HBM CFT Manual de usuario
Operating Manual | Bedienungsanleitung |
Manuel d'emploi | Istruzioni per l'uso |
English Deutsch Français Italiano
CFT
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64293 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-0111.0003
DVS: A02529_04_YCI_00 HBM: public
03.2019
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Sous réserve de modifications.
Les caractéristiques indiquées ne décrivent nos produits
que sous une forme générale. Elles n'impliquent aucune
garantie de qualité ou de durabilité.
Con riserva di modifica.
Tutti i dati descrivono i nostri prodotti in forma generica e non
implicano alcuna garanzia di qualità o di durata dei prodotti
stessi.
变更权利。
所有息是对我品性描。在性或性方
它并提。
Operating Manual | Bedienungsanleitung |
Manuel d'emploi | Istruzioni per l'uso |
English Deutsch Français Italiano
CFT
2A02529_04_YCI_00 HBM: public CFT
English
1 Safety instructions 3........................................
2 Markings used 7............................................
2.1 The markings used in this document 7..........................
3 Scope of supply and accessories 8..........................
3.1 Accessories (not included in the scope of supply) 8...............
4 General instructions for use 9...............................
5 Structure and mode of operation 10...........................
5.1 Force transducer operation 10..................................
6 Conditions on site 12........................................
6.1 Ambient temperature 12.......................................
6.2 Moisture and corrosion protection 12............................
7 Mechanical installation 13....................................
7.1 Important precautions during installation 13......................
7.2 General installation guidelines 14...............................
7.3 Force transducer installation 16.................................
7.3.1 Installation via central thread 16................................
8 Electrical connection 18......................................
9 Specifications 19............................................
10 Dimensions 21..............................................
Safety instructions
CFT A02529_04_YCI_00 HBM: public 3
1 Safety instructions
Intended use
Piezoelectric force transducers from the CFT type series are designed solely
for measuring static and dynamic compressive forces within the load limits
stated in the specifications. Any other use is not the intended use.
To ensure safe operation, it is essential to comply with the regulations in the
mounting instructions, the safety requirements listed below, and the data
specified in the supplied technical data sheets. It is also essential to observe
the applicable legal and safety regulations for the relevant application.
Force transducers are not intended for use as safety components. Please also
refer to the "Additional safety precautions" section. Proper and safe operation
of force transducers requires proper transportation, correct storage, setup and
mounting, and careful operation.
Load-carrying capacity limits
The information in the technical data sheets must be observed when using the
force transducers. The respective specified maximum loads in particular must
never be exceeded. The following limits set out in the technical data sheets
must not be exceeded:
SForce limits
SLateral force limits
SBreaking forces
SMaximum eccentricity
SPermissible dynamic loads
STemperature limits
Please note that when several force transducers are interconnected, the load/
force distribution is not always uniform. This means that one particular force
transducer may be overloaded even if the total of all the nominal (rated) force
for all sensors has not been reached yet.
Safety instructions
4A02529_04_YCI_00 HBM: public CFT
Use as machine elements
Force transducers can be used as machine elements. The "Load-carrying
capacity limits" section and the specifications to ensure the required overload
limit of your application must also be observed.
Accident prevention
The prevailing accident prevention regulations stipulated by the trade associa
tions must be taken into account, even though the breaking force is well in ex
cess of the full scale value.
Additional safety precautions
Force transducers cannot (as passive transducers) implement any (safety-rele
vant) cutoffs. This requires additional components and constructive measures,
for which the installer and operator of the plant is responsible.
In cases where a breakage or malfunction of the force transducer would cause
injury to persons or damage to equipment, the user must take appropriate
additional safety precautions that meet at least the applicable safety and acci
dent prevention regulations (e.g. automatic emergency shutdown, overload
protection, catch straps or chains, or other fall protection).
The electronic processor that processes the measurement signal should be
designed so that failure of the measurement signal cannot lead to secondary
failures.
General dangers when failing to follow the safety instructions
Force transducers are state-of-the-art and failsafe. Transducers can give rise
to residual dangers if they are mounted, installed, used and operated in
appropriately or by untrained personnel. Every person involved with setting up,
starting up, operating or repairing a force transducer must have read and un
derstood the mounting instructions and in particular the technical safety in
structions. Force transducers can be damaged or destroyed by non-designated
use of the force transducer or by non-compliance with the mounting and oper
ating manual, these safety instructions or other applicable safety regulations
when using the force transducers. A force transducer can break, particularly if
it is overloaded. The breakage of a force transducer can cause damage to
property or injury to persons in the vicinity of the force transducer.
Safety instructions
CFT A02529_04_YCI_00 HBM: public 5
If force transducers are not used as intended, or if the safety instructions or
specifications in the mounting and operating instructions are ignored, it is also
possible that a force transducer may fail or malfunction, with the result that per
sons may be injured or property damaged (due to the loads acting on or being
monitored by the force transducer).
The scope of supply and performance of the transducer covers only a small
area of force measurement technology, as measurements with piezoelectric
force transducers presuppose the use of electronic signal processing.
Equipment planners, installers and operators should always plan, implement
and respond to the safety engineering considerations of force measurement
technology in such a way as to minimize residual dangers. Pertinent national
and local regulations must be complied with.
Conversions and modifications
The design or safety engineering of the transducer must not be modified with
out our express permission. Any modification shall exclude all liability on our
part for any damage resulting therefrom.
Maintenance
The force transducers from the CFT series are maintenance free.
Disposal
In accordance with national and local environmental protection and material
recovery and recycling regulations, old transducers that can no longer be used
must be disposed of separately and not with normal household garbage.
If you require more information about disposal, please contact your local
authorities or the dealer from whom you purchased the product.
Safety instructions
6A02529_04_YCI_00 HBM: public CFT
Qualified personnel
Qualified personnel means persons entrusted with installing, mounting, starting
up and operating the product who possess the appropriate qualifications for
their work.
This includes people who meet at least one of these three requirements:
SKnowledge of the safety concepts of automation technology is a require
ment and as project personnel, you must be familiar with these concepts.
SAs automation plant operating personnel, you have been instructed how to
handle the machinery. You are familiar with the operation of the equipment
and technologies described in this documentation.
SAs commissioning engineers or service engineers, you have successfully
completed the training to repair the automation systems. Moreover, you are
authorized to start up, ground and label circuits and equipment in accor
dance with safety engineering standards.
It is also essential to comply with the legal and safety requirements for the rele
vant application during use. The same applies to the use of accessories.
The force transducer may only be installed by qualified personnel, strictly in
accordance with the specifications and with the safety requirements and regu
lations.
Markings used
CFT A02529_04_YCI_00 HBM: public 7
2 Markings used
2.1 The markings used in this document
Important instructions for your safety are highlighted. It is essential to follow
these instructions to prevent accidents and damage to property.
Symbol Meaning
WARNING This marking warns of a potentially dangerous situa
tion in which failure to comply with safety require
ments may result in death or serious physical injury.
CAUTION This marking warns of a potentially dangerous situa
tion in which failure to comply with safety require
ments may result in minor to moderate physical
injury.
Notice This marking draws your attention to a situation in
which failure to comply with safety requirements may
result in damage to property.
Important
This marking draws your attention to important infor
mation about the product or about handling the prod
uct.
Tip
This marking indicates tips for use or other informa
tion that is useful to you.
Information
This marking draws your attention to information
about the product or about handling the product.
Emphasis
See …
Italics are used to emphasize and highlight text and
identify references to chapters, diagrams, or external
documents and files.
Scope of supply and accessories
8A02529_04_YCI_00 HBM: public CFT
3 Scope of supply and accessories
SCFT piezoelectric force transducer
SMounting instructions
STest record
3.1 Accessories (not included in the scope of supply)
Accessories Ordering number
Connection cable for piezoelectric sensors with a 10-32UNF
plug on both sides. Available in different lengths up to 7 m
1-KAB143-x
Connection cable for piezoelectric sensors with a 10-32UNF
plug on one side and a BNC plug on the other cable end.
Available in different lengths up to 3 m
1-KAB176-x
Cable coupling to extend piezoelectric connection cables.
10-32UNF at both ends.
1-CCO
Summing box for parallel connection of up to four piezoelectric
sensors to one charge amplifier. Connector sockets: 10-32UNF
1-CSB4/1
Tabla de contenidos
Idiomas:
Otros manuales de Instrumento de medición de HBM
HBM
HBM Z6/M Manual de usuario
HBM
HBM HBK U93 Manual de usuario
HBM
HBM FS65 Manual de usuario
HBM
HBM RTN Manual de usuario
HBM
HBM T10F Manual de usuario
HBM
HBM T40S7 Manual de usuario
HBM
HBM Z6AM Manual de usuario
HBM
HBM WA Series Manual de usuario
HBM
HBM T10FS Manual de usuario
HBM
HBM C16i series Manual de usuario
HBM
HBM PW29P Series Manual de usuario
HBM
HBM FS42 Manual de usuario
HBM
HBM DMP41 Manual de usuario
HBM
HBM T40B Manual de usuario
HBM
HBM ME30 Manual de usuario
HBM
HBM ME250 S6 Manual de usuario
HBM
HBM KDB Manual de usuario
HBM
HBM C15 Manual de usuario
HBM
HBM BU18 Manual de usuario
HBM
HBM KMR Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario