Jbc TE Series Manual de usuario

PRECISION

HOT AIR STATION

www.jbctools.com

JT / PRECISON HOT-AIR

CONTROL UNIT TE-SA

STAND

TE-TB

(100V / 120V / 230V)

HEATING SET

0008752

EXTRACTOR STAND *

TN9209 ø3

TN9208 ø4

TN9080 ø5

NOZZLE

0930110

SUCTION CUPS *

0932330

SUCTION TUBE *

T2050 ø20

T2250 ø40

TRIPOD*

POWER CORD

* These accessories not supplied with TE-2QB / TE-1QB / TE-9QB stations

Protector

P2220 (32)

P2230 (48)

P2235 (24)

P4000 (44)

P4010 (60)

Extractor

E2184

E2064

E2052

PRECISION

HOT AIR STATION

www.j bctools.co m

INSTALLATION

Power cord

socket

Equipotencial

connection

Pedal 0964551

(NOT INCLUDED)

(ON / OFF hot air)

DESCRIPTION

Display

USB connector to PC:

- Update station software

- Create graphs of the soldering process

- Manage and monitor parameters via PC

Function keys

Connectable tools:

JT-T2A / JT-T1A

TE-TB

Heating element

Hot Air switch

(ON / OFF)

Suction

Tube

Main switch

Heater inlet

Vacuum inlet for tripods

and extractors

Activation of

suction pump

CONTROL SCREEN / MANUAL MODE

CONTROL SCREEN / PROFILE MODE

Decrease & move down

Decrease proﬁle number

Increase & move up

Increase proﬁle number

Access Menu

Conﬁrm Selection

Access Menu

(pess key 2 secondes)

Temp

Air %

Time to stop 45 seconds

Profile 8

Power 70%

400

380

Selected temperature

Current temperature

% Instant power supplied to heater

Selected proﬁle

Current temperature

Selected ﬂow

Graph of selected proﬁle

Remaining time

400ºC Select

Air 100%

Time 125s.

You can switch between operating modes (Manual Mode / Proﬁles Mode) by pressing the “increase” and

“decrease” keys simultaneously for 2 seconds. (Only if mode proﬁles is ON)

PRESS Key 2 seconds

to access Menu

Select

Profile

Step 4

Time 20

Temp 450

Air 100

Edit Profile

Edit Profile 8

ORIGINAL PIN: 0105

Main menu

Settings

Counters

1 Reset settings

2 Station

Settings

Profile Settings

Counters

5 Program version

Temp unit Celsius

2 Maximum

temp 450

3 Minimum temp T OFF

4 Fix temp 400

5 Max air 100%

6 Min air 10%

7 Fix air 40%

8 Time to stop 120 sec

9 Beep ON

10 Pop up ON

11 Change PIN

1 Station ON hours

Works hours 0

3 Works

cycles 0

Exit

Back

Exit

SETTINGS

* Selecting Tmin to “T OFF” allows

for blowing at ambient temperature.

Profile settings

1 Profiles

2 Edit Profile

Copy profile

Exit

DESOLDERING PROCEDURE

1. Position suction cup. 2. Hot-air melts solder. 3. IC pops up automatically.

EDIT PROFILE

This option allows you to edit or create a proﬁle.

First , you must select the proﬁle to edit and then modify the points that make up the proﬁle.

Each proﬁle is composed of 9 points, each point is formed by three parameters:

1. Time (seconds)

2. Temperature (°C / °F)

3. Flow rate (%)

You can delete the last point of the proﬁle by selecting “-----” in the time parameter.

It should be taken into account that the regulation range permitted by the station is between 150°C and

450°C, whereby it is not possible to create temperature ramps between room temperature (Toff) and

150°C.

The station can store up to 25 temperature proﬁles.

The ﬁrst three proﬁles are edited as an example.

COPY PROFILE

This option allows you to copy a proﬁle.

You must select the proﬁle source and the destination proﬁle where it will be copied.

DELETE PROFILE

This option will allow you to delete a proﬁle previously selected.

MAINTENANCE

CHANGING THE HEATING SET

1. Ensure that the tool is off.

2. Use a wrench to unscrew the connector seal.

REPLACING THE HEATING ELEMENT

Follow this process inverted to re-connect the heating element.

Only perform this operation when the tool is stopped and the heating element set is cold.

1. Untighten screw.

2. Separate the heating element from the heating set’s handle.

3. Connect new heating element, pushing it’s extreme.

4. Insert screw to aviod air-loss witch could reduce the heating element’s lifetime.

3. Pull back the seal.

4. Pull connector from socket to disconnect heating set.

5. Follow steps in reverse to connect the heating set.

0012374

(230V -100V -120V)

Heating element

0012697

Handle

TE-TB

(100V-120V -230V)

Heating set

WARRANTY

JBC’s 2 years warranty guarantees this equipment against all manu-

facturing defects, covering the replacement of defective parts and

all necessary labour.

Warranty does not cover product wear due to use or mis-use.

In order for the warranty to be valid, equipment must be returned,

postage paid, to the dealer where it was purchased enclosing this

fully ﬁlled in, sheet.

www.jbctools.com

SERIAL Nº

STAMP OF DEALER

DATE OF PURCHASE

0012881-0313

TECHNICAL SPECIFICATIONS

- Temperature selection from room temperature to 450°C (850ºF) and cool mode (can be used to blow air at room

temperature).

- Ambient Operating Temperature: 10 to 40ºC (50-104ºF)

- Output Peak Power: 300W.

- Air ﬂow regulation: 5-20 l/min.

- Vacuum: 30% / 228 mmHg / 9 inHg

- TE-2B 230V 50/60Hz. Input fuse 4A.

- TE-1B 120V 50/60Hz. Input fuse 8A.

- TE-9B 100V 50/60Hz. Input fuse 8A.

- Total weight of unit: 2.3Kg (5.1lb)

- Complies with CE standards on electrical safety, electromagnetic compatibility

and ESD protected housing “skin effect”.

- RoHS compliant.

- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.

This product should not be

thrown in the garbage.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc TE Series Manual de usuario

Manuales populares de Pistola de soldar de otras marcas