Jbc CTS Manual de usuario

CTS

Solder Pot Stand

INSTRUCTION MANUAL

Solder Pot Stand ................................................................................................................................................1 unit

Handle and Cartridge are not included

Spatula 17mm / 0.67in ........................... 1 unit

Ref. 0018606

Tray ................................................................. 1 unit

Spacers ....................................................... 2 units Allen Key Ø 2mm / 0.08in .................... 1 unit

Spatula 39mm / 1.54in .......................... 1 unit

Ref. 0018607

Manual ........................................................... 1 unit

Ref. 0029403

Packing List

The following items are included:

This manual corresponds to the following reference:

CT-SA

Features

Quick release screw

Screw hole for

mounting on

workbench

Screw hole for

mounting on

workbench

Residue Tray

Protective Screen

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

ScrewHandle

Handle Solder Pot Cartridge

Operation

CTS Solder Pot Cartridge Stand holds the handle T245 or T470 with its Solder Pot Cartridge to

avoid it tipping over accidentally. Find the cartridges availables in www.jbctools.com

As a safety precaution, before placing the handle, make sure the station is off and the tin is cold.

1. Unlock the screw and open the holder. 2. Place the handle with its solder pot

cartridge previously inserted. Be careful to

position it correctly.

3. Once in place, lock the screw and connect

the handle to the stand or directly to JBC

stations or control units using CHB Converter.

- Do not melt “flux core solder”.

- Recommended temperatures for fine wires (up to AWG 24 aprox) and lead free solder

is 300ºC. For thicker wires, increase the temperature as necessary, but always the

minimum possible.

Screw Holder

CHB Converter

Spatulas

Use the spatula to eliminate the dross (Oxide

and other contaminants that form on the

surface of molten solder)

To protect the stand’s rubber feets from wear and tear when fixing CTS in place put the spacers

(Ref. 0014899) between the stand and the workbench.

Use screws (we recommend M4) and assemble them with washers and self-locking nuts to fix the

CTS in place. Check that the stand is stable and leveled.

Fixing CTS to Workbench

Spacer

Self-locking Nut*

Screw*

Washer*

Workbench

*Screws, washers and the self-locking nuts are not included.

Washer*

Spatula

Spatula 17mm / 0.67in

Spatula 39mm / 1.54in

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Maintenance

- Allow to cool the device down before carrying out maintenance or storage.

- Always unplug the handle from the station and remove it from the stand.

Tray

Protective screen

- Use a damp cloth to clean the tray and the protective screen. Alcohol can only be used for

cleaning the metal parts.

- Replace any defective or damaged parts. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Screw hole for

mounting on workbench

- Do not use the appliance for any other purpose than to hold the solder pot. It is not a tool stand.

- Do not use the equipment in environments with risk of fire or explosion.

- Allow to cool down before handling.

- Before inserting the cartridge, turn off the station. If T470 is used, insert the cartridge and tighten

the screw to fix the cartridge inside teh handle.

- Use on a level and stable surface.

- The stand can reach extreme hot temperatures. Protective glasses and gloves are recommended.

- Do not melt “flux core solder”.

- Do not leave the appliance unattended when it is on. Turn off when not in use or not supervised.

- Do not use next to flamable materials. Do not spill liquid into the solder pot.

- Utmost care must be taken with liquid tin waste which can cause severe burns.

- Keep your workplace clean and tidy.

- Be careful with the fumes produced when soldering. The use of fume extractors is recommended.

- This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children must not play with the appliance. Cleaning and user maintenance must

not be carried out by children without supervision.

- Maintenance must not be carried out by children unless supervised.

Safety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

This product should not be thrown in the garbage.

In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must

be collected and returned to an authorized recycling facility.

Warranty

JBC’s 2 year warranty covers this equipment against

all manufacturing defects, including the replacement

of defective parts and labour.

Warranty does not cover product wear or misuse.

In order for the warranty to be valid, equipment must

be returned, postage paid, to the dealer where it was

purchased.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

0029403-270622

CTS

Solder Pot Stand

Ref. CT-SA

- Product Dimensions (aprox.): 92 x 48 mm

(L x W) 3.62 x 1.89 in

- Net Weight: 999 g / 2.20 lb

- Package Dimensions and Weight: 342 x 155 x 120 mm / 1313 g

(L x H x W) 13.46 x 6.10 x 4.72 mm / 2.89 lb

Complies with CE standards.

ESD safe.

Specifications

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc CTS Manual de usuario

Manuales populares de Pistola de soldar de otras marcas