Pickering PXI 40-855 Manual de usuario

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

Page (1)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Issue 4.2 May 2017

User Manual

MEMS Fiber Optic Switch Module

(Model No. 40-855)

pickeringtest.com pickering

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (II)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (III)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (IV)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy and reference should be made to the safety instructions for

provisions of lifting and moving.

LASER PRODUCT

This product is capable of switching laser optical signals.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (V)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options For Pickering PXI Cards.................4.1

Module Architecture 40-855.................................................4.3

Programming The Module 40-855.......................................4.4

Section 5

Connector Information................................................................5.1

Section 6

Trouble Shooting .........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Relay Lookup Tables.............................................................7.1

Component Layout................................................................7.2

CONTENTS

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (VI)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

THIS PAGE INTENTIONALLY BLANK

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (VII)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Page (VII)

REED RELAY MODULE 40-110/115/120/125

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the PXI/LXI chassis are populated with blanking plates to prevent access to user

I/O signals that may be present. Blanking panels are available to order from Pickering in a variety

of slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

WARNING - RISK OF INJURY SYMBOL

This product may be specically designed to switch optical signals. Under no circumstances look

into the end of an optical output or an optical cable attached to an optical output. LASER RADIATION

CAN SERIOUSLY DAMAGE YOUR EYESIGHT.

Read and understand the safety information of the laser source connected to the optical switch.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page (VIII)

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering

Page (VIII) REED RELAY MODULE 40-110/115/120/125

pickering

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user

I/O signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• Modules are not accessed to EN 60825, users should observe the safety instructions and laser

class for the 3rd party laser source.

• The module may be capable of switching optical signals from a laser device; do not stare directly

at the user I/O ports.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Page 1.1

MEMS FIBER OPTIC SWITCH MODULE 40-855

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

40-855

MEMS Fiber Optic Switch

●Single, Dual, Triple or Quad 2 to 1 Fiber Optic

Multiplexer

●High Density 1, 2 or 3 Slot Width Modules

●FC/APC, FC/PC or SC/PC Connectors

●Small Form Factor Connectors LC

or MU (mini SC)

●1240 to 1640nm Single Mode

●700 to 1700nm Multi-Mode

●Return Loss >55dB

●Long Operating Life >109Operations with High

Repeatability ± 0.01dB and Good Temperature

Stability

●Crosstalk -60dB Typical

●1ms Typical Switching Time

●VISA, IVI & Kernel Drivers Supplied for

Windows

●Supported by PXI or LXI Chassis

●3 Year Warranty

Pickering PXI Fiber Optic MEMS Switching modules are

available in many high density formats with a choice of

5 different connector styles to suit most applications:

FC/APC (for optimal performance), FC/PC and SC/PC

for general applications and LC and MU for high density

applications.

The ﬁber optic multiplexers connect the optical channel

by redirecting the optical signal into a selected output

ﬁber. This is achieved using Micro-Mechanical Mirrors

driven by a highly precise mechanism and activated via

an electrical control signal.

The range of MEMS (Micro-Electro-Mechanical-Systems)

based optical switches is:

40-850 – Single or Dual 4 Channel Multiplexer

40-852 – Single 8 Channel Multiplexer

40-855 – Single, Dual, Triple or Quad 2 Channel

Multiplexer

Pickering will construct custom optical systems to

customers precise requirements. We have a large

range of electrical switching modules which can form a

complete PXI based telecom switching solution.

MEMS technology offers many advantages over

traditional Optical Prism Technology as used in module

types 40-810/815/820. MEMS offer similar optical

performance but with lower price, higher packing density,

faster operate time and much longer operating life.

Block Diagram of Dual 2 Channel Fiber Optic

Multiplexer

Key Features

• Very fast operate time <1ms

• Very long life >109operations

• Return loss greater than 55dB

• High repeatability over a broad range of

environmental conditions

• High density

Applications

• Optical signal routing

• Fiber network conﬁguration

• Fiber Optic Component Test

Common

Channel 1

Channel 2

Common

Channel 1

Channel 2

Channel 3

Channel 4

Common

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

Channel 1

Channel 2

Set State

Reset State

ISSUE 5.1 MAY 2017

40-855-012

2 Channel

Fiber Optic

Multiplexer

Common

Channel 1

Channel 2

Common

Channel 1

Channel 2

Channel 3

Channel 4

Common

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

Channel 1

Channel 2

Set State

Reset State

Common

Channel 1

Channel 2

Common

Channel 1

Channel 2

Channel 3

Channel 4

Common

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

Channel 1

Channel 2

Set State

Reset State

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Tabla de contenidos

Otros manuales de Unidad de control de Pickering

Pickering

Pickering PXI BRIC 40-562A Manual de usuario

Pickering

Pickering 40-265 Manual de usuario

Pickering

Pickering Pxi 41-660 Manual de usuario

Pickering

Pickering PXI BRIC 40-563A Manual de usuario

Pickering

Pickering 40-290-021 Manual de usuario

Pickering

Pickering SYSTEM 10 Manual de usuario

Pickering

Pickering 40-519A Manual de usuario

Pickering

Pickering 40-553A Manual de usuario

Pickering

Pickering 40-656A Manual de usuario

Pickering

Pickering 40-651 Manual de usuario

Pickering

Pickering 40-670A Manual de usuario

Pickering

Pickering SYSTEM 10 Manual de usuario

Pickering

Pickering PXI 40-597 Manual de usuario

Pickering

Pickering 60-553 Manual de usuario

Pickering

Pickering 40-670 Manual de usuario

Pickering

Pickering 40-581 Manual de usuario

Pickering

Pickering 40-727 Manual de usuario

Pickering

Pickering PXI BRIC 40-595A Manual de usuario

Pickering

Pickering Module Manual de usuario

Pickering

Pickering 40-580 Manual de usuario

Pickering

Pickering 40-527A Manual de usuario

Pickering

Pickering 40-781 Manual de usuario

Pickering

Pickering 40-670A Manual de usuario

Pickering

Pickering 40-540 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario