Dancover Titanium Manual de usuario

Assembly Manual

Titanium:

3,5x8x3x4

3,5x10x3,5x4,5

3,5x12x3,5x4,5

Table of content.

1. FrontPage.

2. Table of content.

3. List of parts.

4. Assembly.

7. Mounting the covers.

9. Contact Information.

Part list for Titanium 3,5x8x3x4/3,5x10x3x4/3,5x12x3x4

Part Number

Description

Qty. (pc.)

Curved roof tube (top)

at two ends

2/2/2

Curved roof tube (top) in

the middle

3/4/5

Curved roof tube (side)

at two ends

4/4/4

Curved roof tube (side)

in the middle

6/8/10

Lower sidewall with

base plate (middle)

6/8/10

Lower sidewall with

base plate (ends)

4/4/4

Upper side wall (middle)

6/8/10

Upper side wall (ends)

4/4/4

Roof purlins and

horizontal wall at both

sides

52/65/78

Cross tube in front and

back panel

8/8/8

Slant supporting tube

8/8/8

Roof cover

Front cover

Back cover

Stake peg

44/48/52

Rope for fixing cover

Bolts M14x30

104/154/204

M14x70

30/36/42

M12x50

16/16/16

M14x50

8/8/8

Inner joints for cross

tubes and slant

supporting tubes.

8/8/8

Assembly.

3,5 x 8 x 3 x 4

3,5 x 10 x 3 x 4

3,5 x 12 x 3 x 4

Step #1:

Place base plates as shown in figure #1. Make sure that diagonals are equal in

length. Secure base plates with stake pegs. Make sure to use at least 2 stake

pegs per base plate and drive them into the ground so they cross each other as

shown in figure #3.

Step #2:

Assemble two sidewalls and connect them as shown in figure #2. Make sure that

all bolts are secured tightly and placed from the outside and in, to avoid damage

on the cover. Figure 3 and 4 shows how joints should be assembled, both

shown from inside.

Figure 1

Figure 2

Figure3 Figure 4

Step #3:

Connect the two sidewalls with the curved roof tubes. Then connect these with the

horizontal bars as shown in figure # 5. Figure #6 and #7 show how joints are sup

posed to be assembled.

Step #4:

Assemble the next two sidewalls in extension of the already erected sides as

shown

Figure 5

Figure 6

Figure 7

Step # 5

Repeat steps #3 and #4 until the entire frames has been erected. Note that you

have to install windcrosses in the sidewall sections closest to the corners. (see

Figure #4). It should look like figure #8.

Step #6:

Make sure that all bolts are inserted from the outside in before proceeding with

the cover. Make sure all foot plates are secured to the ground.

Figure 8

Figure 9

Mounting the Cover

Step #7

Tie in a crossbeam in one side of the cover. as shown in figure # 10.

Step #8

Pull the cover over the top of the structure using 3 ropes tied to the crossbeam.

See figure # 11

Step #9:

Make sure that the cover sits on evenly on both sides of the frame.

Step #10:

Tie the cover to the bottom tensioning bar. Make sure that it is tightened.

Figure 10

Figure 11

Step # 11:

Mount the front and the back cover by weaving the rope around the bars as

shown in figure # 12 and # 13. Do the same with the roof cover. Make sure to use

one rope for each covers.

Step # 12:

Make sure that the edge of the roof cover overlaps the front/back cover (over the

end bars) as shown in figure #14. Slide a rope through the end sleeves and

tighten the rope through the hoops of the corner footplates.

Step # 13:

Make sure all ropes are secured and tight.

Figure 12

Figure 13

figure 14

Contact Information.

Dancover UK

Tel. 020 722 102 20

Fax. (+45) 70 26 76 30

E-mail: mail@dancover.co.uk

VAT NO. 894 5631 80

For warranty/claims please fill out our form at:

http://www.dancovershop.com/info.asp?text=5

And we will get back to you as soon as possible.

Otros manuales para Titanium

Este manual sirve para los siguientes modelos

Otros manuales de Carpa de Dancover

Dancover

Dancover 2m Series Manual de usuario

Dancover

Dancover B788 Manual de usuario

Dancover

Dancover PRO EventZone 9m Series Manual de usuario

Dancover

Dancover PRO XL Manual de usuario

Dancover

Dancover 5.4m Series Manual de usuario

Dancover

Dancover PRO EventZone 9m Series Manual de usuario

Dancover

Dancover TentZing CT168040 Manual de usuario

Dancover

Dancover Pagoda Marquee UNICO 6x6m Manual de usuario

Dancover

Dancover ST01100 Manual de usuario

Dancover

Dancover Oceancover PVC Manual de usuario

Dancover

Dancover Titanium Tent Manual de usuario

Dancover

Dancover 2,4m Series Manual de usuario

Dancover

Dancover B788 Manual de usuario

Dancover

Dancover CombiTent SEMI PRO 6m Series Manual de usuario

Dancover

Dancover 5m PE Series Manual de usuario

Dancover

Dancover Storage tent PRO 3,6m Series Manual de usuario

Dancover

Dancover 2m Series Manual de usuario

Dancover

Dancover Multipavillon 6x9m Manual de usuario

Dancover

Dancover Pole Tent Semi PRO 6x6m Manual de usuario

Dancover

Dancover Patio Cover Expert 3x5m Manual de usuario

Dancover

Dancover 3m storage pro Manual de usuario

Dancover

Dancover Crestline 2L Manual de usuario

Dancover

Dancover CombiTent PARTY TENT SEMI PRO Manual de usuario

Dancover

Dancover Multipavillon 3x6m Manual de usuario

Manuales populares de Carpa de otras marcas

OZTENT

OZTENT JV SIGNATURE EDITION Manual de usuario

GigaTent

GigaTent Summer Chalet Mini Tent Manual de usuario

Coleman

Coleman 2000007827 Manual

ShelterLogic

ShelterLogic 107153 Manual de usuario

Outsunny

Outsunny 84C-230 Manual de usuario

Napier

Napier SPORTZ COVE 61 Series Manual de usuario

EuroTrail

EuroTrail ATLANTIS PRO Manual de usuario

Reimo

Reimo Marina Manual de usuario

TiiTENT

TiiTENT TB300 Manual de usuario

Coleman

Coleman 2000033134 Guía de instalación

Ozark Trail

Ozark Trail W784.1 Guía de inicio rápido

SlingFin

SlingFin CrossBow 2 Manual de usuario

Coleman

Coleman 9600-141 Manual de usuario

Palram

Palram Arizona 5000 Wave - WINGS Manual de usuario

COVERPRO

COVERPRO 56184 Instrucciones de montaje

Vango

Vango Zenith 100 Manual de usuario

Costway

Costway PATIOJOY OP70818 Manual de usuario

Clarke

Clarke PUC 88 Manual de usuario