Interlogix TruVision 11/31 Series Manual de usuario
TruVision
11/31
Series
IP Camera
FW5.2 Installation
Guide
P/N 1073126-EN • REV A • ISS 07JAN16
Copyright © 2016 United Technologies Corporation,
Interlogix is part of UTC Climate, Controls & Security, a
unit of United Technologies Corporation. All rights
reserved.
Trademarks and
patents
Trade names used in this document may be trademarks
or registered trademarks of the manufacturers or
vendors of the respective products.
Manufacturer Interogix
2955 Red Hill Avenue, Costa Mesa, CA 92626-5923,
USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
FCC compliance Class A: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
ACMA compliance Notice! This is a Class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
adequate measures.
Canada This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à
la norme NMB-0330 du Canada.
European Union
directives
12004/108/EC (EMC directive): Hereby, UTC Fire &
Security declares that this device is in compliance with
the essential requirements and other relevant
provisions of Directive 2004/108/EC.
2002/96/EC (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon
the purchase of equivalent new equipment, or dispose
of it at designated collection points. For more
information see: www.recyclethis.info.
Contact information For contact information, see www.interlogix.com or
www.utcfssecurityproducts.eu.
Installation Guide 1
Content
Introduction 2
Product overview 2
Installation 4
Installation environment 4
Package contents 5
Cable requirements 13
Camera description 14
Setting up the camera 19
Accessing the SD card 20
Mounting the IP mini bullet camera 20
Mounting the IP VF bullet camera 22
Mounting the IP VF dome camera 27
Mounting the IP mini dome camera 31
Mounting the IP wedge dome camera 34
Using the camera with a recorder 36
Using the camera with TruVision Navigator 37
Specifications 37
TruVision IP mini bullet cameras 37
TruVision IP VF bullet cameras 37
TruVision IP mini dome 38
TruVision IP VF mini dome cameras 39
TruVision IP wedge cameras 40
Pin definitions 41
2 Installation Guide
Introduction
Product overview
This is the installation guide for TruVision 11/31 Series IP
camera models:
IP mini bullet camera:
TVB-1101 (1.3MPX Bullet, 6 mm lens, PAL)
TVB-3101 (1.3MPX Bullet, 6 mm lens, NTSC)
TVB-1102 (3MPX Bullet, 6 mm lens, PAL)
TVB-3102 (3MPX Bullet, 6 mm lens, NTSC)
TVB-1103 (1.3MPX Bullet, 4 mm lens, PAL)
TVB-3103 (1.3MPX Bullet, 4 mm lens, NTSC)
IP VF bullet camera:
TVB-1104 (1.3MPXBullet, 2.8 to 12 mm VF Lens, PAL)
TVB-3104 (1.3MPXBullet, 2.8 to 12 mm VF Lens, NTSC)
TVB-1105 (3MPXBullet, 2.8 to 12 mm VF Lens, PAL)
TVB-3105 (3MPXBullet, 2.8 to 12 mm VF Lens, NTSC)
IP mini dome camera:
TVD-1101 (1.3MPX Plastic Mini Dome, PoE, PAL)
TVD-3101 (1.3MPX Plastic Mini Dome, PoE, NTSC)
TVD-1102 (3MPX Plastic Mini Dome, PoE, PAL)
TVD-3102 (3MPX Plastic Mini Dome, PoE, NTSC)
Installation Guide 3
TVD-1105 (1.3MPX IP IR Outdoor Mini Dome,
PoE/12 VDC, PAL)
TVD-3105 (1.3MPX IP IR Outdoor Mini Dome,
PoE/12 VDC, NTSC)
TVD-1106 (3MPX IP IR Outdoor Mini Dome,
PoE/12 VDC, PAL)
TVD-3106 (3MPX IP IR Outdoor Mini Dome,
PoE/12 VDC, NTSC)
IP VF mini dome camera:
TVD-1103 (1.3MPX VF Mini Dome, PAL)
TVD-3103 (1.3MPX VF Mini Dome, NTSC)
TVD-1104 (3MPX VF Mini Dome, PAL)
TVD-3104 (3MPX VF Mini Dome, NTSC)
IP wedge camera:
TVW-1101 (1.3MPX Wedge, 2.8 mm lens, Grey, PAL)
TVW-3101 (1.3MPX Wedge, 2.8 mm lens, Grey, NTSC)
TVW-1102 (3MPX Wedge, 2.8 mm lens, Grey, PAL)
TVW-3102 (3MPX Wedge, 2.8 mm lens, Grey, NTSC)
TVW-1117 (1.3MPX Wedge, 2 mm lens, Grey, PAL)
TVW-3117 (1.3MPX Wedge, 2 mm lens, Grey, NTSC)
TVW-1118 (1.3MPX Wedge, 2.8 mm lens, White, PAL)
TVW-3118 (1.3MPX Wedge, 2.8 mm lens, White, NTSC)
TVW-1119 (1.3MPX Wedge, 2.8 mm lens, Black, PAL)
TVW-3119 (1.3MPX Wedge, 2.8 mm lens, Black, NTSC)
4 Installation Guide
Installation
This section provides information on how to install the
cameras.
Installation environment
When installing your product, consider these factors:
•Electrical: Install electrical wiring carefully. It should be
done by qualified service personnel. Always use a proper
PoE switch or a 12 VDC UL listed Class 2 or CE certified
power supply to power the camera. Do not overload the
power cord or adapter.
•Ventilation: Ensure that the location planned for the
installation of the camera is well ventilated.
•Temperature: Do not operate the camera beyond the
specified temperature, humidity or power source ratings.
The operating temperature of the camera is between -30
to +60°C (-22 to 140°F). Humidity is below 90%.
•Moisture: Do not expose the camera to rain or moisture,
or try to operate it in wet areas. Turn the power off
immediately if the camera is wet and ask a qualified
service person for servicing. Moisture can damage the
camera and also create the danger of electric shock.
•Servicing: Do not attempt to service this camera
yourself. Any attempt to dismantle or remove the covers
from this product will invalidate the warranty and may
also result in serious injury. Refer all servicing to qualified
service personnel.
Installation Guide 5
•Cleaning: Do not touch the sensor modules with fingers.
If cleaning is necessary, use a clean cloth with some
ethanol and wipe the camera gently. If the camera will not
be used for an extended period of time, put on the lens
cap to protect the sensors from dirt.
Package contents
Check the package and contents for visible damage. If any
components are damaged or missing, do not attempt to use
the unit; contact the supplier immediately. If the unit is
returned, it must be shipped back in its original packaging.
IP mini bullet camera
Camera
Installation manual
CD with Configuration
manual and TruVision
Device Finder
6 Installation Guide
Template
Screws
Drywall anchor
Ø7.5 × 24.5 mm (3 pcs)
Screw M4
(4 × 25 mm (3 pcs)
Water joint: provides water
resistance to network
connection.
12 VDC connector: DC
jack socket to
terminal connectors
with positive and
negative indicators.
Tabla de contenidos
Otros manuales de Cámara IP de Interlogix
Interlogix
Interlogix TVD-TIR6-MR Manual de usuario
Interlogix
Interlogix TVC-5125BE-3 Manual de usuario
Interlogix
Interlogix TruVision Line Hoja de instrucciones
Interlogix
Interlogix TruVision TVB2406 Manual de usuario
Interlogix
Interlogix TruVision Line Manual de usuario
Interlogix
Interlogix UltraSync RS-3230 Manual de usuario
Interlogix
Interlogix TruVision Line Manual de usuario
Interlogix
Interlogix TruVision 6 Series Manual de usuario
Interlogix
Interlogix TruVision 12 Series Manual de usuario
Interlogix
Interlogix TruVision Series TVQ-8101 Manual de usuario
Interlogix
Interlogix UltraSync RS-3230 Hoja de instrucciones
Interlogix
Interlogix TruVision Open Standards Cómo utilizar
Interlogix
Interlogix TruVision TVC-1201 Hoja de instrucciones
Interlogix
Interlogix TruVision TVT-2201 Manual de usuario
Interlogix
Interlogix 1073033-EN Manual de usuario
Interlogix
Interlogix VD-IP-XP4DNP Manual de usuario
Interlogix
Interlogix UltraView IP XP4 Box Day/Night Range Camera Manual de usuario
Interlogix
Interlogix TVB-2203 Manual de usuario
Interlogix
Interlogix UVD-IP-XP4DNR-VA2 Manual de usuario
Interlogix
Interlogix TVB-1101 Manual de usuario
