Jbc CDE-BA Series Manual de usuario

Compact Soldering Station

Ref. CDE-BA

INSTRUCTION MANUAL

www.jbctools.com

Packing List

The following items should be included:

Power Cord .................................................... 1 unit

Ref. 0009417 (100V/120V)

0009401 (230V)

Manual ...............................1 unit

Ref. 0020588

CDE Control Unit ..........................................1 unit

Ref. CDE-1BA (120V)

CDE-2BA (230V)

CDE-9BA (100V)

Brass Wool .......................1 unit

Ref. CL6210

Cartridges ................................................... 2 units

Ref. C245903 (x1)

C24 5741 ( x1)

Sponge ............................. 1 unit

Ref. S0354

General Purpose Handle ...................... 1 unit

Ref. T245-A

Compact Soldering Station

Ref. CDE-BA

www.jbctools.com

Earthing fuse

Aux connector

Equipotential connection

USB-B connector

PeripheralsPower Socket

Input Fuse

Main switch

Pedal connector

Features

General Purpose

Handle

Ref. T245-A

Cable collector

Quick Tip Changer

Cartridge storage

Tip Cleaner brass wool

with antisplash membrane

Process Screen

Adjustable Stand:

Intelligent Heat Management

www.jbctools.com

Brass Wool

Ref. CL6210

Very effective

cleaning method.

Leaves a small layer

of solder on the tip

preventing oxidation

between cleaning

and rewetting.

Adjustable stand Cable collector (Ref. CC3702)

Adjust the tool stand to suit

your work position.

Place the cable on the collector so that the working area is free

of cable.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0 017576

It prevents splashing of solder particles

when using the brass wool.

Antisplash Membrane

R ef. 0 017574

Prevents splashing to maintain the work

area clean.

Wiper Ref. CL0160

A temperature resistant receptacle for removing

excess solder by gently tapping or wiping.

If the tip is very dirty,

JBC recommends first

cleaning it with the wiper

to remove excess solder.

Lock

Removing the Splashguard

1. Unlock the splashguard. 2. Remove it.

More cleaning options (not supplied):

Inox Wool

Ref. CL6205

Provides a superior

cleaning of the tip.

Metal Brush

Ref. CL6220

When used carefully,

it provides a more

thorough cleaning.

Sponge

Ref. S0354

Tapping:

Tap gently to remove excess

solder.

Wiping:

Use the slots to remove

remaining particles.

Wiper

Ref. CL0160

The least harmful cleaning

method. Keep the sponge

damp with distilled water when

working to avoid tip wear.

www.jbctools.com

ø 1

ø 1,5

ø 3,5

AAB

Mark

Changing the Grips

Easily replace the Grips for T245-A and T245-C using the slip-on tabs (Ref. 0016057)

1. Inserting tabs 2. Inserting handle 3. Removing tabs

Quick Tip Changer

Put the slide-on tabs into the

new grip.

Push the grip with the tabs

onto the handle.

To remove the tabs, hold the

grip and pull. Use a pliers if

necessary.

Save time and change cartridges safely without switching the station off.

1. Removing 2. Inserting 3. Fixing

Place the handpiece in the

extractor and pull to remove

the cartridge.

Place the handpiece on top

of the new cartridge and

press down slightly.

Use the holes for fixing the

cartridge* as follows:

A. For straight C210.

B. For curved C210.

C. For C245.

tabs

new grip

Round Chisel Round-bent Bevel Special models

Compatible cartridges

The CD-B stations work with

C245 cartridges.

Find the model that best

suits your soldering needs in

www.jbctools.com

*Important

It is essential to insert the

cartridges as far as the mark

for a proper connection.

JBC

Updater

JBC

Manager

software

USB Connector

Download the latest software from our website to improve your soldering station.

JBC Updater

Update the station software via USB connection:

JBC Net

Remotely manage and monitor as many stations as your PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later uses.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from

www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

Cable USB AB

any JBC

station

USB Hub Cable USB

www.jbctools.com

Long time in

the stand

350ºC

Power

45%

T245

17:14

Selected 350ºC

T245

17:14

Sleep

Tool in the stand

Actual Temp. 180ºC

Delay to hibernation: 29:30

T245

17:14

Hibernation

Actual Temp. 25ºC

Operation

The JBC Exclusive Heating System

This revolutionary technology is able to recover tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, tip life increases up to 5.

1. Work 2. Sleep 3. Hibernation

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Tools Menu:

· Set temperature limits

· Select temperature levels

Tools Menu:

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

Tools Menu:

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

350ºC

Power

45%

Temp. Levels

T245

250 350 380

17:14

Tool

in use

Work Screen

Status bar

Displayed if

temperature

levels are

activated

Power

indicator

The CDE offers an intuitive user interface which provides quick access to station parameters.

Original PIN: 0105

Menu Options

Information

Change

port

Station Tools Counters

ResetGraphicsPeripherals

Press INFO for each parameter description. USB flash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)

www.jbctools.com

400

380

360

340

320

100

[ºC] Temp Power [%]

By pressing Graphics in the main MENU, temperature and power ﬁgures in real

time are displayed for each port. This helps you decide which tip to use to obtain

the best quality solder joints.

Process analysis

Graphics

Temperature

Power (%)

Export graphics

Insert a USB flash drive into the USB-A connector

to save your soldering process in csv format.

Change port

Information

Back

Change grid

Exit

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pistola de soldar de jbc

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc CDE-BA Series Manual de usuario

Manuales populares de Pistola de soldar de otras marcas