Concept Pro VCP553 Manual de usuario

VCP553

Colour Mono Zoom Camera

USER MANUAL

1. This installation should be made by a qualified service person and should

abide to all local codes.

2. Do not disassemble the camera - this is to prevent electronic shock

and/or malfunction. Do not loosen any screws on the camera body.

3. Do not touch the front glass directly. If necessary, use a soft cloth to wipe off

dust or debris.

4. Avoid installation on surfaces subjected to frequent vibration or shocks.

5. Do not operate the camera beyond its temperature range or power source

ratings.

6. Should any damage or suspected damage occur, shutdown the power

source, unplug and contact your service provider.

7. Do not install the camera under unstable lighting conditions. Severe

lighting change or flicker can cause the camera to work improperly.

8. Never use the camera close to a gas or oil leak.

9. Do not drop the camera or subject the unit to physical shocks.

10. Never keep the camera facing directly to strong light.

11. Do not install near devices which emit a strong electro-magnetic field.

12. Unplug the camera from the power source before maintenance.

13. Use a soft cloth only for cleaning.

14. If the camera may be exposed to weather conditions, dust particles or

moisture install in an IP rated housing suitable to the conditions.

CAUTION

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY

INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.

Remark: Changes or modifications not expressly approved by the manufacturer can

cause the camera to be damaged and become inoperable. This may invalidate the

user warranty.

1. This installation should be made by a qualified service person and should

abide to all local codes.

2. Do not disassemble the camera - this is to prevent electronic shock

and/or malfunction. Do not loosen any screws on the camera body.

3. Do not touch the front glass directly. If necessary, use a soft cloth to wipe off

dust or debris.

4. Avoid installation on surfaces subjected to frequent vibration or shocks.

5. Do not operate the camera beyond its temperature range or power source

ratings.

6. Should any damage or suspected damage occur, shutdown the power

source, unplug and contact your service provider.

7. Do not install the camera under unstable lighting conditions. Severe

lighting change or flicker can cause the camera to work improperly.

8. Never use the camera close to a gas or oil leak.

9. Do not drop the camera or subject the unit to physical shocks.

10. Never keep the camera facing directly to strong light.

11. Do not install near devices which emit a strong electro-magnetic field.

12. Unplug the camera from the power source before maintenance.

13. Use a soft cloth only for cleaning.

14. If the camera may be exposed to weather conditions, dust particles or

moisture install in an IP rated housing suitable to the conditions.

INSTALLATION

IMPORTANT: ENSURE ALL CAUTIONARY PROCEDURES ARE OBSERVED

DURING INSTALLATION.

It is recommended the VCP553 is tested during the most demanding

environmental conditions such as low light or bright sunlight to ensure

continuity of effective CCTV monitoring.

Remove the camera unit carefully from the box, reserving the accessory

contents in a safe place.

Point the Camera towards the intended area to be monitored.

Check the power supply voltage and connect your power supply into the power

port on the Camera.

Attach a test monitor to the video out BNC port and adjust the zoom.

(See connection example)

This can be done by using the T (Zoom in) and W (Zoom out)

buttons at the rear of the Camera. (See button operations)

The default Camera setting is 'AUTO' focus.

If you require manual focus, select:

'MENU 1' > FOCUS MODE > MANUAL.

The N (Focus near) and F (Focus far) buttons on the

Camera can now be used.

Adjust the Camera picture using the OSD menu as necessary.

TROUBLESHOOTING

Ensure all power and cable connections are correct between the Camera,

power source, monitor, telemetry devices and DVR if used

Example

CONNECTION EXAMPLE

BUTTON OPERATIONS

DVR CAM MENU SET PRESET

AUX/

RUN/

PANIC

PATTERN/

SETUP

PREV /

DISPLAY

NEXT /

SEQ

MON

CAM/DVR

ESC

ENTER

1 2 3

4 5 6

789

OPEN FAR WIDE

IRIS FOCUS ZOOM

CLOSE NEAR TELE

POWER Rx Tx

DVR AI CAM

ALM/ GROUP/ OFF/ ON/ VST/

PSU

FUNCTION KEYS

POWER INPUT TERMINAL

POWER LED

VIDEO OUT JACK

CONTROL INTERFACE

POWER

485+

485-

ZOOM

COM

FOCUS

D/N

GND

+12V GND

VIDEO

FOCUS

EXPOSURE

WHITE BALANCE

FOCUS MODE ZOOM TRIG / MANUAL / AUTO

INTERVAL RUN TIME 0 ~ 254

INTERVAL 0 ~ 254

ZOOM START 1 ~ 22

ZOOM STOP 1 ~ 264

ZOOM SPEED SLOW / NORMAL / FAST / V. FAST

D-ZOOM ON / OFF

MIN. DIST 10CM / 10M / INF

SHUTTER OFF / FLK / 1/160 ~ 1/100000 /

2FLD ~ 256FLD / AUTO

IRIS AUTO

MANUAL 0 ~ 255

AGC AUTO

MANUAL -3DB ~ 28DB

BRIGHT 0 ~ 100

MAX. AGC OFF / LOW / MIDDLE / HIGH / SUPER

MAX. FIELD OFF / 2FLD ~ 256FLD

ATW

AWB

PUSH

MANUAL RED 0 ~ 100

BLUE 0 ~ 100

INDOOR

OUTDOOR

OSD

IMAGE

D-WDR / BLC

DAY & NIGHT

OFF

D-WDR LEVEL LOW 0 ~ 15

LEVEL HIGH 0 ~ 15

BLC LEVEL LOW / MIDDLE / HIGH

AREA H. START 0 ~ 7

V. START 0 ~ 7

WIDTH 0 ~ 8

HEIGHT 0 ~ 8

HSBLC ALL DAY / NIGHT

LEVEL 0 ~ 8

AREA H. START 0 ~ 7

V. START 0 ~ 7

WIDTH 0 ~ 8

HEIGHT 0 ~ 8

COLOUR

EXTERNAL

AUTO DETECT MODE VIDEO D > N 1 ~ 255

N > D 0 ~ 254

SENSOR

DWELL TIME 0 ~ 60

BURST ON / OFF

3 DNR OFF

ON LEVEL 0 ~ 100

FREEZE OFF / ON

ROTATE OFF / H / V / HV

SHARPNESS 0 ~ 31

NEGATIVE OFF / ON

SPECIAL

CAM ID

BAUDRATE

LANGUAGE

TITLE

PRIVACY

MOTION

OSD SET

0 ~ 255

2400 ~ 38400

ENG

OFF

CAM ID

ZOOM MAG

FUNC OSD

OSD COLOUR

(OPENS KEYBOARD)

MASK NO

DISP MODE

COLOUR

TRANSPARENT

AREA NO

DETECT MODE

H. START

V.START

WIDTH

HEIGHT

SENSE

ALARM TIME

DISP. MODE

OFF / ON

C1 ~ C15

1 ~ 8

OFF

INT. LOCK

NON. LOCK

WIDTH

HEIGHT

ZOOM POSI

MASK RESET

WIDTH

HEIGHT

PAN POSI

TILT POSI

ZOOM POSI

MASK RESET

C1 ~ C15

OFF / ON

0 ~ 80

< W T >

ON / OFF

0 ~ 80

0 ~ 200

0 ~ 220

ON / OFF

1 ~ 4

ON / OFF

0 ~ 200

0 ~ 140

0 ~ 200

0 ~ 140

0 ~ 40

OFF / 1 ~ 255

OFF / OSD / AREA /

OSD & AREA

OSD FACTORY DEFAULT SETTINGS

FUNCTION

FOCUS

EXPOSURE

WHITE BALANCE

D-WDR/BLC

DAY &NIGHT

IMAGE

SPECIAL

STATUS

AUTO

SHUTTER

IRIS

AGC

BRIGHT

MAX.AGC

MAX. FIELD

ATW

OFF

AUTO

3DNR

FREEZE

ROTATE

SHARPNESS

NEGATIVE

CAM ID

BAUDRATE

LANGUAGE

TITLE

PRIVACY

MOTION

AUTO

MIDDLE

OFF

OO1

9600

ENG

OFF

RESET OFF

RESET

DIMENSIONS

Tabla de contenidos

Otros manuales de Cámara de seguridad de Concept Pro

Concept Pro

Concept Pro CVP9324DN-IP Manual de usuario

Concept Pro

Concept Pro AIR8012-IP3M-Z Manual de usuario

Concept Pro

Concept Pro CBP360-HD Manual de usuario

Concept Pro

Concept Pro VCP7236 Manual de usuario

Concept Pro

Concept Pro CBP360-IP12M Manual de usuario

Concept Pro

Concept Pro CBP6314DNIR Manual de usuario

Concept Pro

Concept Pro CVP9324DNIR-HDA-3MP Manual de usuario

Concept Pro

Concept Pro VCP7238-AHD Manual de usuario

Concept Pro

Concept Pro CVP5325DNIR-IP2M/2.8 Manual de usuario

Concept Pro

Concept Pro AIR2024-IP2M/2.8 Manual de usuario

Concept Pro

Concept Pro CVP9324-AHD Manual de usuario

Concept Pro

Concept Pro AIR8010-AHD-Z Manual de usuario

Concept Pro

Concept Pro CVP5325DNIR-AHD2M/2.8 Manual de usuario

Concept Pro

Concept Pro CBP4304 Manual de usuario

Concept Pro

Concept Pro CP-HSD10-IP Manual de usuario

Concept Pro

Concept Pro VHSDIR-680EXT-IP Manual de usuario

Concept Pro

Concept Pro CP-HSD20-IP Manual de usuario

Concept Pro

Concept Pro CPL-MVIR-IP2M/2.8 Manual de usuario

Concept Pro

Concept Pro VHSDIR-812EXT-IP3M Manual de usuario

Concept Pro

Concept Pro AIR8012-IP3M-Z Manual de usuario

Concept Pro

Concept Pro AIR3016 Manual de usuario

Concept Pro

Concept Pro CVP9328DNIR-IP2M-Z Manual de usuario

Concept Pro

Concept Pro AHD Series Manual de usuario

Concept Pro

Concept Pro CVP9328DNIR-IP4M Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario