HBM C9C Manual de usuario

Mounting Instructions | Montageanleitung |

Notice de montage | Istruzioni per il montaggio

English Deutsch Français Italiano

C9C

Hottinger Baldwin Messtechnik GmbH

Im Tiefen See 45

D-64293 Darmstadt

Tel. +49 6151 803-0

Fax +49 6151 803-9100

[email protected]

www.hbm.com

Mat.: 7-0111.0009

DVS: A03729_03_YI0_01 HBM: public

07.2020

EHottinger Baldwin Messtechnik GmbH.

Subject to modifications.

All product descriptions are for general information only.

They are not to be understood as a guarantee of quality or

durability.

Änderungen vorbehalten.

Alle Angaben beschreiben unsere Produkte in allgemeiner

Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits

garantie dar.

Sous réserve de modifications.

Les caractéristiques indiquées ne décrivent nos produits

que sous une forme générale. Elles n'impliquent aucune

garantie de qualité ou de durablilité.

Con riserva di modifica.

Tutti i dati descrivono i nostri prodotti in forma generica e non

implicano alcuna garanzia di qualità o di durata dei prodotti

stessi.

Mounting Instructions | Montageanleitung |

Notice de montage | Istruzioni per il montaggio

English Deutsch Français Italiano

C9C

2A03729_03_YI0_01 HBM: public C9C

English

1 Safety instructions 4........................................

2 Scope of supply, accessories and equipment variants 9.......

3 General application instructions 11...........................

4 Structure and mode of operation 12...........................

4.1 Transducer 12................................................

4.2 Strain gage covering agent 12..................................

4.3 Inline amplifier 12.............................................

5 Conditions on site 14........................................

5.1 Ambient temperature 14.......................................

5.2 Moisture and corrosion protection 14............................

5.3 Deposits 15..................................................

6 Mechanical installation 16....................................

6.1 Important precautions during installation 16......................

6.2 General installation guidelines 16...............................

7 Electrical connection 20......................................

7.1 Connection to measuring amplifier without permanently connected

amplifier module 20...........................................

7.1.1 General information and connection 20..........................

7.1.2 Cable extension and cable shortening 21.........................

7.1.3 EMC protection 21............................................

7.1.4 TEDS transducer identification 22...............................

7.2 Electrical connection of measuring amplifier with amplifier module 23

7.2.1 General information 23........................................

7.2.2 Connecting the device 23......................................

7.2.3 Operating the inline amplifier/zeroing the measurement chain 24....

C9C A03729_03_YI0_01 HBM: public 3

8 Dimensions 26..............................................

9 Specifications 29............................................

9.1 Versions and ordering numbers 33..............................

Safety instructions

4A03729_03_YI0_01 HBM: public C9C

1 Safety instructions

Intended use

Force transducers in the C9C series are designed solely for measuring static

and dynamic compressive forces within the load limits stated in the

specifications. Any other use is not the intended use.

To ensure safe operation, it is essential to comply with the regulations in the

mounting instructions, the safety requirements listed below, and the data

specified in the supplied technical data sheets. It is also essential to observe

the applicable legal and safety regulations for the relevant application.

Force transducers are not intended for use as safety components. Please also

refer to the “Additional safety precautions” section. Proper and safe operation

of force transducers requires proper transportation, correct storage, setup and

mounting, and careful operation.

Load-carrying capacity limits

The information in the technical data sheets must be observed when using the

force transducers. The respective specified maximum loads in particular must

never be exceeded. The following limits set out in the technical data sheets

must not be exceeded:

SForce limits

SLateral limit forces (by oblique application, if necessary)

SExceeding the permissible eccentricity of force application

SBreaking forces

SPermissible dynamic loads

Stemperature limits

SElectrical load limits

Please note that when several force transducers are interconnected, the load/

force distribution is not always uniform.

Safety instructions

C9C A03729_03_YI0_01 HBM: public 5

Use as machine elements

Force transducers can be used as machine elements. When used in this

manner, note that to favor greater sensitivity, force transducers were not

designed with the safety factors usual in mechanical engineering. Please refer

to the “Load-carrying capacity limits” section and the specifications.

Accident prevention

The prevailing accident prevention regulations must be taken into account,

even though the nominal (rated) force values in the destructive range are well

in excess of the full scale value.

Additional safety precautions

Force transducers cannot (as passive transducers or as a measurement chain)

implement any (safety-relevant) cutoffs. This requires additional components

and constructive measures, for which the installer and operator of the plant is

responsible.

In cases where a breakage or malfunction of the force transducer would cause

injury to persons or damage to equipment, the user must take appropriate

additional safety precautions that meet at least the applicable safety and

accident prevention regulations (e.g. automatic emergency shutdown, overload

protection, catch straps or chains, or other fall protection).

The electronic processor that processes the measurement signal should be

designed so that failure of the measurement signal cannot lead to secondary

failures.

General dangers of failing to follow the safety instructions

Force transducers are state-of-the-art and failsafe. Transducers can give rise

to residual dangers if they are mounted, installed, used and operated

inappropriately or by untrained personnel. Every person involved with setting

up, starting up, operating or repairing a force transducer must have read and

understood the mounting instructions and in particular the technical safety

instructions. The force transducers can be damaged or destroyed by non-

designated use of the force transducer or by non-compliance with the mounting

and operating manual, these safety instructions or other applicable safety

regulations (safety and accident prevention regulations of the Employers'

Safety instructions

6A03729_03_YI0_01 HBM: public C9C

Liability Insurance Association) when using the force transducers. A force

transducer can break, particularly if it is overloaded. The breakage of a force

transducer can cause damage to property or injury to persons in the vicinity of

the force transducer.

If force transducers are not used as intended, or if the safety instructions or

specifications in the mounting and operating instructions are ignored, it is also

possible that a force transducer may fail or malfunction, with the result that

persons may be injured or property damaged (due to the loads acting on or

being monitored by the force transducer).

The scope of supply and performance of the transducer covers only a small

area of force measurement technology, as measurements with (resistive) strain

gage sensors require electronic amplification, and measurement chains require

further signal processing. Equipment planners, installers and operators should

always plan, implement and respond to the safety engineering considerations

of force measurement technology in such a way as to minimize residual

dangers. Pertinent national and local regulations must be complied with.

The markings used in this document

Symbol Meaning

WARNING This marking warns of a potentially dangerous

situation in which failure to comply with safety

requirements could result in death or serious physical

injury.

CAUTION This marking warns of a potentially dangerous

situation in which failure to comply with safety

requirements could result in slight or moderate

physical injury.

Note This marking draws your attention to a situation in

which failure to comply with safety requirements

could lead to property damage.

Important

This marking draws your attention to important

information about the product or about handling the

product.

Safety instructions

C9C A03729_03_YI0_01 HBM: public 7

MeaningSymbol

Tip

This marking indicates tips for use or other

information that is useful to you.

Emphasis

See …

Italics are used to emphasize and highlight text and

identify references to sections of the manual,

diagrams, or external documents and files.

Conversions and modifications

The design or safety engineering of the transducer must not be modified with

out our express permission. Any modification shall exclude all liability on our

part for any damage resulting therefrom.

Maintenance

The force transducers of the C9C series are maintenance free

Disposal

In accordance with national and local environmental protection and material

recovery and recycling regulations, old transducers that can no longer be used

must be disposed of separately and not with normal household garbage.

If you require more information about disposal, please contact your local

authorities or the dealer from whom you purchased the product.

Qualified personnel

Qualified personnel means persons entrusted with installing, mounting, starting

up and operating the product who possess the appropriate qualifications for

their work.

This includes people who meet at least one of these three requirements:

SAs project personnel, you know and are familiar with the safety concepts of

automation technology.

SAs automation plant operating personnel, you have been instructed how to

handle the machinery. You are familiar with the operation of the equipment

and technologies described in this documentation.

Safety instructions

8A03729_03_YI0_01 HBM: public C9C

SAs a commissioning or service engineer, you have successfully completed

training on the repair of automation plants. Moreover, you are authorized to

start up, ground and label circuits and equipment in accordance with safety

engineering standards.

During use, compliance with the legal and safety requirements for the relevant

application is also essential. The same applies to the use of accessories.

The force transducer may only be installed by qualified personnel, strictly in

accordance with the specifications and with the safety requirements and

regulations.

Otros manuales para C9C

Tabla de contenidos

Idiomas:

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario