Jbc CD-SC Manual de usuario

www.jbctools.com

Precision Soldering Station

Ref. CD-SC

T210-A

Precision Handpiece

C210001

C210008

Cartridges

MANUAL

POWER CORD

www .j bc to ol s. co m

S0354 Sponge

CL6210 Brass Wool

CD-2C / CD-1C / CD-9C

Control Unit

CD-SC / PRECISION SOLDERING STATION

Precision Soldering Station

Ref. CD-SC

Power Cord Socket

Main switch

Fuse

Cable collector

Quick Tip Changer

Tip Cleaning System

Process Control

Intelligent Heat Management

Equipotential connection

CONTROL UNIT

T210-A

Precision

Handpiece

USB-B connector to PC:

- Update station software

- Create graphs of the soldering process

- Manage and monitor parameters via PC

INSTALLATION

PART NAMES

Loosen the tightening knob to adjust the

position of the cable collector.

ADJUSTABLE STAND

CABLE COLLECTOR

The tool stand is easily adjustable. Loosen the tightening knob to adjust the position.

Slide the green piece down to place the wire.

CD-SC / PRECISION SOLDERING STATION

Tap smoothly the cartridge on the wiper profile to

remove the excess of solder

Provides a deeper cleaning on the tip.

CL6205 Inox Wool

TAPPING WIPING

Full set of clean option: sponge, metal wool and brush

S0331 Sponge S0354 Sponge

Use the slots to wipe any posible particle sticked

on the tip

More agressive on the tip than the wool.

CL6220 Brushes

The smoothest cleaning method. The sponge has to be kept wet (not soaked) using distilled water.

CLEANING OPTIONS

Alignment

Place the handpiece on top of the new

cartridge, press it slightly down and remove

the handpiece from the extractor.

Place the handpiece in the extractor and

remove the cartridge.

Press the cartridge into the opening A, B or C:

A. For straight C210 cartridges.

B. For curved C210 cartridges.

C. For C245 cartridges.

QUICK TIP CHANGER

Important

It is essential to insert the cartridge till the

end for a good connection. Use the mark as

reference.

CD-SC / PRECISION SOLDERING STATION

T210-A Precision Handpiece

These handpieces are perfect For precision applications with medium power requirements.

Use C210 cartridge range

HANDPIECE

CONNECTABLE HANDPIECES

T245-A* Handpiece

For general soldering purposes with high power requirements.

T245-PA* Blue Handpiece

Used for leaded jobs

T470-A* Comfort Handpiece with screw

It incorporates a screw for securing the cartridges.

T470-SA* Long Handpiece (3m cable)

T470-FA* Comfort Handpiece

It incorporates a foamed grip of insulating material which makes you feel

more comfortable when working

T470-MA* Long Comfort Handpiece

(3m cable)

T210-PA Precision Blue Handpiece

The blue grip allows the user to differentiate the tool for leaded jobs from the lead-free ones.

Use C210 cartridge range

*These handpieces only works with C245 cartridge range for this station.

F3450 Fume Extractor (not included)

Easily clips onto the handpiece and can be quickly removed for easy

maintenance.

ACCESSORIES

Selected temp.

350

Power 10%

350

Main menu

Counters

Tool settings

Exit

1 Reset settings

Station settings

Tool settings

Plugged hours 0

Working hours 0

Sleep hours 0

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

4 Counters

Program version

Hibernation hours 0

No tool hours 0

6 Sleep cycles

Sleep temp 180

Hibernationdelay

0 min

Temp adjust + O

Tool 210

Back

Station settings

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Help text OFF

5 Beep ON

Change PIN

Back

CONTROL SCREEN

SETTINGS MENU

Tip temperature

Decrease &

move down

Increase &

move up

Access Menu &

Confirm Selection

% Instant power supplied

to the tool

Original PIN: 0105

CD-SC / PRECISION SOLDERING STATION

Expected life

(hours)*

Sleep

Temp

Working

Temp

Temp (ºC)

700

600

500

400

300

200

200 225 250 275 300 325 350 375 400 425 450

100

JBC stations intelligently manage the tool temperature and it helps to extend the tip life:

Heat management increase tip life which reduces cost of ownership.

HEAT MANAGEMENT

Work mode: Lift tool from the stand and the tool tip heats up to the selected temperature.

Sleep mode: When the tool is in the stand, the temperature reduces (preset sleep temperature is

180ºC / 360ºF).

Hibernation mode: After longer periods of inactivity (pre-set to 30 minutes), the power is cut off and

the tool cools down to room temperature.

CD-SC / PRECISION SOLDERING STATION

MAINTENANCE

Before carrying out maintenance or storage, always allow the equipment to cool.

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

- Maintenance shall not be carried out by children unless supervised.

Remove the fuse by pulling the black cap. Help

yourself with a lever tool if necessary.

Place the new fuse into the holder by pushing

and enter it again into the station.

Clean periodically

- Clean the station’s screen with a glass cleaner or

a damp cloth.

- Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat transfer to the solder joint.

- Periodically check all cables and tubes connected.

- Replace the fuse if it is blown according to the following guidelines:

- Use a damp cloth to clean the case and the

tool. Alcohol can be used only to clean the

metal parts.

- Check periodically that the metal parts of the

tool/stand are clean in order to have a good

detection when the tool is in the stand.

Tabla de contenidos

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc CD-SC Manual de usuario

Manuales populares de Pistola de soldar de otras marcas