HP Spooler FASTP Manual de usuario

Spooler FASTP

Network Print

Processes Manual

Abstract

This manual describes the Spooler FASTP network print processes: FASTPTCP,

FASTPSMB, FASTPNOV, FASTPX25, and FASTPXNS. The FASTP network print

processes allow you to use the Spooler to print documents on printers attached to HP

NonStop™ systems through TCP/IP LANs, SMB LANs, Netware LANs, X.25 WANs,

and XNS LANs.

Product Version

N/A

Supported Releases Version Updates (RVUs)

This manual supports D42.00 and all subsequent D-series release version updates

(RVUs), all G06 RVUs, and all H06 RVUs until otherwise indicated in a new edition.

Part Number Published

427528-006 February 2013

Document History

Part Number Product Version Published

422025-001 N/A May 2000

427528-001 N/A November 2000

427528-002 N/A May 2002

427528-003 N/A December 2002

427528-004 N/A September 2005

427528-006 N/A February 2013

Legal Notices

Confidential computer software. Valid license from HP required for possession, use or copying.

Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under

vendor's standard commercial license.

The information contained herein is subject to change without notice. The only warranties for HP

products and services are set forth in the express warranty statements accompanying such products

and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be

liable for technical or editorial errors or omissions contained herein.

Export of the information contained in this publication may require authorization from the U.S.

Department of Commerce.

Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation.

Intel, Itanium, Pentium, and Celeron are trademarks or registered trademarks of Intel Corporation or its

subsidiaries in the United States and other countries.

Java® is a registered trademark of Oracle and/or its affiliates.

Motif, OSF/1, UNIX, X/Open, and the "X" device are registered trademarks and IT DialTone and The

Open Group are trademarks of The Open Group in the U.S. and other countries.

Open Software Foundation, OSF, the OSF logo, OSF/1, OSF/Motif, and Motif are trademarks of the

Open Software Foundation, Inc.

OSF MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE OSF MATERIAL PROVIDED

HEREIN, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

OSF shall not be liable for errors contained herein or for incidental consequential damages in

connection with the furnishing, performance, or use of this material.

which it relates are derived in part from materials supplied by the following:

This software and documentation are based in part on the Fourth Berkeley Software Distribution

under license from The Regents of the University of California. OSF acknowledges the following

individuals and institutions for their role in its development: Kenneth C.R.C. Arnold,

1981, 1982, 1983, 1985, 1986, 1987, 1988, 1989 Regents of the University of California.

Printed in the US

Hewlett-Packard Company—427528-006

Spooler FASTP Network Print

Processes Manual

Index Examples Figures Tables

Legal Notices

What’s New in This Manual ix

Manual Information ix

New and Changed Information ix

About This Manual xi

Related Manuals xii

Notation Conventions xii

1. Overview of Spooler FASTP Network Print Processes

FASTP Network Print Process Environment 1-2

Spooler Environment 1-4

IOP Environment 1-4

Control Operations and Job Information 1-4

Trace Facility 1-5

EMS Event and 512 Messages 1-5

2. Installing and Configuring FASTP Network Print Processes

Installing a FASTP Network Print Process 2-2

Configuring a FASTP Network Print Process 2-4

Configuring a FASTP Network Print Process in the Spooler Subsystem 2-5

Configuring a FASTCNFG File 2-17

Setting Control and Job Information 2-27

Using the CONTROL, CONTROLBUF, and SETMODE Operations 2-27

Using the Spoolcom JOB Command to Manage Jobs 2-38

Using the Spoolcom BATCH Command to Manage Batch Jobs 2-39

Initialization Job Limitation 2-41

Error-Handling Considerations 2-41

3. Installation and Configuration Considerations for FASTPTCP

Installation Requirements 3-3

AWAN Servers and Other Terminal Servers and TCP/IP Direct and TCP/IP-TELNET

Configuration Considerations 3-4

Contents

Spooler FASTP Network Print Processes Manual—427528-006

4. Installation, Configuration, and Usage

Considerations for FASTPSMB

Printer Installation and Configuration Considerations 3-5

TELNET Terminal Servers and End of Print Job Considerations 3-5

TELNET Terminal Servers and Supported TTAP Printers 3-6

FASTPTCP Installation and Configuration Considerations 3-7

Installation and Configuration Tasks for FASTPTCP 3-9

Spooler Configuration Considerations for FASTPTCP 3-10

Device Attributes 3-11

FASTCNFG DEVICE, HOSTS, and POLLTYPE Configuration for FASTPTCP 3-13

Using the HOSTS Keyword Entry 3-14

FASTCNFG DEVICE Attributes for All FASTPTCP Devices 3-15

FASTCNFG DEVICE Attributes for TCP/IP Direct Connections to Dumb Serial

Printers 3-20

FASTCNFG DEVICE Attributes for Dumb Serial Printers Connected Through

AWAN Servers or Other TELNET Terminal Servers 3-21

FASTCNFG DEVICE Attributes for Supported TTAP Printers Connected Through

AWAN Servers or Other TELNET Terminal Servers 3-23

FASTCNFG DEVICE Attributes for HP JetDirect Printers 3-26

FASTCNFG POLLTYPE Keyword for HP JetDirect Printers 3-28

FASTCNFG DEVICE Attributes for Lexmark Printers 3-32

FASTCNFG DEVICE Attributes for Printers Connected Through Microplex

Servers 3-34

FASTCNFG DEVICE Attributes for Devices Connected to Line Printer Daemons

(LPDs) 3-35

Creating a FASTKCON Configuration File (Beginning with the G06 and D48

RVUs) 3-40

Creating the Master FASTCNFG File(s) for FASTKCON 3-41

Running the FASTKCUT Utility Program 3-45

Converting Your FASTCNFG Files to a FASTKCON File 3-49

FASTKCON Configuration File Format 3-50

FASTKCON File Alteration 3-52

Reverting a FASTKCON File Back to a FASTCNFG File 3-52

FASTKCUT Messages 3-52

Spooler FONT Job Considerations for LPD Connections 3-53

CONTROLBUF Operations 3-53

SETMODE 260 3-55

Sample Spooler Font Script File for an LPD Device 3-56

4. Installation, Configuration, and Usage Considerations for

FASTPSMB

Installation Requirements 4-2

Contents

Spooler FASTP Network Print Processes Manual—427528-006

iii

5. Installation, Configuration, and Usage

Considerations for FASTPNOV

Installation and Configuration Tasks for FASTPSMB 4-3

Spooler Configuration Considerations for FASTPSMB 4-4

Device Subtype 4-4

Device Attributes 4-5

FASTCNFG DEVICE Configuration for FASTPSMB 4-5

Optional DEVICE Attributes for FASTPSMB 4-9

Sample FASTCNFG File for FASTPSMB 4-15

User-Mode Access Considerations for FASTPSMB 4-15

Where to Find Information About NetBIOS and SMB Error Messages 4-15

5. Installation, Configuration, and Usage Considerations for

FASTPNOV

Installation Requirements 5-2

Installation and Configuration Tasks for FASTPNOV 5-3

Spooler Configuration Considerations for FASTPNOV 5-4

Device Names 5-4

Device Attributes 5-5

FASTCNFG DEVICE Configuration for FASTPNOV 5-6

Optional Device Attributes for FASTPNOV 5-8

Sample FASTCNFG File for FASTPNOV 5-9

Spoolcom JOB Subcommand Considerations for FASTPNOV 5-10

Spoolcom BATCH Subcommand Considerations for FASTPNOV 5-11

Session Considerations 5-12

Effect on Error Recovery 5-12

Effect on User ID and Password 5-12

NetWare LAN Considerations 5-13

User ID and Password 5-13

Job Identification 5-13

Control of NetWare Print Jobs 5-14

Unsupported NetWare Print Job Attributes 5-15

Where to Find Information About NetWare Error Messages 5-15

6. Installation and Configuration Considerations for FASTPX25

Installation Requirements 6-2

Printer Installation and X25AM Configuration Considerations 6-3

PAD Considerations 6-3

X25AM Line Configuration Considerations 6-3

X25AM Subdevice Configuration Considerations 6-4

X.25 NUA and SVC Considerations 6-6

Contents

Spooler FASTP Network Print Processes Manual—427528-006

7. Installation, Configuration, and Usage

Considerations for FASTPXNS

SVC Sharing Considerations 6-7

Installation and Configuration Task Overview for FASTPX25 6-8

Spooler Configuration Considerations for FASTPX25 6-9

Device Names 6-9

Device Attributes 6-10

FASTCNFG DEVICE and MACRO Configuration for FASTPX25 6-12

Optional DEVICE Attributes for FASTPX25 6-13

Using MACRO Entries 6-16

Sample FASTCNFG File for FASTPX25 6-17

7. Installation, Configuration, and Usage Considerations for

FASTPXNS

Installation Requirements 7-2

Xerox Printer Installation and Configuration Considerations 7-3

LAN Considerations 7-3

Ethernet Port Configuration Considerations 7-3

Required Printer Software 7-4

Installation and Configuration Tasks for FASTPXNS 7-7

Spooler Configuration Considerations for FASTPXNS 7-8

Device Names 7-8

Spooler Device Attributes 7-9

FASTCNFG DEVICE Configuration For FASTPXNS 7-11

Optional Device Attributes for FASTPXNS 7-13

Sample FASTCNFG File for FASTPXNS 7-15

Installation and Configuration Troubleshooting 7-15

No Response to FASTPXNS Ethernet Requests 7-15

Post-Connection Problems 7-16

Xerox Status Reporting Considerations 7-17

Xerox Start Print Command Considerations 7-19

Spooler FONT Job Considerations for Xerox Printers 7-20

CONTROL, CONTROLBUF, and SETMODE Considerations for Xerox Printers 7-21

CONTROLBUF Operations 7-21

Where to Find Information About XNS Error Messages 7-24

8. Troubleshooting and Using the Trace Facility

Troubleshooting and Reporting Problems 8-1

Using the Trace Facility 8-3

Creating Trace Files 8-4

Configuring the Shadow Trace File Names in the FASTCNFG File 8-5

Contents

Spooler FASTP Network Print Processes Manual—427528-006

A. Bit Translation and Character Substitution

Enabling Tracing 8-6

Extending Shadow Trace Files 8-6

Reading Trace Output 8-7

A. Bit Translation and Character Substitution

Bit Translation A-1

Character Substitution A-2

B. EMS Messages

FASTPTCP Event Messages B-2

FASTP EMS 512 Text Messages B-58

Index

Examples

Example 2-1. Sample Spoolcom Command File 2-17

Example 2-2. Sample FASTCNFG File 2-18

Example 2-3. Sample Font Utility Script File Using CONTROLBUF 101 2-28

Example 2-4. Sample Font Utility Script File Using CONTROLBUF 103 2-29

Example 2-5. Sample Font Utility Script File Using CONTROLBUF 113 2-31

Example 2-6. Sample Font Utility Script File Using CONTROLBUF 130 2-35

Example 3-1. Sample FASTCNFG File for a Serial Printer Connected Through an

AWAN Server 3-23

Example 3-2. Sample FASTCFG File for a TTAP Printer Connected Through a

TELNET Terminal Server 3-25

Example 3-3. Sample FASTCFG File for an HP JetDirect Printer 3-31

Example 3-4. Sample FASTCFG File for Printer Connected Through a Microplex

Server 3-35

Example 3-5. Sample FASTCNFG File for an LPD Connection 3-40

Example 3-6. FASTCNFG File Using Only DEVICE Entries 3-42

Example 3-7. FASTCNFG File Using DEFAULT and DEVICE Entries 3-42

Example 3-8. FASTCNFG File Using Only DEVICE Entries 3-43

Example 3-9. FASTCNFG File Using DEFAULT and DEVICE Commands 3-44

Example 3-10. Sample Spooler Font Script File for an LPD Device 3-56

Example 4-1. Example of Spooler Job Attributes 4-12

Example 4-2. Sample FASTCNFG File for FASTPSMB 4-15

Example 5-1. Sample FASTCNFG File for FASTPNOV 5-9

Example 6-1. Sample FASTCNFG File for FASTPX25 6-17

Example 7-1. Sample HIP.LIB file for a Xerox Printer 7-4

Example 7-2. Sample TENET.JSL File Used by HIP.LIB File 7-6

Example 7-3. Sample FASTCNFG File for FASTPXNS 7-15

Contents

Spooler FASTP Network Print Processes Manual—427528-006

Figures

Example 7-4. Sample Font Script File Containing DJDE Sequences 7-20

Example 7-5. Sample FASTPXNS Font Script File Using CONTROLBUF 112 7-23

Figures

Figure 1-1. FASTP Network Print Process Components 1-2

Figure 2-1. Using a Level-1, a Level-2, and a Level-3 FASTCNFG File 2-26

Figure 4-1. Path Name for a LAN Print Queue 4-8

Tables

Table 2-1. Object Files for FASTP Network Print Process Products 2-3

Table 2-2. Spoolcom Commands Used to Configure a FASTP Network Print

Process 2-5

Table 2-3. Spooler Device Attributes and Their Effect on FASTP Network

Printers 2-7

Table 2-4. Supported DEV PARM Attribute Bit Values for FASTP Network Print

Processes 2-11

Table 2-5. Bit Values for PARM Attribute 2-13

Table 2-6. FASTCNFG File-Formatting Rules Summary 2-21

Table 2-7. Keyword Syntax Elements for All FASTCNFG Files 2-23

Table 2-8. Supported Control 1 Parameters 2-27

Table 2-9. Supported CONTROLBUF 130 Item Field Values for FASTP Network

Print Processes 2-32

Table 2-10. Supported SETMODE Functions and Parameters for FASTP Network

Print Processes 2-36

Table 2-11. Spoolcom JOB Subcommands and Their Effect on FASTP Network Print

Processes 2-38

Table 2-12. Spoolcom BATCH Subcommands and Their Effect on FASTP Network

Printers 2-40

Table 3-1. Supported PRINT PARM Attribute Bit Values for FASTPTCP Processes

(Beginning with the G06.10 and D48.02 RVUs) 3-11

Table 3-2. Spooler Device Attributes With Special Effects on FASTPTCP

Printers 3-12

Table 3-3. Supported CONTROLBUF Operations for LPD Devices 3-53

Table 3-4. Supported SETMODE 260 Param1 Values for LPD Devices 3-55

Table 4-1. FASTPSMB Device Type and Subtype Information 4-4

Table 4-2. Spooler Device Attributes With Special Effects on SMB Print

Queues 4-5

Table 4-3. Examples of Subdevice Names Used as RESOURCE Names 4-8

Table 4-4. HP Device Types and Default Data-Block Sizes 4-10

Table 4-5. Examples of Originator Text 4-12

Table 4-6. Valid and Invalid Null Password Specifications 4-13

Tabla de contenidos

Otros manuales de Software de HP

HP iPAQ 4500 Guía de instalación

HP INSIGHT DYNAMICS T8671-91017 Manual de usuario

HP Data Protector Manual de usuario

HP BladeSystem bc2000 - Blade PC Manual de servicio

HP Xw460c - ProLiant - Blade Workstation Manual de usuario

HP D6030A - NetServer - E50 Manual de usuario

HP Xw460c - ProLiant - Blade Workstation Manual de usuario

HP HPE XP P9500 Manual de usuario

HP SN3000B Manual de servicio

HP D7171A - NetServer - LPr Manual de usuario

HP Data Protector A.06.11 Manual de usuario

HP Pavilion w1000 - Desktop PC Manual de funcionamiento

HP Vectra VL800 Manual de usuario

HP ML110 - ProLiant G5 2TB Storage Server NAS Manual de usuario

HP B2355-92068 Manual de instrucciones

HP Workstation zx6000 Cómo utilizar

HP eld Manual de usuario

HP 2230s - Compaq Business Notebook Manual de instrucciones

HP dc5700 - Microtower PC Manual de usuario

HP VL400 - Vectra - 64 MB RAM Manual de servicio

HP LASERJET ENTERPRISE 500 Manual de servicio

HP Neoware e140 - Thin Client Manual de usuario

HP StorageWorks 16-EL - SAN Switch Manual de usuario

HP KAYAK XM600 Manual de instrucciones

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Novell

Novell SP2 - S Manual de instrucciones