Franke A300 Guía de configuración
Cleaning instructions A300
Franke Kaffeemaschinen AG 1
INTRODUCTION
The perfect coffee experience depends on a perfectly cleaned coffee machine. Clean your coffee machine at least
once a day and more frequently if necessary.
The automatic cleaning process involves cleaning the coffee machine and cleaning the cooling unit.
Required accessories
– Cleaning tablets
– Microfiber cloth
– Brush set
– Collecting container (only on machines with no wastewater connection)
Additional accessories required for machines with a milk system
– Milk system cleaning agent
– With the SU05: cleaning container
NOTICE
Soiled accessories
Soiled accessories can have a negative affect on the functionality of the machine and the quality of the drinks pro-
duced.
a) Clean the accessories by using the 5-step method.
b) Follow the applicable instructions for accessories.
The removable parts of the coffee machine are not dishwasher-safe.
5-step method
1. Remove coarse dirt with a brush or paint brush.
2. Soak the parts in hot water with a mild cleaner.
3. Wash the parts.
4. Rinse the parts thoroughly.
5. Dry the parts.
20165092 • Cleaning instructions • 01 • 7/31/2020
Cleaning instructions A300
2 Franke Kaffeemaschinen AG
STARTING THE CLEANING PROCESS
When the cleaning cycle is complete, the machine either switches back to the maintenance level or the energy sav-
ing mode. Your service technician can set the desired option for you.
1. Tap the Franke logo at the top left.
2. Entering the PIN 1111.
3. Press OK.
My settings
Counters
Cleaning and maintenance
4. Select Cleaning and maintenance.
Cleaning the coffee machine
Descaling the coffee machine
Rinsing the coffee machine
Wipe protection
5. Tap Clean Coffee Machine.
6. Confirm message with Yes to begin the cleaning
process.
7. Follow the instructions on the user interface and
confirm the individual steps by selecting Next.
ðThe machine shows the next step.
For machines without a wastewater connection, have the collecting container ready and place it on the drip grid
when the corresponding prompt appears on the screen.
20165092 • Cleaning instructions • 01 • 7/31/2020
Cleaning instructions A300
Franke Kaffeemaschinen AG 3
CLEANING WEEKLY
In addition to the daily cleaning process, clean the machine components listed in this section at least once a week.
Clean the machine immediately if you find that it is dirty or clogged. Follow the cleaning instructions when doing so.
Cleaning the surface of the machine
1. Clean the surface of the machine with a damp
cloth.
2. If necessary, use a mild cleaner. NOTICE!Do
not use abrasive cleaners.
Cleaning the drip tray and drip grid
NOTICE
Escaping liquid
Applies to machines with a wastewater connection! On machines with a wastewater connection, if water remains in
the drip tray, this can escape when the drip tray is removed.
a) Before removing the drip tray, ensure that the remaining water has drained.
1. Clean the drip tray and drip grid using the 5-step
method.
2. Thoroughly clean the projecting features on the
underside of the drip tray lid.
The rear [1] of the drip tray must be clean and dry, both inside and out. If it is not, this may cause the drip tray's
continuous level sensor to issue an alert in error.
If the coffee machine has been connected to the wastewater system, there are two O-rings [2] on the rear of the
drip tray. These must be moistened with water so that the drip tray can lock in place properly. Otherwise, the ca-
pacitive sensor cannot detect the drip tray.
20165092 • Cleaning instructions • 01 • 7/31/2020
Cleaning instructions A300
4 Franke Kaffeemaschinen AG
Cleaning the water tank (if present)
Inspect the water tank daily for dirt and limescale. If there is any dirt or limescale, clean it off immediately.
1. Remove and empty the water tank.
2. Clean the water tank using the 5-step method.
Cleaning the powder hopper (if present)
1. Remove the grounds container.
2. Open the door lock (option) with the key.
3. Press the locking mechanism on the inside and
open the door.
4. Pull the locking slide.
5. Lift up the powder hopper and remove it.
6. Empty the powder hopper.
7. Clean the powder hopper with a cloth. Use de-
tergent if necessary. Wipe the inside of the hop-
per with a dry cloth.
8. Replace the powder hopper.
9. Push in the locking slide.
10. Close the door and insert the powder hopper.
Cleaning the screen
1. Tap the Settings symbol at the top left.
2. Select Cleaning and maintenance.
3. Select Wipe Protection.
ðThe operating interface is locked for 20 sec-
onds.
4. Clean the surface with a damp cloth.
20165092 • Cleaning instructions • 01 • 7/31/2020
Otros manuales para A300
2
Otros manuales de Cafetera de Franke
Franke
Franke T 200 Manual de usuario
Franke
Franke A400 Manual de usuario
Franke
Franke bremer VIVA au lait Manual de usuario
Franke
Franke SPECTRA I Manual de usuario
Franke
Franke Spectra S Manual de usuario
Franke
Franke SB1200 FM CM Manual de usuario
Franke
Franke A300 Manual de usuario
Franke
Franke A200 Manual de usuario
Franke
Franke PURA PRONTO Manual de usuario
Franke
Franke Flair Manual de usuario
Franke
Franke Flair Manual de usuario
Franke
Franke SB1200 FM CM Manual de usuario
Franke
Franke A1000 Manual de usuario
Franke
Franke FM850 Manual de usuario
Franke
Franke SINFONIA Manual de usuario
Franke
Franke Ecolino Manual de usuario
Franke
Franke Spectra S Manual de usuario
Franke
Franke Flair Manual de usuario
Franke
Franke Evolution Manual de usuario
Franke
Franke SU03 Manual de usuario
