Jbc CD-SQF Manual de usuario

Compact Soldering Station

Ref. CD-SQF

INSTRUCTION MANUAL

www.jbctools.com

Packing List

The following items are included:

Power Cord .................................................... 1 unit

Ref. 0023715 (120V)

0023714 (230V)

0024092 (100V)

Manual ............................................................. 1 unit

Ref. 0023915

CD Control Unit ............................................1 unit

Ref. CD-1F (120V)

CD-2F (230V)

CD-9F (100V)

Brass Wool .................................................... 1 unit

Ref. CL6210

Sponge ............................................................ 1 unit

Ref. S0354

Precision Purpose Handle .................... 1 unit

Ref. T210-A

Power Socket

Main Switch Earth Fuse

Equipotential Connection

USB-B Connector

Features and Connections

Cable Collector

Quick Tip Changer

Process

Screen

Adjustable Stand:

Intelligent Heat Management

Tip Cleaner Brass Wool

with Antisplash Membrane

and Wiper

Fuse

Fume Extractor Connector

Cartridge Storage

Precision Purpose

Handle

Ref. T210-A

www.jbctools.com

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

CD-Q:

Adjustable Stand Cable Collector (Ref. CC1001)

Adjust the tool stand to suit

your work position.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0017576

When using the brass wool, it prevents

splashing of solder particles.

Antisplash Membrane

R ef. 0 017574

Prevents splashing and keeps

the work area clean.

Brass Wool

Ref. CL6210

Very effective cleaning

method. Leaves a

small layer of solder

on the tip preventing

oxidation between

cleaning and rewetting.

Wiper

Ref. CL0160

A temperature resistant receptacle for removing

excess solder by gently tapping or wiping.

If the tip is very dirty,

JBC recommends first

cleaning it with the wiper

to remove excess solder.

The Cable Collector keeps the cable away from the work area

and prevents that the weight of the cable from disturbing the

operator while soldering.

Insert the cable into the clip

and then insert into the Cable

Collector. Do not leave the

cable longer than necessary

to reach the work area freely.

The Cable Collector is

flexible. It accompanies and

adapts to the movements

during the soldering process.

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

CD-Q:

Adjustable Stand Cable Collector (Ref. CC1001)

Adjust the tool stand to suit

your work position.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0017576

When using the brass wool, it prevents

splashing of solder particles.

Antisplash Membrane

R ef. 0 017574

Prevents splashing and keeps

the work area clean.

Brass Wool

Ref. CL6210

Very effective cleaning

method. Leaves a

small layer of solder

on the tip preventing

oxidation between

cleaning and rewetting.

Wiper

Ref. CL0160

A temperature resistant receptacle for removing

excess solder by gently tapping or wiping.

If the tip is very dirty,

JBC recommends first

cleaning it with the wiper

to remove excess solder.

The Cable Collector keeps the cable away from the work area

and prevents that the weight of the cable from disturbing the

operator while soldering.

Insert the cable into the clip

and then insert into the Cable

Collector. Do not leave the

cable longer than necessary

to reach the work area freely.

The Cable Collector is

flexible. It accompanies and

adapts to the movements

during the soldering process.

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

Removing the Splashguard

1. Unlock the splashguard. 2. Lift off.

Lock

More cleaning options (not supplied):

Inox Wool

Ref. CL6205

Stronger cleaning

method than brass

wool.

Metal Brush

Ref. CL6220

When used carefully,

it provides a more

thorough cleaning.

Sponge

Ref. S0354

Tapping:

Tap gently to remove excess

solder.

Wiping:

Use the slots to remove

remaining particles.

Wiper

Ref. CL0160

The softest cleaning method.

Keep the sponge damp with

distilled water when working

to avoid tip wear.

www.jbctools.com

CD-Q:

Changing the Grips

Put the slide-on tabs into the

new grip.

Push the grip with the tabs

onto the handle.

Hold the grip and pull the tab.

Use a pliers if necessary.

tabs

new grip

Easily replace the grips using the slip-on tabs. Note: For the different handles are different grips avai-

lable.

1. Inserting Tabs 2. Inserting Handle 3. Removing Tabs

The sealing plug prevents undesirable flux vapors or particles from entering inside the tool. Its usage

is highly recommended for intensive applications when soldering is exposed to FOD environments

or for applications where the soldering iron works close to vertical position. Note: For the different

handles are different sealing plugs available.

Sealing Plug Replacement

Before replacing the sealing plug, unplug the power supply and make sure the device is not hot.

Note: The chamfered side

has to be positioned towards

the handle.

2. Mounting Position 3. Inserting Sealing Plug1. Removing Sealing Plug

Sealing

Plug

Handle

Push the sealing plug inside

the handle until the sealing

plug and handle edges are

aligned.

Enter, not deeper than 8mm,

a small shaft or screwdriver

and lift and pull the sealing

plug. Never use a cartridge to

do this operation.

Handels: T245-A / T245-C / T245-GA T210-A / T210-NA T245-PA T210-PA

Grip ref.: 0016057 (green) 0018658 (green) 0021528 (blue) 0023310 (blue)

Handels: T245 / T470 T210

Sealing plug ref.: OB2000 OB1000

ø 1

ø 1,5

ø 3,5

AAB

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

Quick Tip Changer

Conical Chisel Conical

bent

Bevel Special

models

Compatible Cartridges

The CD-B stations work with C245 cartridges and T245 handles.

Find the model that best suits your soldering needs in www.jbctools.com

Save time and change cartridges safely without switching the station off.

1. Removing 2. Inserting 3. Fixing

Place the handpiece in the

extractor and pull to remove

the cartridge.

Place the handpiece on top

of the new cartridge and

press down slightly.

Use the holes for fixing the

cartridge* as follows:

A. For straight C210.

B. For curved C210.

C. For C245.

*Important: It is essential to insert the cartridges as far as the mark for a proper connection.

Mark

The CD-S stations work with C210 cartridges and T210 handles.

Find the model that best suits your soldering needs in www.jbctools.com

www.jbctools.com

Power 5%

350

Selected temp

350

Sleep temp 150

Sleep

350

Tool in the stand, no heat

Hibernation

350

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

TOOL

EARTHING FUSE

AUX

USE ONLY WITH A 250 V FUSE

Operation

The JBC Most Efficient Soldering System

This revolutionary technology is able to recover tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, tip life increases by 5.

· Change temperature

(from 90 to 450ºC)

Steps ± 5

Steps ± 50

Through menu settings:

· Select temperature levels

· Fix one temperature

Through menu settings:

·Change Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

Through menu settings:

· Change Hibernation delay

(from 0 to 35 min)

Long time in

the stand

1. Work 2. Sleep 3. Hibernation

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Main menuMain menu

4 Counters

Program version

Exit

1 Reset settings

Station settings

Tool settings

No tool hours 0

6 Sleep cycles

Tool 210210

BackBack

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

5 Beep ON

6 QST ON

PIN ON

Change PIN

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Metronome ----

Plugged hours 0

Working hours 0

Sleep hours 0

4 Hi

bernation hours 0

Total CountersTotal Counters

Tool settingsTool settings

Station settingsStation settings

Selected temp.

350350

Power 5%Power 5%

Fixed temp.

350350

Levels ºC

270270 350350 400400

-10-10

Sleep temp 150

Hibernationdelay 10 min

Temp adjust + O

Tool 210210

BackBack

350

EARTHEARTH

FUSEFUSE

Station troubleshooting available on the product page at www.jbctools.com

Troubleshooting

Menu Screen

Default PIN: 0105

The work screen provides

useful information of tool

status in real time.

Work Screen

Control Process

Displays a specific fixed temp.

Shown when you have selected

temp. levels. The values must be

adjusted for the task.

“Temp. Adjust” parameter.

It provides a more precise

adjustment between the selected

temp and the actual one.

Earth Fuse warning is

shown when fuse is

blown. Replace the fuse.

Help Information

Main menu

4 Counters

Program version

Exit

1 Reset settings

Station settings

Tool settings

No tool hours 0

6 Sleep cycles

Tool

210

Back

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

5 Beep ON

6 QST ON

PIN ON

Change PIN

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Metronome ----

Plugged hours 0

Working hours 0

Sleep hours 0

4 Hi

bernation hours 0

Total Counters

Tool settings

Station settings

Selected temp.

350

Power 5%

Fixed temp.

350

Levels ºC

270

350

400

-10

Sleep temp 150

Hibernationdelay 10 min

Temp adjust + O

Tool

210

Back

350

EARTH

FUSE

Station troubleshooting available on the product page at www.jbctools.com

Troubleshooting

Menu Screen

Default PIN: 0105

The work screen provides

useful information of tool

status in real time.

Work Screen

Control Process

Displays a specific fixed temp.

Shown when you have selected

temp. levels. The values must be

adjusted for the task.

“Temp. Adjust” parameter.

It provides a more precise

adjustment between the selected

temp and the actual one.

Earth Fuse warning is

shown when fuse is

blown. Replace the fuse.

Help Information

www.jbctools.com

Station Settings

Minimum Temperature

Set the minimum temperature

to work with.

Min. temp. by default is 200ºC

(392ºF). This is considered to

be a proper starting point for

leaded applications.

Maximum Temperature

Set the maximum

temperature to work with.

Max. temp by default is 400°C

(750°F). This is considered

high enough to work with

most lead-free applications.

Temperature Unit

Celsius (ºC) or Fahrenheit (ºF)

RecommendationsParameter Description

N/a

Warnings

The station temperature

range is 90-450ºC

(190-840ºF). Change the

temperature limits when

working with less common

applications such as low / high

melting point soldering (HMP)

or plastics (e. g. riveting).

In most cases,

working with temperatures

over 400°C (750°F) can

damage the PCB and its

components. Even in short

time periods of tip contact

with the soldering joint, the

flux may not work properly

and could seriously reduce

tip life. If the solder joint

requires more power

(e.g. multilayered or high

dissipation boards), JBC

strongly recommends using

other aids like preheaters.

Be careful when using these parameters as they may reduce the tip life if not used properly.

Please follow the recommended guidelines:

Parameters

Metronome

This activates a beep sound.

Frequencies vary from 1 to 50

seconds.

Change Pin

Change the default security

PIN number (0105).

The PIN must be entered every

time a parameter is changed.

Useful for setting a work rate

in repetitive jobs. The beep

lets you know the length of

time the tip must be in contact

with the soldering joint.

N/a

Enable/disable pin prompt. N/aN/a

QST

Enable/disable QST. N/aN/a

Beep

Enable/disable the beep

sound of the keypad.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc CD-SQF Manual de usuario

Manuales populares de Pistola de soldar de otras marcas