CYP PUV-44XPL-AVLC Manual de usuario
OPERATION MANUAL
PUV-44XPL-AVLC
4x4 HDMI HDBaseT™ LITE Matrix with AVLC
& Audio De-embedding (4K, HDCP2.2, PoH, 60m)
inc. 4x PUV-1710LRX-AVLC Receiver
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 16/05/2019 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................7
4. System Requirements ...........................7
5. Features..................................................8
6. Operation Controls and Functions.......9
6.1 Front Panel................................................... 9
6.2 Rear Panel...................................................11
6.3 Remote Control........................................13
6.4 IR Cable Pinouts .......................................14
6.5 RS-232 Pinout and Defaults.................14
6.6 OLED Menu................................................15
6.7 WebGUI Control .......................................19
6.8 Telnet Control............................................30
6.9 RS-232 and Telnet Commands............31
7. Connection Diagram .......................... 46
8. Specifications...................................... 47
8.1 Technical Specifications ........................47
8.2 Video Specifications................................48
8.3 Audio Specifications...............................50
8.4 Cable Specifications ...............................51
8.5 HDBaseT Features....................................52
9. Acronyms............................................. 53
6
1. INTRODUCTION
This 4×4 HDMI over HDBaseT Matrix with AVLC supports routing and
transmission of video (resolutions up to 4K@60Hz w/ HDMI 2.0 & HDCP
2.2) and audio while providing flexible control via IR, RS-232, Telnet
or WebGUI. As many as four HD sources may be routed to any of four
destinations via single runs of cable up to a distance of 70m. Despite
HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources,
up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12 bit sources
with HDR, are able to be processed and extended by the use of AVLC
(Adaptive Visually Lossless Compression) when needed. 3D video is also
supported when compatible sources and displays are connected.
This unit supports passing up to 8 channel LPCM digital audio as well as
Bitstream and HD Bitstream audio formats. Additionally, four analogue
stereo audio outputs are available to provide breakout audio from the
associated HDBaseT output (LPCM 2.0 sources only).
The included PoH (Power over HDBaseT) functionality can supply remote
power to compatible HDBaseT Receivers, providing greater flexibility in
your installations. Control is via front panel buttons with an OLED menu,
WebGUI, Telnet, RS-232 or IR remote.
2. APPLICATIONS
Full audio/video matrix systems
Residential AV matrix installations
Commercial AV matrix installations
Security systems
University lecture hall systems
Retail installation system
7
3. PACKAGE CONTENTS
1× 4×4 4K UHD+ HDMI over HDBaseT Matrix with AVLC
1× 24V/6.25A DC Power Adapter
1× Power Cord
2× IR Extender Cable
2× IR Blaster Cable
1× Remote Control (CR-163)
1×Shockproof Feet (Set of 4)
1× Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media players, video game consoles
or set-top boxes.
HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
HDBaseT Receivers equipped with AVLC (Adaptive Visually Lossless
Compression) and PoH (PD) support is strongly recommended.
The use of Premium High Speed HDMI cables, and industry standard
Cat.6, Cat.6a or Cat.7, is highly recommended.
8
5. FEATURES
HDMI with HDR & 4K@60Hz support, DVI 1.0 compatible
HDCP 1.x and HDCP 2.2 compliant
Routes four HDMI sources to four displays using four HDBaseT outputs
Supports up to 4K UHD (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input and
output
Supports deep colour input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) bypass (Output
requires AVLC receiver)
Integrated AVLC (Adaptive Visually Lossless Compression) activates
when the bandwidth requirements of the source are beyond 10.2Gbps
allowing for support of sources up to 18Gbps with no loss of visual
quality via compatible HDBaseT Receivers
Supports automatic conversion of 4K@50/60Hz (4:4:4) sources to
4K@50/60Hz (4:2:0) or 1080p50/60 for non-AVLC HDBaseT receivers or
if a connected display can’t support the original resolution.
Note: 1080p conversion is only available on outputs A & C.
Supported HDBaseT feature set: HD Video & Audio, PoH (PSE), and
Control (Bi-directional IR pass through)
4K signals can be transmitted up to 35m via Cat.5e/6 and up to 40m via
Cat.6a/7
Supports pass-through of these standard digital audio formats via
HDBaseT: LPCM (up to 8 channels), Bitstream, and HD Bitstream
High quality Digital to Analogue Conversion (DAC) of LPCM 2.0 audio
sources for local audio breakout.
Supports generation of OSD banner information
Advanced internal and external EDID management with 4 sets of
congurable EDID settings
1U rack mounted design
Control via front panel controls, Ethernet (Telnet & WebGUI), RS-232, &
IR remote
9
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OUT
POWER
LOCK
1 2 3 4
98710ENTER
PRESET
MENU
/CANCEL
IN
5
6
PUV-44XPL-AVLC
1 2 3 4 6 7 8 10
5 9
1POWER Button: Press this button to power the unit on or place it into
stand-by mode.
Note: Network functionality and PoH remains active when the unit is in
stand-by mode.
2POWER LED: This LED will illuminate green to indicate the unit is on
and receiving power. When the unit is in stand-by mode the LED will
illuminate red.
3IR Window: Accepts IR signals from the included IR remote for control
of this unit only.
4OUTPUT A~D/INPUT 1~4/NUMBER 1~10 Buttons: Press the “OUT”
button to enter output selection mode. Next, press the output keys
(A~D) of the outputs you wish to route a source to (they will flash to
indicate selection). Next, press the “IN” key followed by the input (1~4)
you wish to route to the selected outputs. Finally, press “ENTER” to
confirm your selection and execute the routing change.
For example, if you wish to display input 1 on outputs A~D then the
following sequence of button presses should be performed: OUT →A,
B, C, D →IN →1 →ENTER
Note: When directly entering Ethernet address information into the unit
all 10 buttons are used to represent the numbers from 0 to 9 (button 10 =
0) to make number entry more streamlined.
5MENU/CANCEL Button: Press to enter the OLED menu, or to back out
from menu items.
Note: For a description of the OLED menu tree, please refer to section 6.6.
6ENTER Button: Press to confirm a selection or to go deeper into a
menu item.
10
7+/IN Button: Inside the OLED menu, this button moves you up within
the menu tree. Otherwise, in routing mode, this button allows you to
make your input source selection.
-/OUT Button: Inside the OLED menu, this button moves you down
within the menu tree. Otherwise, this button activates routing mode
and allows you to begin your output destination selections
8PRESET Button: Press this button to recall saved presets. Press the
“Preset” button followed by a number button and the “Enter” button
to recall the stored preset assigned to that number. A maximum of 8
presets can be stored in the unit. Presets are created and stored via
the WebGUI.
Note: Please refer to section 6.7.1 for advanced preset settings.
9LOCK Button: Press this button to lock all buttons on the front panel,
or press and hold it for 3 seconds to unlock a locked front panel.
Note: The OLED will display an “L” in the upper right corner to indicate the
front panel is locked.
10 OLED Window: Displays the unit’s menu, settings and information.
Otros manuales para PUV-44XPL-AVLC
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Conmutador de matriz de CYP
CYP
CYP OR-42SA-4K22 Manual de usuario
CYP
CYP OR-HD88S Manual de usuario
CYP
CYP Elpro Video Labs CDPS-UC4H4HFS Manual de usuario
CYP
CYP PU-8H8HBTPL-4K22 Manual de usuario
CYP
CYP CPLUS-662CVAL Manual de usuario
CYP
CYP CMSDI-1616S Manual de usuario
CYP
CYP CMPRO-4H4H Manual de usuario
CYP
CYP OR-IR44 Manual de usuario
CYP
CYP CPLUS-V4H4H Manual de usuario
CYP
CYP CPLUS-V32USBC Manual de usuario
CYP
CYP OR-HD24S Manual de usuario
CYP
CYP OR-HD42S Manual de usuario
CYP
CYP CMSI-4H4CV Manual de usuario
CYP
CYP PU-16HBT Manual de usuario
CYP
CYP nT14AX16 Manual de usuario
CYP
CYP OR-44VWC Manual de usuario
CYP
CYP Elpro Video Labs CDPS-UC4H4HFS Manual de instalación
CYP
CYP PUV-44XPL-4K22-KIT Manual de usuario
CYP
CYP CMSI-8H8CV Manual de usuario
CYP
CYP CMPRO-4H4H Manual de usuario
