jbc APS Manual de usuario
APS
Stand for AP250 Solder Feed Iron
INSTRUCTION MANUAL
Manual ............................. 1 unit
Ref. 0027181
Stand for AP250 Solder Feed Iron .................................................................................................. 1 unit
The following items are included:
This manual corresponds to the following reference:
AP-SF
Packing List
Stand Cable 1m ............ 1 unit
Ref. 0024227
Sponge for Modular
Tool Stands ................... 1 unit
Ref. S7034
Brass Wool .................... 1 unit
Ref. CL6210
2
Features and Connections
To Tool
To Control Unit
Wiper for
Modular Tool Stand
Ref. CL7899
Adjustable
Cable Collector
Ref. CC1001
Ajustable Tool Holder
Brass Wool
(inside)
Sponge
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
APS (AP250)
APS (AP250)
APS (AP250)
Assembly
Adjust the tool holder angle to
suit the work position.
Insert the cable into the clip
and then insert into the cable
collector. Do not leave the
cable longer than necessary
to reach the work area freely.
The cable collector is flexible.
It accompanies and adapts
to the movements during the
soldering process.
The wiper offers different ways to
clean the cartridge tips. If desired
use the included sponge.
Cable Collector and Adjustable Tool Holder
4
Tap gently to remove excess
solder.
Use the slots to remove the
remaining particles.
Wiper
Tapping Wiping Sponge
The softest cleaning method.
Keep the sponge damp with
distilled water when working to
avoid tip wear.
The integrated wiper offers different ways to clean the cartridge tips.
Wiper and Brass Wool Replacement
Lift the wiper at its front edge.
The wiper and brass wool can easily be removed for cleaning or replacement when they are worn.
Remove the wiper by pulling
it out.
Replace the brass wool with
a new one when it is worn
out.
Place the wiper back o replace
them if desired.
5
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Accessories
Stand extension cable
Ref. A1286
Length: 1.5m
Stand Cable
Maintenance
Before carrying out maintenance or storage,
always unplug the stand from the station and
the tool.
- Use a damp cloth to clean the stand.
Alcohol can be used only when cleaning
the metal parts.
- Check periodically that the metal parts of
the tool/stand are clean so that the station
can check the tool’s status.
- Periodically check all cables and tube
connections.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a
JBC authorized technical service.
Clean periodically
6
Safety
- Do not use the stand for any other purpose than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0 0 27 18 1-12 2 1
APS
Stand for AP250 Solder Feed Iron
Ref.: AP-SF
- Includes Sleep Mode
- Total Net Weight 1462 g / 3.22 lb
- Package Dimensions / Weight 342 x 155 x 120 mm / 2022 g
(L x W x H) 13.46 x 6.10 x 4.72 in / 4.46 lb
Complies with CE standards
ESD safe
Specifications
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Pistola de soldar de jbc
jbc
jbc B-iRON 115 Manual de usuario
jbc
jbc CD-2BHE Manual de usuario
jbc
jbc CF-2B Manual de usuario
jbc
jbc RWB-A Manual de usuario
jbc
jbc CD-SE Manual de usuario
jbc
jbc ATS Manual de usuario
jbc
jbc PHSK-B Manual de usuario
jbc
jbc AM 6000 Manual de usuario
jbc
jbc CDN-9QF Manual de usuario
jbc
jbc Advanced Series Manual de usuario
jbc
jbc AD 4200 Manual de usuario
jbc
jbc ALE Series Manual de usuario
jbc
jbc CDE-BA Series Manual de usuario
jbc
jbc CD-Be Manual de usuario
jbc
jbc CD-2BHE Manual de usuario
jbc
jbc CDE-SQA Series Manual de usuario
jbc
jbc B-IRON 500 Manual de usuario
jbc
jbc CA-1E Manual de usuario
jbc
jbc SF-110VB Manual de usuario
jbc
jbc B-iRON 115 Manual de usuario
Manuales populares de Pistola de soldar de otras marcas
Vishay Precision Group
Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje
ersa
ersa i-CON 1V Manual de usuario
Hakko Electronics
Hakko Electronics FX-100 Manual de usuario
Weller
Weller WAD 101 Manual de usuario
Weller
Weller WXD 2 Manual de usuario
AlienTek
AlienTek T100 Manual de usuario
