Clarke CTA150 Manual de usuario

ASSEMBLY INSTRUCTIONS

LS0518 - ISS 2

ORIGINAL INSTRUCTIONS

ADJUSTABLE TRESTLE

MODEL NO: CTA150

PART NO: 6600018

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for selecting this Clarke Adjustable Trestle.

Read this manual before use. The safety precautions in this manual will help

you use the trestle safely.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

1. This trestle has a capacity of 15O kg which must not be exceeded.

2. Do not stand on the cross members or use as a step ladder, as this could

cause severe damage. Do not stand on top of the trestle.

3. Take care when placing a load on the trestle, it should be placed gently so

that the strain is taken up gradually.

4. Do not mount power tools on the trestle.

5. Always check the trestle for damage before use.

6. Always ensure you are working on a firm, flat, stable surface.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATIONS

WHAT IS SUPPLIED

Dimensions L x W x H 685 x 590 x 815-1310 mm

Maximum Load 150 kg

Number Description Qty Part number

1Legs(pair) 2

2 Lower Cross Brace 2

3 Upper Cross Brace 1

4PivotPlate 2

5 Fixings Pack 1

6 Support Bar 1

7 Support Frame Upright 2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

MAIN FRAME

1. Join both sets of legs together

with the upper cross brace.

2. Secure the upper cross brace.

• The small machine screw.

washer, spring washer and nut

must be installed towards the

front of the stand.

• The lug, washer, spring washer

and nut must be installed

toward the rear, on the same

side as the locking latch.

3. Fit the lower cross braces to the

front and rear as shown using the

nuts/bolts and washers provided.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SUPPORT FRAME

1. Fit the 2 support frame uprights to

the support bar as shown.

2. Join them together using 1 bolt, 2

washers and a nut in each hole (4

holes in total).

3. Slide the support frame into the

main frame as shown.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPENING/CLOSING THE WORKBENCH

OPENING

1. Spread the front and rear legs.

2. Press down on the lower locking

bar (1) as shown.

3. Slide the locking latch over the lug

(2).

4. Test the stability of the stand by

rocking it before use.

SETTING THE SUPPORT HEIGHT

1. Raise the support bar to the

required height.

2. Insert the locking pin as shown on

both sides.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Rack y soporte de Clarke

Clarke

Clarke CBS3 Manual de usuario

Clarke

Clarke CWMWR1 Manual de usuario

Clarke

Clarke CMS1 Manual de usuario

Clarke

Clarke CAX6TBC Manual de usuario

Clarke

Clarke Metalworker CL430 Manual de usuario

Clarke

Clarke CARS1 Manual de instrucciones

Clarke

Clarke CAX3TBC Manual de usuario

Clarke

Clarke MDS1 Manual de usuario

Clarke

Clarke CAX20S Manual de usuario

Clarke

Clarke CWR45B Manual de programación

Clarke

Clarke CWR45 Manual de programación

Clarke

Clarke CSP420 Manual de usuario

Clarke

Clarke Strong-Arm CES340 Manual de usuario

Clarke

Clarke CRSF2 Manual de usuario

Clarke

Clarke CWR1 Manual de usuario

Clarke

Clarke CAX3TA Manual de usuario

Clarke

Clarke CES560 Manual de usuario

Clarke

Clarke CT100PR Manual de usuario

Clarke

Clarke STRONG-ARM CAX3TPB Manual de usuario

Clarke

Clarke LB7S Manual de instrucciones

Clarke

Clarke CHT399 Manual de instrucciones

Clarke

Clarke CAX3TAB Manual de usuario

Clarke

Clarke MCD1 Manual de instrucciones

Clarke

Clarke CWC80B Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario