CYP QU-28S-4K22 Manual de usuario

QU-28S-4K22

2 to 8 HDMI Distribution Amplifier

(4K, HDCP2.2, HDMI2.0)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 24/05/1018 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 OSD Menu ..................................................10

6.4 RS-232 Control..........................................20

6.5 RS-232 Commands..................................21

6.6 EDID Management..................................32

7. Connection Diagram .......................... 36

8. Specifications...................................... 37

8.1 Technical Specifications ........................37

8.2 Video Specifications................................38

9. Acronyms............................................. 43

1. INTRODUCTION

This 4K UHD Switching Splitter with HDCP 2.2 is an advanced solution

providing high performance audio and video support including HDR

and other features defined by the HDMI 2.0a specification. 4K UHD HDMI

video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-

bit sources with HDR, are able to be passed along to the 8 outputs. Pass-

through of multiple digital audio formats such as LPCM 7.1, Bitstream and

advanced HD Bitstream with audio sampling rates up to 192kHz are also

supported. An independent HDCP management engine for each output

ensures stable HDCP performance.

This splitter also includes a special“Group Mode” which allows the unit

to function as two independent 1×4 splitters. When Group Mode is

enabled, each of the 2 HDMI inputs are routed to their own discrete set of

4 outputs.

When a mixture of displays with different specifications are connected,

each output can be configured to scale 4K to 1080p or apply colour space

conversion (4:4:4 to 4:2:0), as appropriate. Support for the CEC “active

source” command to periodically reset input selection on CEC-compatible

connected displays is also included. This unit provides an intuitive set of

front panel controls with an OSD as well as RS-232 control options.

2. APPLICATIONS

Classroom and Lecture Hall Presentations

Showrooms and Demo Rooms

Hotel Lobby information Displays

Public Commercial Displays

3. PACKAGE CONTENTS

1×HDMI Splitter

1×5V/3A DC Power Adapter

1×Terminal Block (3-Pin) to RS-232 (9-Pin D-Sub) Cable

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as media players, video game consoles

or set-top boxes.

HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

The use of “Premium High Speed HDMI”cables is highly recommended.

5. FEATURES

HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

HDCP 2.2 and HDCP 1.x compliant

Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video

signals

8 output HDMI splitter with 2 selectable inputs and automatic input

switching support

Special “Group Mode” allows the unit to function as two independent

1×4 splitters in a single box

Supports current 10-bit and 12-bit HDR (High Dynamic Range) formats

Supports pass-through of LPCM 7.1, Bitstream and advanced HD

Bitstream audio formats

Per-output, selectable, 4K to 1080p down-scaling/colour space

conversion (4:4:4 to 4:2:0)

Independent HDCP management engine for each output ensures

stable performance

Supports eight internal EDIDs, eight external EDIDs copied from

connected devices, and two user provided EDIDs

Support for the CEC “active source” command to periodically reset

input selection on CEC-compatible connected displays

Controllable via front-panel buttons with OSD and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

GROUP

GROUPIN 2IN 1

MENU ENTER+

IN 1

GROUP 1

OUT AOUT BOUT COUT DQU-28S-4K22

21 3 4 5 76

1IN LEDs: The behavior of these LEDs depend on if Group Mode has

been enabled or not.

AGroup Mode Off

IN 1~2: The illuminated LED indicates which source is currently

selected.

GROUP: This LED will remain off.

BGroup Mode On

IN 1~2: These LEDs will illuminate to indicate that a live source has

been detected on the associated input port. If no source is detected

the LED will remain off.

GROUP: This LED will illuminate.

Note: When the front panel is locked, all 3 LEDs will blink after any button

press.

2MENU: Press to enter the OSD menu, or to back out from menu items.

Note: Press and hold the “MENU” button for 3 seconds while connecting

the power supply to reset all settings to the factory defaults.

3− & IN 1: Press to move down or adjust selections within OSD menus.

When not in the OSD menu, press this button to switch to Input 1.

Note: Pressing “MENU” and “−” together will force Input 1 to use the

Internal “FHD, 2CH” EDID.

4+ & IN 2: Press to move up or adjust selections within OSD menus.

When not in the OSD menu, press this button to switch to Input 2.

Note: Pressing “MENU” and “+” together will force Input 2 to use the

Internal “FHD, 2CH” EDID.

5ENTER & GROUP: Press to confirm a selection within the OSD or to

go deeper into a menu item. When not in the OSD menu, press this

button to toggle Group Mode on and off.

Note: Press and hold the “MENU” and “ENTER” buttons together for 3

seconds to lock or unlock the front panel.

6IN 1: Connect to HDMI source equipment such as a media player,

game console or set-top box.

7OUT A~D: Connect to HDMI TVs, monitors or amplifiers for digital

video and audio output.

Note: When Group Mode is active, these outputs will display Input 1.

6.2 Rear Panel

SERVICE RS-232

POWER

DC 5V

GROUP 2

IN 2

OUT HOUT GOUT FOUT E

1 2 3 4 5

1OUT E~H: Connect to HDMI TVs, monitors or amplifiers for digital

video and audio output.

Note: When Group Mode is active, these outputs will display Input 2.

2IN 2: Connect to HDMI source equipment such as a media player,

game console or set-top box.

3SERVICE: This port is reserved for firmware update use only.

4RS-232: Connect directly to a PC, laptop or other serial control device

with a 3-pin adapter cable to send RS-232 commands to control the

unit.

5POWER LED & DC 5V: Plug the 5V DC power adapter into this port

and connect it to an AC wall outlet for power. The LED will illuminate

to indicate the unit is on and receiving power.

6.3 OSD Menu

All primary functions of this unit can be controlled by using the OSD

(On Screen Display) which is activated by pressing the Menu button on

the front of the unit. Use the + (PLUS), − (MINUS), and ENTER buttons to

navigate the OSD menu. Press the Menu button to back out from any

menu item and then press it again to close the menu.

MAIN MENU

Input Switch

Input Information

Output 4K Converter

Output Information

EDID Control

HDCP Control

CEC Control

Remote Control

OSD Setting

System Setting

The individual functions of the OSD will be introduced in the following

section. Items marked in BOLD are the factory default settings.

MAIN MENU LEVEL 2 LEVEL 3

Input Switch Switch to INPUT 1

Input 2

Auto Switch On

OFF

Group Mode On

OFF

1Switch to: Select the input to display when Group Mode is disabled.

Note: Selecting an Input when Group Mode is turned on will disable

Group Mode.

Tabla de contenidos

Otros manuales de Amplificador de CYP

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario