Vicon V662-D-1 Instrucciones de funcionamiento

www.vicon-security.com

Installation and Operation Guide

XX259-00-01

V662-D-1 High-Resolution

Analog WDR Camera

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the

operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed

to be used in life-critical situations and must not be used for this purpose.

Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788

Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300

Document Number: 8009-8259-00-01 Issued: 513

LIMITATION OF LIABILITY

- ii -

THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL

RESPECTS; HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY

CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION

CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS

OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE

SUCH CHANGES

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT

ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS

OR OTHER OPENINGS ON THE EQUIPMEMT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral is

intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

- iii -

FCC COMPIANCE STATEMENT

CE COMPLIANCE STATEMENT

- iv -

FCC INFORMATION: This equipment has been tested and found

to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

CAUTION: Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-

003 du Canada.

WARNING

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required

to take adequate measures.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong is provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from th

e apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been moisture, does not operate normally, or has

been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE

BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE

RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING

OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUC-

TIONS UNLESS YOU QRE QUALIFIED TO DO SO.

- v -

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/

Listed Class 2 power source only.

- vi -

PRECAUTIONS

Before installation, carefully read the manual to ensure correct operation and setup,

heeding all warnings and instructions.

Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

Ensure manual is kept in good condition for future use.

Do not install the device near any heat sources such as radiators, heat registers, stoves,

or other equipment (including amplifiers) that produce heat.

Only use attachments/accessories specified by the manufacturer.

Should any liquid get into the housing, immediately disconnect the device from the

power supply and have it checked by authorized personnel before reusing.

Do not install the device in a place of high humidity or where exposed to gas or oil.

Installation and servicing by authorized personnel only, adhering to local safety

regulations.

Unless you are an authorized technician, never try to dismantle the device. To avoid

electric shock, never remove the screws or covers.

If a camera, do not expose the device to radioactivity. It will cause serious damage to

the CCD.

Use Certified/Listed Class 2 power source only.

Cleaning

Clean the device with a slightly damp soft cloth. Use a mild household detergent. Never

use strong solvents such as thinner or benzene as they might damage the finish of the

unit.

TABLE OF CONTENTS

CONTENTS OF PACKAGE ------------------------------------------------------------------------- 1

INTRODUCTION --------------------------------------------------------------------------------------- 2

CAMERA OVERVIEW -------------------------------------------------------------------------------- 3

CAMERA ADJUSTMENT ---------------------------------------------------------------------------- 4

CONTROL AND CONNECTIONS / DAY&NIGHT I/O TERMINALS----------------------- 14

LENS ----------------------------------------------------------------------------------------------------- 15

SPECIFICATIONS ------------------------------------------------------------------------------------- 16

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in

accordance with all local and national electrical and mechanical codes.

Carefully remove the color camera and its accessories from the carton and verify that

they were not damaged in shipment.

The contents of the package include:

1. Color CCD camera

2. Mini-DIN connector (for video-or DC-type auto-iris lens)

3. CS adapter ring for C mounting "C" lenses

4. This manual

- 1 -

INTRODUCTION

The V662-D-1 camera provides high-quality images using Sony 1/3” CCD and digital

signal processing LSIs.

Features:

1/3" Super-HAD CCD

Super High-Resolution (700 TVL)

Wide Dynamic Range (~x512)

Day & Night (Auto, Manual, External, Filter Delay, Change Level Adjust)

0.1 Lux (Color), 0.01 Lux (BW), 0.0001 Lux (Sens-Up B/W) @ F/1.2, 50IRE

Auto Electronic Shutter [1/60 (50) ~ 1/100,000] and Manual Electronic Shutter

Modes [1/60 (50) ~ 1/10,000]

Sens-Up (~x256)

2D-NR, 3D-NR

UDF Function(Ultra Deep Field)

Multi Camera Configuration Set (4-Sets/Night Profile, External Day/Night

Profile)

PVA/PVA+ (Personal Video Analytics)

Many Configurable Parameters

Various Detection Methods (Motion, Loitering Object, Abandon, Scene

Change, Unfocus, Windy Area)

Various Zone Event Detection Methods and Event Area Combinations

8 Objects Trace, 4 Objects Display

Concurrent Processing with All Detections and All Objects

Two Counting Blocks

Event String Sending (Editable String)

Digital Tracking (Using D-PTZ)

Various Detection Areas (max. 10 areas; Line, Rectangle, 4-Point

polygonal)

Backlight Compensation (EHLC, Auto, Spot)

i-Freeze Function (reduces recording space)

Privacy Mask or Mosaic (max. 10 areas; 4-point polygonal/transparency)

Digital Image Stabilization

Digital PTZ

Digital Effect (H/V reverse, 180 degree rotate, inverse, freeze)

White Pixel Removal

Focus Aid Function

Color Rolling Suppression

System Lock (4-character password)

C/CS, Back-Focus Camera for Easy Adjustment

Auto and Manual White Balance Modes

Supports Line-Lock External Synchronization

RS-485 Remote Camera Control

Multi-Language

Compatible with Video, DC-Type Lenses with OSD Select

Quick Connect for Video or DC Lens with 4-Pin Connector

User Certified/Listed Class 2 Power Source only

Operates in 12 VDC or 24 VAC

- 2 -

CAMERA OVERVIEW

FRONT VIEW

SIDE VIEW

TOP VIEW





Left Button

Up Button

Enter Button

Right Button

Down Button

Day/Night External I/O

Motion ALARM OUT

RS-485/UTP (optional)

Power Indicator

Video Output Connector (BNC)

UTP or BNC Transformation Switch

(optional)

AC/DC Compatible Input Terminal

AC Power Cord

REAR VIEW (Free Voltage)















REAR VIEW





















- 3 -

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon SURVEYOR 2000 S2000-CC22-EX Manual de usuario

Vicon

Vicon Roughneck V920D Series Instrucciones de instalación y funcionamiento

Vicon

Vicon V672-PTZ Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon VC-600 Series Manual de usuario

Vicon

Vicon VC466-DSP Manual de usuario

Vicon

Vicon V960D-W Series Manual de instrucciones

Vicon

Vicon IX4000AL Manual de usuario

Vicon

Vicon IX 2000 L Manual de usuario

Vicon

Vicon Cruiser SN663V-A Manual de usuario

Vicon

Vicon V905-CUBE Manual de usuario

Vicon

Vicon Roughneck AI V2000D Series Manual de usuario

Vicon

Vicon VC275-24 Guía del usuario

Vicon

Vicon CE202D-N Manual de usuario

Vicon

Vicon Series 234-00-02 Instrucciones de funcionamiento

Vicon

Vicon SN118C Manual de usuario

Vicon

Vicon V920B-A Series Manual de usuario

Vicon

Vicon Surveyor MKII Series XX282-00-01 Manual de usuario

Vicon

Vicon V920B Series Manual de usuario

Vicon

Vicon S2000-MSH-HHB Surveyor 2000 Manual de usuario

Vicon

Vicon V960-N Series Manual de usuario

Vicon

Vicon Surveyor MKII Series XX282-40-01 Guía rápida

Vicon

Vicon Roughneck Pro V2000B Series Manual de usuario

Vicon

Vicon i-onyx MP-980DN Manual

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario