CYP CPRO-U4H1HFS Manual de usuario

CPRO-U4H1HFS

UHD 4 to 1 HDMI Switcher

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 May 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 25/03/15 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 Remote Control................................5

6.4 RS-232 Pin Assignment .....................5

6.5 IP Searching Software Application

and Installation.......................................6

6.6 RS-232 & Telnet Commands............7

6.7 EDID Content....................................9

6.8 Telnet Control .................................10

6.9 WebGUI Control .............................12

7. Connection Diagram .......................... 14

8. Specications ...................................... 15

9. Acronyms ............................................. 17

1. INTRODUCTION

The 4 by 1 HDMI Switcher enables the switching of four HDMI sources

to a single HDMI output, allowing a display or AV Receiver to select

between four devices. With fast switching technology the device

can greatly eliminate the time required by swapping or turning ON/

OFF the connected displays. It supports 4K2K, 3D, 36-bit Deep Color,

Hi-Def. lossless audio and other features dened by the latest HDMI

specications. The management of source/sink scenarios can be

operated easily through on-panel buttons, IR remote control, RS-232,

Telnet and WebGUI control.

2. APPLICATIONS

• Home Theater/Entertainment

• Lecture Room/Hall Presentation

• Show Room/Demo Room

• Public Commercial Display

• Information Board

3. PACKAGE CONTENTS

• UHD 4 to 1 HDMI Switcher

• Remote Control with Battery

• IR Receiver Cable

• 5V/2.6A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as Blu-ray/DVD/PS3 player or Set-Top-

Box and output HDMI TV/Display with connection cables.

5. FEATURES

• HDMI (with 3D & 4K2K supported) and HDCP compliant

• Select any one of four HDMI sources and display on a HDTV display

with fast switching between sources

• Supports 3D signals pass-through

• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30, 50/60

YUV_420 & 4096x2160@24, 50/60 YUV_420)

• Supports HDMI data rate from 300Mbps to 3Gbps and 'Deep Color'

up to 1080p/36-bit

• Supports selection of Standard (Fixed) or TV (Downstream) EDID

settings

• Supports Audio pass-through of High-denition Audio formats (LPCM

2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby TrueHD and

DTS-HD Master Audio)

• HDMI inputs support ‘Standard’ and ‘Apple’ HDCP modes.

Selecting ‘Apple’ mode guarantees the compatibility of Apple

devices with this switcher

• Supports Telnet and WebGUI control

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWERSYNCINPUT 1234

UHD 4 TO 1 SWITCHER CPRO-U4H1HFS

1 2 3 4

1IR Window: This IR Receiver receives the remote control signal from

the packaged included remote control only with IR frequency at

38kHz.

2POWER & LED: Press this button to turn ON the device or set the

device to standby mode. The LED will illuminate in green when

switch to ON. This device contains power last memory and

therefore, when the power is connected the device will switch to

ON/Standby according to the last status.

*IP Reset: Press this button together with INPUT button for 3 second

under power ON status, when the LED blink for once it means IP

Reset complete.

3SYNC: This LED will illuminate when both input source and output

display are linked with active signal.

4IN 1~4: Press the INPUT button to select an input from the 4 input

sources, LED will illuminated according to the selection.

6.2 Rear Panel

1234

HDMI IN HDMI OUT SERVICECONTROL RS-232IR IN DC 5V

1 65432 7

1HDMI IN: Connect from source equipment such as Blu-ray/DVD/

PS3 players, Set-Top-Box or any HDMI equipped source device for

input signal sending. The device obtain auto detection function

and will detect the last plug-in source for display on output when

it is unplugged, the device will detect rotationally from 1~4 input

source for display on output.

2HDMI OUT: Connect to HDMI TV/display or HD Amplier for output

image and or audio display.

3SERVICE: This slot is reserved for rmware update use only.

4CONTROL: Connect from PC/Laptop with active internet service

for Telnet or WebGUI control with RJ-45 terminated cable.

5RS232: Connect from PC/Laptop for RS-232 command sending to

control the device.

6IR IN: Connect the IR Receiver included in the package for IR

signal receive from the included remote control.

7DC 5V: Connect the adaptor with power cord included in the

package and connect to AC wall outlet for power supply.

6.3 Remote Control

1POWER: Press this button to switch ON the

device or to set it to standby mode.

2INPUT: Press 1~4 to select input source.

6.4 RS-232 Pin Assignment

Switcher

Remote Control

PIN Assignment PIN Assignment

1 NC 1 NC

2Tx 2Rx

3Rx 3Tx

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 115200bps

Data Bit: 8 bits

Parity: None

Flow Control: None

Stop Bit: 1

CR-72

POWER

INPUT

Tabla de contenidos

Otros manuales de Cambiar de CYP

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario