Pyle PFMRA350BW Manual de usuario
Features:
• 2-Channel Audio Amplier
• Rugged & Durable Marine Grade Construction
• Water Resistant & Weatherproof Design
• Bluetooth Receiver for Wireless Music Streaming Ability
• USB Flash & SD Memory Card Readers
• MP3 Digital Audio File Compatibility
• LCD Digital Display Screen
• RCA (L/R) Audio Connectors
• Spring-Loaded Speaker Terminals
• Connect & Stream Audio from External Devices
• Heavy Duty Aluminum Alloy Heatsink
• Side Panel Button Control Center
• Volume, Bass, Treble Rotary Controls
• Built-in Thermal, Overload & Speaker Short Protection
• Includes Wall Power Adapter
• Power ON/OFF Switch
BT Wireless Connectivity:
• Works with All of Today's Latest Devices
• (Laptops, Computers, Smartphones, Tablets, etc.)
• Smart Auto Connect Pairing Ability
• Bluetooth Version: 2.1
• Bluetooth Network Name: Pyle
• Wireless Range: About 50' ft.
Technical Specs:
• MAX Power: 200 Watt ( I 00W x 2)
• Amplier Type: Class-D Circuit
• Marine Grade Rating: IP-41
• Impedance: 4 Ohm
• Frequency Response : 10 - 40kHz
• Channel Separation : > 65dB
• T.H.D.: <1.0%
• S/N Ratio : > 95dB
• Maximum USB Flash Support: 32 GB
• Digital Audio File Support: MP3, WMA, WAV
• Power: 1 I 0/220V (DC 12.5V Power Adapter)
• Dimensions (LxWx H): 10.2" x 8.6" x 2.1"
• Sold as: I
PFMRA340BB
PFMRA350BW
Weather Resistant Audio Amp System
with MP3/USB/SD Readers, 200 Watt
USER MANUAL
Marine Amplier
1. SD Card input for MP3 player
2. USB input for MP3 player
3. Treble Volume Control
4. Bass Volume Control
5. Master Volume Control
6. Display screen
7. Input select
8. Previous song
9. PIay/Pause function
10. Next song
11. Amplier output jack
12. Power plug
13. Power ON/OFF Switch
14. Power Adapter jack(1 2.5V/2.5A)
15. Audio Input(L/R)
BLUETOOTH OPERATION INSTRUCTION:
External devices which have a built-in Bluetooth feature can be
connected to this amplier wirelessly to play through the
amplier's speakers. If your amp is connected to speakers, you will
hear audible tones which will help for connecting.
1. At rst be sure that the amplier is powered on, and turn the
volume to low.
2. Press "MODE" button on the front panel, the unit is automatically
ready to pair with your devices when you here two "Tone".
3. Turn on the Bluetooth of your external device.
4. Search for available Bluetooth devices and make sure to be
within range of your amp, and wait for your device to select
"PYLE " on the pairing devices lists of Bluetooth networks.
5. You can now play music on your external device through the
amplier.
Notes: This Marine Amplier has a bluetooth prioritized
function, unit will auto enter BT mode when your external
devices are in the wireless range.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
FCC Statement
Este manual sirve para los siguientes modelos
1
Otros manuales de Amplificador de Pyle
Pyle
Pyle PMXAKB2000 Manual de usuario
Pyle
Pyle PT8000CH Manual de usuario
Pyle
Pyle PDA77BU Manual de usuario
Pyle
Pyle PLMRMP3A Manual de usuario
Pyle
Pyle PTA66BT Manual de usuario
Pyle
Pyle PWMA120 Manual de usuario
Pyle
Pyle PVC8U Manual de usuario
Pyle
Pyle PDA69BU Manual de usuario
Pyle
Pyle PT4601AIU Manual de usuario
Pyle
Pyle PLMRC500X1 Manual de usuario
Pyle
Pyle PCM60A Manual de usuario
Pyle
Pyle P3201BT Manual de usuario
Pyle
Pyle Mini Blue PFA330BT Manual de usuario
Pyle
Pyle PT8000CH Manual de usuario
Pyle
Pyle PFA100 Manual de usuario
Pyle
Pyle PWMA80UFM Manual de usuario
Pyle
Pyle PT506BT Manual de usuario
Pyle
Pyle PT6060CHAE Manual de usuario
Pyle
Pyle PLML51DB Manual de usuario
Pyle
Pyle PT530A Manual de usuario
