CYP CPRO-3D42S Manual de usuario
CPRO-3D42S
HDMI 4 by 2 v1.4 Switcher
with HEAC
Operation Manual
CPRO-3D42S
Draft Manual
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology. All Rights Reserved.
Version 1.0 January 2011
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
RDV1 20110103 Preliminary Release
Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. PackageContents......................................................................1
4. SystemRequirements..................................................................1
5. Features........................................................................................2
6. Specifications..............................................................................2
7. OperationControlsandFunctions............................................. 3
7.1 Front Panel .................................................................... 3
7.2 Rear Panel .................................................................... 4
8. RemoteControl............................................................................5
9. RS-232Protocol............................................................................5
9.1 Pin Definition ................................................................. 5
9.2 Command .................................................................... 5
10.ConnectionandInstallation...................................................... 6
1
1. Introduction
This is a high performance four input & two outputs HDMITM Switcher supports,
the output ports support Audio Return Channel (ARC) and HDMI Ethernet
Channel (HEC) follow by HDMI v1.4 specication. The ARC provides an S/
PDIF link from and HDMITM sink and output through ARC port to AVR to get
true audio from the sink. The HEC feature adds a connection to the HDMI
link that is capable of carrying the same data as a full duplex, 100Mbps
Ethernet connection. Using an HDMI with HEAC cable allowing for convenient
integration of Digital Televisions (DTVs) into the end user’s home network system.
2. Applications
• Simultaneous display one HDMI source on 2 TVs
• Professional audio display
• Showroom display
• Education demo
• Commercial usage
3. Package Contents
• 4 x 2 HDMI Switcher with HEAC
• 5V/2.6A DC power supply adaptor
• Operation Manual
4. System Requirements
• Source equipments with HDMI output connector(s)
• Displays TV/monitor with HDMI input connector(s)
• Two output ports can be connect to the Ethernet Channel (HEC) of Digital
Televisions (DTVs) from end user’s home network system and Audio Return
Channel (ARC) can output to the AVR to get true audio from the sink.
2
5. Features
• Support multiplexed HDMI 4-input and 2-output
• Two output ports support Ethernet Channel (HEC) and Audio Return
Channel (ARC) follow by HDMI v1.4 specication
• HDMI 1.4 support:
√ Audio Return Channel (ARC)
√ 3D
√ CEC 1.4
√ HDMI Ethernet Channel (HEC), enabling high-speed, bi-directional
networking at up to 100Mb/sec
• HDCP repeater support
• Deep Color support 36/30/24-bit, 1080p@60Hz
• EDID can selected Standard, TV or Lock EDID feature
• Audio support:
√ HDMI 1.4 compatible audio interface
√ Dedicated, exible audio input/output port
√ Dolby TrueHD
√ DTS-HD Master Audio
√ Full audio input and output support
6. Specications
Frequency Bandwidth 2.25Gbps (single link)
Input Ports 4x HDMI (Female type)
Output Ports 2 x HDMI (Female type)
2 x Ethernet
2 x ARC
Output Resolution 480i ~1080p 50/60, 1080p24, VGA~UXGA
ESD Protection Human Body model: ±8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) (W) x (D) x (H)
Weight(g)
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C/ 32°F ~104°F
Storage Temperature -20°C ~ 60°C/ -4°F ~140°F
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 4.1W
Transmitter
Input Port 1 x USB (B type)
Output Port 1 x RJ45
Receiver
Input Port 1 x RJ45
Output Ports 4 x USB (A type)
ESD Protection Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
Power Supply 5V / 3.2A (US/EU standards, CE/FCC/UL certied)
Dimensions(mm) 102 (W) x 95 (D) x 25 (H)
Weight(g) 214 / Transmitter, 220 / Receiver
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Power Consumption 5W / Transmitter, 12W / Receiver
Relative Humidity 20~90% RH (non condensing)
3
7. Operation Controls and Functions
The following sections describe the hardware components of the unit.
7.1FrontPanel
12 43 5
1. IR Remote Control Sensor.
2. Audio/3D content indicator: The system will automatically detect
incoming audio/video signal and the Green LEDs will illuminate
accordingly.
3. Input selection: Press input button to select input source, the Blue LED will
illuminate accordingly.
4. EDID selection: This EDID control button is determined if you are going to
use the EDID from the display attached to output 1 or use an onboard
EDID the Green LED will illuminate accordingly. When press EDID button
longer then 3 seconds, the RED LED will illuminate which means the EDID
already lock STD or TV EDID as you selected accordingly.
5. Power LED Indicator: The LED will illuminate when the power is
connected.
4
7.2RearPanel
1 322 2 4
1. RS-232: This slot is for RS-232 control signal sending and is for service only.
2. HDMI 1~2out/ARC 1~2/Ethernet 1~2: Connect Ethernet and Audio Return
Channel to capabilities of sink, The sink will pass the Ethernet and Audio
signal via HDMI input to HDMI output port individually, each HDMI will
separate the Ethernet and audio and send it out from ARC and Ethernet
ports. For the ARC, the user had a sink with a built-in tuner or DVD player
and wanted to send content “upstream” from the TV back to the audio
system to play and multi-channel audio.
The HDMI Ethernet Channel, it can consolidates video, audio and data
streams into a single HDMI cable to the Ethernet Hub/AP to access the
internet and it incorporates a dedicated data channel into the HDMI
link, enabling high-speed, bi-directional networking at up to 100Mb/sec
to control and search from the sink.
Note:
1. Be sure to connect devices with one of the new cables designed
to support HDMI Ethernet Channel functionality, either the
standard HDMI cable with Ethernet or High Speed HDMI cable
with Ethernet.
2. When the HDMI output with the Audio and ARC are exist at the
same time the ARC will be the rst priority to access.
3. HDMI input 1~4: Connect to HDMI or DVI sources equipment such
as DVD player or set-top-box for input video and audio sending.
4. Power: Plug the DC 5V power supply into the splitter and connect
the adaptor to AC wall outlet.
5
8. Remote Control
① Power button: Press to switch On the device,
press it again to set the device in standby mode.
② 1~4: Press the desire input button to select the
input source. 2
1
9. RS-232 Protocol
9.1PinDenition
CPRO-3D42S Remote Control Console
PIN Denition
►
◄
PIN Denition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1 bit
Flow Control: None
9.2Command
Command Action
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 11 Output Select Input 1
PORT 12 Output Select Input 2
PORT 13 Output Select Input 3
PORT 14 Output Select Input 4
PORT 21 Output Select Input 1
PORT 22 Output Select Input 2
PORT 23 Output Select Input 3
PORT 24 Output Select Input 4
6
10. Connection and Installation
DVD
DVD Blu-Ray
Blu-Ray
HDTV
AVR1
AVR1
or
PC NB
HUBHUB
HDTV
INTERNET
Otros manuales para CPRO-3D42S
1
Tabla de contenidos
Otros manuales de Cambiar de CYP
CYP
CYP PU-8H8HBT Manual de usuario
CYP
CYP EL-5500 Manual de usuario
CYP
CYP CH-2537TXWPUS Manual de instalación
CYP
CYP EL-5300 Manual de usuario
CYP
CYP EL-5400D Manual de usuario
CYP
CYP AU-11CA Manual de usuario
CYP
CYP CLUX-41AP Manual de usuario
CYP
CYP EL-41AT Manual de usuario
CYP
CYP MA-U42 Manual de usuario
CYP
CYP CPRO-U4H1HFS Manual de usuario
CYP
CYP PU-1H2HBTE Manual de usuario
CYP
CYP CPLUS-V4H1H Manual de usuario
CYP
CYP PU-22HC Manual de usuario
CYP
CYP EL-5600 Manual de usuario
CYP
CYP EL-C61C Manual de usuario
CYP
CYP OR-88U-4K22 Manual de usuario
CYP
CYP CDPS-41SQ Manual de usuario
CYP
CYP EL-31SY Manual de usuario
CYP
CYP EL-42S Manual de usuario
CYP
CYP CPLUS-401V Manual de usuario
