CYP PU-304-KIT Manual de usuario
PU-304-KIT
Digital Audio over CAT6 Extender TXRX Set
OPERATIONS MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 15/02/2012 Preliminary Release
5
CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................6
5. Operation Controls and Functions .......7
5.1 Transmitter Front and Rear Panels ....... 7
5.2 Receiver Front and Rear Panels ............ 8
5.2 Receiver Front and Rear Panels ............ 9
5.4 RJ45 Pin Assignment ................................ 9
6. Connection Diagram .......................... 10
7. Specications ...................................... 11
8. Acronyms ............................................. 11
6
1. INTRODUCTION
The PU-304-KIT is designed to send digital audio signals over 150m. This
device supports both Coaxial and Optical signals and can transmit these
signals up to 150m. The PU-304-KIT can be powered using a USB cable or
the supplied PSU adaptor for added exibility in a compact design. Digital
SPDIF signals are supported up to a sample rate of 96Khz, and support for
Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby
Digital Plus), also provided.
2. APPLICATIONS
Transmit dual SPDIF (coaxial and optical) over single CAT cable..
3. PACKAGE CONTENTS
Digital Audio Transmitter over single CAT6 cable
Digital Audio Receiver over single CAT6 cable
5 V/1 A DC power adaptor
Operation manual
4. SYSTEM REQUIREMENTS
Coaxial/Optical audio input source and amplier or speaker output and
single CAT6 cable for connecting transmitter and receiver.
5. FEATURES
Supports Coaxial or Optical digital audio S/PDIF signal
Supports stereo and multi-channel (7.1, DTS, Dolby Digital etc.) digital
audio
Supports industry standard Category 5/5e/6 cable
Digital audio S/PDIF performance sampling rate 96 kHz
Supports single Coaxial input to Coaxial signal output
Supports single Optical input to Optical signal output
7
5. OPERATION CONTROLS AND FUNCTIONS
5.1 Transmitter Front and Rear Panels
Optical
In
Coaxial
In
USB
5V CAT6 Out
DC 5V
Optical
In
Coaxial
In
USB
5V CAT6 Out
DC 5V
1 2 3 4 5
1 Coaxial In
Connect to source audio equipment such as DVD or Blu-ray players
with a Coaxial digital audio output.
2 Optical In
Connect to source audio equipment such as DVD or Blu-ray players
with an Optical digital audio output.
3 DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet. Note: only one unit out of the two needs to be powered.
4 USB 5V
Connect with a USB cable for power supply from computer or
notebook.
5 CAT6 Out
Connect to the receiver unit with a single CAT6 cable.
8
5.2 Receiver Front and Rear Panels
DC 5V
Optical
Out
Coaxial
Out
USB
5V CAT6 In DC 5V
Optical
Out
Coaxial
Out
USB
5V CAT6 In
1 2 3 4 5
1
USB 5V
Connect with a USB cable for power supply from computer or
notebook.
2
CAT6 In
Connect to the receiver unit with a single CAT6 cable.
3
Coaxial OUT
Connect to an amplier or active speakers with coaxial input.
4
Optical Out
Connect to an amplier or active speakers with optical input.
5
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet. Note: only one unit out of the two needs to be powered.
9
5.2 Receiver Front and Rear Panels
DC 5V
Optical
Out
Coaxial
Out
USB
5V CAT6 In
Optical
In
Coaxial
In
USB
5V CAT6 Out
DC 5V
1
1
Power LED
The blue LED will light when the device is powered.
5.4 RJ45 Pin Assignment
TRANSMITTER
Cat5/5e/6
150m
RECEIVER
Pin Denition Pin Denition
1 Signal A 1 Signal A
2 Signal B 2 Signal B
3 Signal C 3 Signal C
4 GND 4 GND
5 GND 5 GND
6 Signal D 6 Signal D
7 DC5V 7 DC5V
8 DC5V 8 DC5V
10
6. CONNECTION DIAGRAM
Transmitter
Receiver
Amplier
Power Supply
Optical Connection Coaxial Connection
CD Player DVD/Blu-ray Player
Optical Connection Coaxial Connection
Tabla de contenidos
Otros manuales de Extensor de CYP
CYP
CYP PUV-1230PL-RX Manual de usuario
CYP
CYP PU-1107-KIT Manual de usuario
CYP
CYP PU-1106-KIT Manual de usuario
CYP
CYP SDV-FTX Manual de usuario
CYP
CYP CH-506TXPLRXPL Manual de usuario
CYP
CYP CH-506TX Manual de usuario
CYP
CYP PUV-1510RX Manual de usuario
CYP
CYP PUV-1250PL-TX Manual de usuario
CYP
CYP IR-EXT3 Manual de usuario
CYP
CYP CDVI-1109TXC Manual de usuario
CYP
CYP PRO-F12TX Manual de usuario
CYP
CYP IP-7000TXWP Manual de usuario
CYP
CYP CH-507TXWPUS Manual de usuario
CYP
CYP CH-1109TX Manual de usuario
CYP
CYP CH-1107EX Manual de usuario
CYP
CYP PU-106 Manual de usuario
CYP
CYP CIR-03 Manual de usuario
CYP
CYP CH-514RXL Manual de usuario
CYP
CYP SDV-FTX Manual de usuario
CYP
CYP CH-110TX Manual de usuario
