CYP CPRO-UHH Manual de usuario
CPRO-UHH
UHD 4K2K HDMI to HDMI Enhancer
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.0 January 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 15/09/14 Preliminary Release
RDV2 09/12/14 Remove Power Supply
RDV3 13/03/15 Cable Distance
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Panel Description................................... 3
6.1 Panel Description .............................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
8.1 Timing Table ......................................6
1
1. INTRODUCTION
The UHD 4K2K HDMI to HDMI Enhancer is the most advanced solution
for HDMI signal extension or cascade. It does amplies signal and
equalization to provide high performance I/O of audio and video
through HDMI cable for distance up to 10 meters at 4K2K@60Hz(Only
YUV_420) and can cascade up to 5 layers. Capable of receiving and
transmitting 3Gbps bandwidth rate with CDR (Clock Data Recovery)
ensure not data loss. This unit can be powered by HDMI output of
suitability equipped source equipment (eliminating the need for a
power supply) or if the HDMI source does not providing a suitable
power supply an HDMI Power Inserter can be used.
2. APPLICATIONS
• Installation usage
• HDMI signal cascading
• HDMI cable/system extension
3. PACKAGE CONTENTS
• UHD 4K2K HDMI Enhancer
• Operational Manual
4. SYSTEM REQUIREMENTS
Input source equipment and output extend HDMI cable with display/
monitor.
2
5. FEATURES
• HDCP 2.2 and DVI 1.1 Compliant
• Built-in TMDS equalization and CDR (Clock Rate Recovery) for
extended HDMI cable distance
• Supports resolution up to 4K2K@50/60 & YUV_420 and 21:9
• Supports HDMI Input/Output cable distance up to 10m at
4K2K@50/60 & YUV_420
• Cascading HDMI signal up to 5 layers
• Requires HDMI source devices to output power to the unit over
HDMI cable
• Compact design
Note:
1.For devices that do not support power over cable and HDMI
Power Inserter can be used in-line between the source
equipment and the HDMI Enhancer.
2.HDMI cable tested with 24AWG, different source and different cable
may cause in different result on cable distance and cascading
layers, it is suggested to use power inserter in between the rst and
the second HDMI Enhencer and on the last layer or the 5th layer
another power inserter before connect to display/HDMI device.
3
6. PANEL DESCRIPTION
6.1 Panel Description
IN OUT
EQ • CDR
Ultra HD
1 2
1HDMI IN
Connect the HDMI input to the HDMI output of your source
equipment such as Blu-ray player or HDMI Switcher/Splitter/Matrix.
The unit can be directly powered from HDMI source equipment
that provides power through the HDMI cable or by an HDMI Power
Inserter connected in between the source and the unit.
2HDMI OUT
Connect the HDMI output to the HDMI input of an HDMI transmitter
or with extend HDMI cable up to 10m connected from TV/display.
4
7. CONNECTION DIAGRAM
HDMI OUT
HDMI IN
HDMI OUT 1 HDMI OUT 2
HDMI OUT
HDMI IN
IN OUT
EQ • CDR
Ultra HD
IN OUT
EQ • CDR
Ultra HD
AV Receiver
HDTV
HDMI Cable
HDMI Cable
(Up to 10m)
HDMI Cable
(Up to 10m)
HDMI Cable
(Up to 10m)
HDMI Source
(Blu-ray Player
HDMI Cable
(Up to 10m)
HDMI Cable (2m)
HDMI Cable (2m)
HDTV
HDMI Power
Inserter
HDMI Splitter
(Optional)
HDMI Enhancer
(Optional)
HDMI Enhancer
HDMI Power
Inserter
(Optional)
5
8. SPECIFICATIONS
Video Bandwidth 340MHz / 10.2Gbps
Input Port 1 x HDMI
Output port 1 x HDMI
Resolution HD: 480i~4K2K@24/25/30 & 4K2K@50/60
YUV_420
PC: VGA ~ WUXGA (RB)
Cable Distance 10m@4K2K
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Dimensions 65mm (W) x 24mm (D) x 9.5mm (H)
Weight 14 g
Chassis Material Plastic
Silkscreen Color Black
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 0.75w (Max)
Otros manuales para CPRO-UHH
1
Tabla de contenidos
Otros manuales de Amplificador de CYP
CYP
CYP CMPRO-4H2H Manual de usuario
CYP
CYP QU-10-4K22 Manual de usuario
CYP
CYP PU-Q1C4H Manual de usuario
CYP
CYP PRO-3GSDI44 Manual de usuario
CYP
CYP QU-12S Manual de usuario
CYP
CYP QU-DP14 Manual de usuario
CYP
CYP CHDD-3 Manual de usuario
CYP
CYP QU-DP13EX Manual de usuario
CYP
CYP QU-18S Manual de usuario
CYP
CYP QU-18S Manual de usuario
CYP
CYP AU-A200 Manual de usuario
CYP
CYP QU-12D Manual de usuario
CYP
CYP QU-14S Manual de usuario
CYP
CYP QU-210S v1.3 Manual de usuario
CYP
CYP QU-8-4K22 Manual de usuario
CYP
CYP CHDMI-18C Manual de usuario
CYP
CYP QU-210S Manual de usuario
CYP
CYP DCT-23 Manual de usuario
CYP
CYP DCT-23 Manual de usuario
CYP
CYP CHDMI14 Manual de usuario
