CYP PU-232 Manual de usuario

OPERATION MANUAL

PU-232

RS-232 Control Over CAT5/6

Extender Set

Table of Contents

1. Introduction 1

2. Features 1

3. Package Contents 1

4. Operation Controls and Functions 2

4.1 Front Panel Diagram 2

4.2 Rear Panel Diagram 3

5. Connection Diagram 4

6. Specications 4

Page 1

1. Introduction

The CAT5/6 RS-232 extender is an affordable, hardware-based solution providing

control of any RS-232 protocol device. This transmitter and receiver set will extend

the control of RS-232 for over 250 meters. The RS-232 extender also provides full

duplex transmission and hardware handshake signals, with no need for any set

up or conguration.

2. Features

• Extends any RS-232 compliant device up to 250 metres from the source to

display.

• Requires only one CAT5/6 cable.

• Perfect for digital signage applications.

• Baud Rate: 110~921600. Data bit: 8bit.

• Simple installation and operation.

3. Package Contents

• PU-232 Transmitter.

• PU-232 Receiver.

• 5V DC power adaptor.

• Operation Manual.

Page 2

4. Operation Controls and Functions

4.1 Front Panel

1. Connect with CAT 5 cable up to 250M and link to Receiver side’s CAT 5

connector.

2. Connect the 5V DC power adaptor into the unit and plug the adaptor to AC wall

outlet.

Note:

1. Only an adaptor is needed for both Transmitter and Receiver.

3. Connect to source device with DB 9 male to female cable for receiving and

communicating with PC/Laptop.

12 3

CAT5

DC 5V

RS-232 IN

Page 3

4.2 Rear Panel

1. Connect to PC/laptop‘s main control system with DB 9 female to male cable for

sending protocol to source device.

2. Connect from Transmitter side the CAT 5 cable.

3. Connect the 5V DC power adaptor.

Note:

1. Only one adaptor is needed for both Transmitter and Receiver however, if no

image display then two adaptor will be required.

RS-232 OUT CAT5

DC 5V

1 2 3

Page 4

5. Connection Diagram

6. Specications

Input Port 1 x RS-232 D-Sub-9 female

1 x CAT 5/6

Output Port 1 x RS-232 D-Sub-9 male

1 x CAT 5/6

Power Supply 2 x 5V/1A DC (US/EU standards, CE/FCC/UL

certied)

Dimensions (mm) 80(W) x 72(D) x 30(H)

Weight (g) 260

Chassis Material Aluminium

Silk Skin Colour Black

Operating Temperature Operating from 0°C ~ 40°C

Notes:

www.cypeurope.com

Otros manuales para PU-232

1

Tabla de contenidos

Otros manuales de Extensor de CYP

Manuales populares de Extensor de otras marcas

SY

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario