

pickeringtest.com

Speciﬁcations

Power Requirements

+3.3V +5V +12V -12V

00.57A max 0 0

Operating/Storage Conditions

Operating Conditions

Operating Temperature:

Humidity:

Altitude:

0°C to +55°C

Up to 90% non-condensing

5000m

Storage and Transport Conditions

Storage Temperature:

Humidity:

Altitude:

-20°C to +75°C

Up to 90% non-condensing

15000m

PXI & CompactPCI Compliance

The module is compliant with the PXI Specication 2.2. Local Bus,

Trigger Bus and Star Trigger are not implemented.

Uses a 33MHz 32-bit backplane interface.

Safety & CE Compliance

All modules are fully CE compliant and meet applicable EU

directives: Low-voltage safety EN61010-1:2010, EMC Immunity

EN61326-1:2013, Emissions EN55011:2009+A1:2010.

Switching Speciﬁcation

Switch Type: Ruthenium Reed

Max Switch Voltage: 150VDC/100VAC*

Max Power:

Max Switch Current:

Max Carry Current:

10W

0.5A

1.2A

Initial On Path Resistance:

Off Path resistance:

Thermal Offset:

<1Ω (500mΩ nominal)

>109Ω

<10µV

Operate Time:

Release Time:

<0.5ms, 0.25ms typical

Expected Life, low power load:

Expected Life, full power load:

1x109operations

>1x106 operations

* For full voltage rating, signal sources must be fully isolated from

mains supply and safety earth.

Resistor Speciﬁcation

Resistor Value: Customer specied

Resistor Tolerance: Customer specied

Resistor Power: 0.5W

Mechanical Characteristics

Single slot 3U PXI (CompactPCI card).

3D models for all versions in a variety of popular le formats are

available on request.

Connectors

PXI bus via 32-bit P1/J1 backplane connector.

Signals via front panel 96-pin male micro-D connector, for pin outs

please refer to the operating manual.

PCB Layout for the 40-280 Selectable Resistor Module

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Pickering

Pickering

Pickering 40-262 Manual de usuario

Pickering

Pickering 40-618A Manual de usuario

Pickering

Pickering PXi 41-720 Manual de usuario

Pickering

Pickering PXI 41-752 Manual de usuario

Pickering

Pickering 40-565A Manual de usuario

Pickering

Pickering PXI BRIC 40-595A Manual de usuario

Pickering

Pickering PXI BRIC 40-560A Manual de usuario

Pickering

Pickering PXI 40-795-001 Manual de usuario

Pickering

Pickering 40-553A Manual de usuario

Pickering

Pickering 40-670A Manual de usuario

Pickering

Pickering 40-650A Manual de usuario

Pickering

Pickering 40-656A Manual de usuario

Pickering

Pickering 43-182B Manual de usuario

Pickering

Pickering PXI 30 A Manual de usuario

Pickering

Pickering Pxi 41-182A Manual de usuario

Pickering

Pickering PXI 40-664A Manual de usuario

Pickering

Pickering 40-587B Manual de usuario

Pickering

Pickering SYSTEM 10 Manual de usuario

Pickering

Pickering Module Manual de usuario

Pickering

Pickering 4 785C Series Manual de usuario

Pickering

Pickering 40-592A Manual de usuario

Pickering

Pickering SYSTEM 10 Manual de usuario

Pickering

Pickering 40-574 Manual de usuario

Pickering

Pickering 4x-727A Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario