Clarke MDS1 Manual de usuario

VARIABLE SPEED

JIG SAW

ASSEMBLY INSTRUCTIONS

0308

Part No. 6460200

MILL DRILL STAND

MODEL No. MDS1

Part No. 6500330

MILL DRILL STAND

Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE

International reserve the right to change specifications at any time without prior notice.

Whln disposing of this product, ensure it is disposed of according to all local ordinances. It must

not be disposed of with general household waste.

PARTS LIST

Unpack the carton and lay out all components, checking to ensure that

they are complete, against the list which follows.

Check also for any damage which may have occurred in transit. Please

notify your CLARKE dealer immediately should any be found.

(1) (2) (3)

(4) (5)

(6) (7)

(8)

(9) (10)

(11)

(12)

(13)

(14) (15)

PARTS LIST

ON NOITPIRCSED YTQ REBMUNTRAP

1lanaptnorF11001SDMTH

2slanapediS22001SDMTH

3lanaPraeR13001SDMTH

4flehS14001SDMTH

5yarT15001SDMTH

601MtuN46001SDMT

7mm01,rehsaWtalF46001SDMTH

8031X01M,001X01MtloBhcaoC46001SDMTH

98MtuN616001SDMTH

01mm8,rehsaWtalF236001SDMTH

11tloB21x

8M616001SDMTH

21mm6,rehsaWtalF76001SDMTH

3121X6MwercS76001SDMTH

4161MtuN16001SDMTH

51wercsniarD16001SDMTH

Please note, Parts 6-15 are supplied as a complete set (HTMDS1006)

ASSEMBLY

1. Attach the side panel (2) to

the rear panel (3) as shown

and secure into place

using, 4 nuts (11), bolts (9)

and flat washers (10).

2. Place the shelf (4) into the

position shown and using

the screw (13) and washer

(12) provided screw it into

position.

Do not fully tighten the

screw at this stage.

ASSEMBLY

3. Connect the second side

panel (2) to the rear panel

(3) as shown and secure

into place using, 4 nuts

(11), bolts (9) and flat

washers (10).

4. Place the front panel (1)

into position and screw the

other end of the shelf (4)

to the front panel (1),

using a screw (13) and

washer (12) provided.

5. Join the front panel (1) to

the side panels using 8

nuts (11), bolts (9) and flat

washers (10) provided.

ASSEMBLY

( 15 )

( 8 )

6. Place the tray (4) on top

of the stand and line up

the holes. Fix into place

using the remaining 4

screws (13) and washers

(12).

7. Place the drain bolt (15)

into position and secure

using the 24mm nut (14).

8. The compleated unit

should look like this.

9. The coach bolts (8) have

been shown in position for

reference.

10. Press here to open the

door on the front panel

11. Push the catch back into

place to lock the door.

ASSEMBLY

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a

period of 12 months from the date of purchase. Please keep your

receipt as proof of purchase. This guarantee is invalid if the product is

found to have been abused or tampered with in any way, or not used

for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product

can be returned to us without prior permission. This guarantee does not

effect your statutory rights.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Rack y soporte de Clarke

Clarke

Clarke CWR1 Manual de usuario

Clarke

Clarke CSM5175 Series Manual de usuario

Clarke

Clarke CAX3TA Manual de usuario

Clarke

Clarke CAX3TBC Manual de usuario

Clarke

Clarke Metalworker CL430 Manual de usuario

Clarke

Clarke CES560 Manual de usuario

Clarke

Clarke CSR4550BO Manual de usuario

Clarke

Clarke CSP420 Manual de usuario

Clarke

Clarke CES680F Manual del propietario

Clarke

Clarke CDS3 Manual de usuario

Clarke

Clarke CAX20S Manual de usuario

Clarke

Clarke CT100PR Manual de usuario

Clarke

Clarke LB7S Manual de instrucciones

Clarke

Clarke CAX3TAB Manual de usuario

Clarke

Clarke CWMWR1 Manual de usuario

Clarke

Clarke CUTS1 Manual de usuario

Clarke

Clarke CTA150 Manual de usuario

Clarke

Clarke CMSSR Manual de usuario

Clarke

Clarke CMSS Manual de usuario

Clarke

Clarke Strong-Arm CES450 Manual de usuario

Clarke

Clarke CWR45B Manual de programación

Clarke

Clarke LB5S Manual de instrucciones

Clarke

Clarke Strong-Arm CES340 Manual de usuario

Clarke

Clarke CGR1 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario