CYP CFSW-51MHL Manual de usuario
Operation Manual
Operation Manual
CFSW-51MHL
5 x 1 HDMI/MHL Fast Switcher
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VR0 29/06/2012 Preliminary Release
CONTENTS
1. Introduction..............................................1
2. Applications.............................................1
3. Package Contents .................................. 1
4. System Requirements.............................. 1
5. Features.................................................... 2
6. Operation Controls and Functions......... 3
6.1 Front Panel ..........................................3
6.2 Rear Panel...........................................4
7. Remote Control........................................ 5
8. RS-232 Protocols ...................................... 6
8.1 Pin Assignment ...................................6
8.2 Commands.........................................6
9. Connection and Installation................... 8
10. Specications ........................................ 9
11. Acronyms ...............................................9
1
1. INTRODUCTION
This is ve inputs and one output HDMI fast switcher which has MHL
(Mobile High-Denition Link) support integrated on its fth input port.
With the MHL port, you can share high denition video and audio from
any of your MHL-ready mobile devices on an HDTV, and charge the
connected device at the same time. This switcher supports 3D signal
up to 2.25Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio
and other features dened by HDMI v1.3 specications, on all of its
5 input ports. The operation of source selection can be done easily
through on-panel buttons, IR remote control, or RS-232 protocol.
2. APPLICATIONS
• Smart Home Entertainment
• Show room or meeting room
• Smart AV Installation
3. PACKAGE CONTENTS
•5 by 1 HDMI with MHL switcher
•5V DC power supply adaptor
•Remote Control CR-113 with battery
•Operation Manual
•IR Extender cable
•MHL to HDMI cable
4. SYSTEM REQUIREMENTS
•HDMI sources such as PS3 or Blu-ray players for 1 to 5 ports
HDMI type A inputs and the 5th port can connect to MHL
mobile device with a MHL to HDMI cable.
•Output HDMI type A port connect to the HDMI display/TV.
Input sources with HDMI/DVIconnector or MHL device.
2
5. FEATURES
• Supports InstaPort Technology™
• Supports ve HDMI type A with one MHL to HDMI port
• Supports one HDMI type A output
• Supports video resolution up to 1080p@60Hz
• Support HDMI specication features, including data rates up to
2.25Gbps, 12-bit Deep color
• Supports 3D
• MHL port support 1080p@30Hz or 1080i@60Hz
• MHL port can charge the connected mobile device
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
12 3
5X1 HDMI/MHL FAST SWITCHER CFSW-51MHL
54321
POWER
INPUT
1Receiver
2Input selection buttons with LED:
Press input button to select input source, the Blue LED will illuminate
accordingly.
3Power button with LED:
Press this button to switch on the device or press it again to set it
to standby mode. When the system is switch to on the green LED
will illuminate.
4
6.2 Rear Panel
1
2 3 4 5
DC 5V
54321
MHL/HDMI
HDMI IN
HDMI OUT
RS232
IR IN
1RS232:
This slot is to connect to a PC or control system with D-Sub 9pin
cable for RS-232 control. For detail RS-232 commands please refers
to section 9.
2IR IN:
Connect to IR extender cable included in the package for
receiving IR remote signal of this device.
3HDMI OUT:
Connect to LCD TV or HD monitor with HDMI cable.
4HDMI IN:
Connect the equipments to the HDMI input ports 1 to 5 such as
DVD player, Blu-Ray, PS3 and other sources with HDMI cables. The
5th can be connected to HDMI/MHL mobile device.
Note: When MHL device is connected it will automatically be
charged, if the MHL device is switched off at the connection, it will
automatically be turned on.
5Power:
Plug the DC 5V power supply into the system and connect the
adaptor to AC wall outlet.
5
7. REMOTE CONTROL
1Power button:
Press this button to switch on
or turn the device to standby
mode.
2HDMI 1~5:
These buttons are the input
HDMI hot switching keys for
selecting HDMI sources. Note:
for this model only 1~5 is
active.
3Mute / Vol + / Vol -:
These buttons are to control
the input source including DVD
or PS3 or Blu-ray player or even
MHL mobile’s volume by set it
to mute or add up or down the
sound.
4:
These buttons are to control the input source including DVD or
PS3 or Blu-ray or even MHL mobile’s play list by set it to backward,
play/pause and forward.
Note: In order for continuing control on the MHL mobile device
thescreen time out setting must set free.
5Input:
Press this button sequentially to select input source from 1 ~ 5.
6Menu:
Press this button to enter into the input source including DVD or PS3
or Blu-ray or even MHL mobile’s root menu.
7▲▼◄► & Enter:
These buttons are to control the input source including DVD or PS3
or Blu-ray or even MHL mobile’s OSD selection.
Note: In order to activate the functions 3~6, input source device
must compliance with the following
1. HDMI control (CEC/Via Link…etc) must switch on.
2. Must accept CEC command
8Exit:
Press this button to exit the selection .
Menu
Input
HDMI 1 HDMI 2 HDMI 3
HDMI 6
HDMI 4 HDMI 5
Vol +
HDMI 7 HDMI 8
Mute
Vol -
Exit
Enter
CR-113
1
2
4
5
7
3
6
8
Otros manuales para CFSW-51MHL
2
Tabla de contenidos
Otros manuales de Cambiar de CYP
CYP
CYP EL-41S-4K22 Manual de usuario
CYP
CYP PU-444HBTE Manual de usuario
CYP
CYP EL-41WX Manual de usuario
CYP
CYP MED-AS60 Manual de usuario
CYP
CYP CPLUS-31PS Manual de usuario
CYP
CYP CH-1539TXPLPD Manual de usuario
CYP
CYP CLUX-21N Manual de usuario
CYP
CYP CPLUS-401V Manual de usuario
CYP
CYP EL-C41C Manual de usuario
CYP
CYP CDPS-41SQ Manual de usuario
CYP
CYP EL-7500V Manual de usuario
CYP
CYP CH-2537TXWPUS Manual de instalación
CYP
CYP EL-C81C Manual de usuario
CYP
CYP EL-21SY Manual de usuario
CYP
CYP CDPS-U42HPIP Manual de instalación
CYP
CYP CPLUS-V3H1H-TB Manual de usuario
CYP
CYP EL-31SY Manual de usuario
CYP
CYP AU-D21 Manual de usuario
CYP
CYP CLUX-4S2 Manual de usuario
CYP
CYP EL-41SY Manual de usuario
