HIK VISION DS-2CD7153-E Manual de usuario
Network Mini Dome Camera
Installation Manual
V3.0.0
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com
Thank you for purchasing our product. If there are any questions, or requests, please
do not hesitate to contact the dealer.
This manual applies to DS-2CD7153-E and DS-2CD7133-E Network Camera.
This manual may contain several technical incorrect places or printing errors, and the
content is subject to change without notice. The updates will be added to the new
version of this manual. We will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of
the security or signaling aspects of this product. UL has only tested for fire, shock or
casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the security or signaling
aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF
ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety regulations of the
nation and region.
2. Source with DC 12V according to the IEC60950-1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.If use the POE as the power supply, please make sure that
the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
5. The sensor may be burned out by a laser beam, so when any laser equipment is being used,
make sure that the surface of the sensor will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating temperature
should be between -10°C ~ 60°C , dusty or damp locations, and do not expose it to high
electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating environment.
8. While shipping, the camera should be packed in its original packing, or packing of the same
texture.
9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be
replaced regularly according to their average life time. The average time varies because of
differences between operating environment and usage history, so regular checking is
recommended for all users. Please contact with your dealer for more details.
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
3
Table of Contents
Chapter 1 Introduction.................................................................................................1
1.1 Network camera Functions and Features .........................................................1
1.2 Applications......................................................................................................1
Chapter 2 Installation...................................................................................................2
2.1 Camera Description..........................................................................................2
2.1.1 Camera Physical Description....................................................................3
2.1.2 Camera Connection .................................................................................4
2.2 Hardware Installation .......................................................................................5
Appendix Product Specification ...................................................................................8
DS-2CD7133-E........................................................................................................8
Specification...................................................................................................10
Dimensions ....................................................................................................11
DS-2CD7153-E........................................................................................................8
Specification.....................................................................................................8
Dimensions ......................................................................................................9
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and network DVS (Digital Video Server). Due to the embedded
Linux operation system and the latest Davinci hardware platform of TI, the system operates with
high scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the
product small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Network Function: Support the TCP/IP protocols and IE browsing.
Heartbeat Function: The server can acquire real time operating performance of the network
camera through the heartbeat function.
Alarm Function: Supports Motion Detection.
User Management: Support multilevel right management. The administrator can create up to
15 separate users with different right levels, which highly improves the system security.
Compression Functions:
Support 1 channel video signal and standard H.264 video encoding compression, which
supports both variable bit rate and variable frame rate; besides, you can self-define both the
video quality and its compressed bit rate.
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for supermarkets and factories.
2. Remote surveillance for homes and offices.
3. Indoor monitoring scenes, such as hotel, corridor, stairway.
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2
Chapter 2 Installation
NOTE:
1. Please check if all the items on the package list have been included with your camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. If the product does not operate properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. Users are responsible for any
problem caused by modification or repairing without authorization.
2.1 Camera Description
NOTE: The camera supports PoE power supply.
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
3
2.1.1 Camera Physical Description
Serial NO.
Description
1
Back box
2
Lens
3
P: Power LED indicator, which turns red when power is applied to the unit.
4
Bottom board
5
Bottom board set screw hole
6
Lens set screw
7
S & L: Network status LED indicator.
When the network is connected, the “S”LED turns orange, while the “L”LED flickers in green.
8
RESET: Reset all paramaters to factory default settings.
NOTE:
When the camera is power up, press the “RESET” button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default settings.
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
4
2.1.2 Camera Connection
Step1:
Connect one end of the network
cable to the camera and the other
end to PC.
Step2:
Connect one end of the power cord
to the camera and the other end to
power sokcket to supply power for
the camera.
Step3:
Access the camera over IE or client
software to view live video images.
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
5
2.2 Hardware Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the following
steps:
1. Loosen the set screws with a hexagonal screw driver (attached with the camera), and take down
the back box shown as below:
Fig. 2.2.1 Remove the back box
2. Use the screws to fix the bottom board on the ceiling.
Fig. 2.2.2 Fix the bottom board
3. While viewing the video on the computer, adjust the camera’s view angle for your need.
NOTE:
If required, user can apply the pliers to
remove the clip (refer to the part marked
in dotted line) on the side of the back
box and then feed cables through the
opening to secure on the ceiling.
Otros manuales para DS-2CD7153-E
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de HIK VISION
HIK VISION
HIK VISION UD04828N Manual de usuario
HIK VISION
HIK VISION DS-2CD2763G0-IZS Manual de usuario
HIK VISION
HIK VISION DS-2DF7284-AW Manual de usuario
HIK VISION
HIK VISION DS-2AF1-7**-B Manual de usuario
HIK VISION
HIK VISION DS-2CV2021G2-IDW Manual de usuario
HIK VISION
HIK VISION DS-2CD6362F-I Guía del usuario
HIK VISION
HIK VISION DS-2CE16H0T-ITF Manual de usuario
HIK VISION
HIK VISION TURBO HD DS-2CE56D1T-IRP Manual de usuario
HIK VISION
HIK VISION DS-TCL400-E Manual de usuario
HIK VISION
HIK VISION AE-VC224T-IT Manual de usuario
HIK VISION
HIK VISION DS-2CC512 P(N)-FB Manual de usuario
HIK VISION
HIK VISION UD.6L0201B1015A01 Manual de usuario
HIK VISION
HIK VISION DS-2CV2026G0-IDW Manual de usuario
HIK VISION
HIK VISION ud21713b Manual de usuario
HIK VISION
HIK VISION DS-2CD7153-E Manual de usuario
HIK VISION
HIK VISION DS-2CE16H0T-ITPF Manual de usuario
HIK VISION
HIK VISION Platinum Series Manual de usuario
HIK VISION
HIK VISION ECI-B12F Manual de usuario
HIK VISION
HIK VISION NETWORK CAMERA Manual de usuario
HIK VISION
HIK VISION DS-2DE3204W-DE Manual de usuario
