Cisco Unity Express 8.0 Voice-Mail System Manual de usuario

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco Unity Express 8.0 Voice-Mail System

User’s Guide for Advanced Features

OL-23857-01

First Published: October 26, 2010

This guide provides information about using some of the advanced voice-mail features of your

Cisco Unity Express voice-mail system. It describes how to access these features by dialing in to the

Cisco Unity Express system using your Cisco Unified IP phone. Information is also provided about

using Cisco VoiceView Express. Use this guide together with the documents listed in the “Related

Documents” section on page 3.

Contents

• Restrictions, page 2

• Related Documents, page 3

Part I—Cisco Unity Express Voice-Mail System (Call-in)

• Accessing Cisco Unity Express by Phone, page 4

• Logging in Without Entering Your PIN, page 4

• Voice-mail Options, page 5

• Calling the Message Sender Using Live Reply, page 5

• Managing Fax Messages, page 6

• Delivering Nonsubscriber Messages, page 8

• Accessing Setup Options, page 9

• Managing Greetings, page 9

• Setting Up Message Notification, page 12

• Setting up Cascading Notification, page 18

• Using Distribution Lists, page 20

• Changing Your Password, page 27

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Restrictions

• Changing Your Recorded Name, page 27

• What to Do When Receiving Notifications by Phone, page 28

• Recording a Live Conversation, page 28

• Receiving Voice-mail Messages in Your E-mail, page 29

Part II—Cisco Unity Express Voice-Mail System (VoiceView Express)

• Accessing Cisco Unity Express Using Your Cisco Unified IP Phone and VoiceView Express,

page 31

• Logging In To VoiceView Express, page 33

• Retrieving and Sending Messages in VoiceView Express, page 34

• Printing a Fax, page 36

• Accessing Live Reply in VoiceView Express, page 37

• Setting up Nonsubscriber Message Delivery, page 39

• Managing Your Inbox, page 40

• Personalizing Your Settings, page 41

• Logging In to General Delivery Mailboxes, page 45

• Administering Broadcast Messages, page 46

Restrictions

Your system administrator must enable some of the features described in this guide (for example,

retrieving voice-mail messages using e-mail, configuring voice-mail notifications, or using live reply).

If you are unable to access a feature, contact your system administrator to ensure the function is enabled

on your system.

Cisco Unity Express is subject to an erroneous login limit as set by your system administrator.

There are two types.

• There may be a limit on the number of incorrect consecutive logins allowed, after which the system

administrator is required to restore the user’s login rights.

• Depending on the configuration by your system administrator, login may be temporarily disabled

for the user for a time period after several consecutive unsuccessful log in attempts.

If a Cisco Unity Express voice-mail session is in progress, a second session for the same user cannot be

initiated. This does not apply to voice-mail sessions that are initiated by an Internet Message Access

Protocol (IMAP) client, such as Microsoft Office Outlook.

• If you initiate a voice-mail session by using your Cisco Unified IP phone to call your voice-mail

system, attempting to log in to VoiceView Express cannot preempt the voice-mail session.

• If you are logged in to VoiceView Express, using your Cisco Unified IP phone to call your

voice-mail system preempts the VoiceView Express session. The VoiceView Express session is

automatically logged out without notification.

• If you are logged in to VoiceView Express, logging in to a second VoiceView Express session from

a different phone preempts the first session. The first VoiceView Express session is automatically

logged out without notification.

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Related Topic Document Title or URL

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Voice-mail Options

After dialing in to Cisco Unity Express, you can choose the following options from the main menu:

Calling the Message Sender Using Live Reply

Note To call the message sender using the live reply function, the function must first be activated by your

system administrator.

When listening to a message, you can request the system to dial the message-sender to initiate a live

conversation. This function is available when listening to new, saved, or deleted voice messages from

subscribers or from non-subscribers where caller ID is available.

To access the live reply function, press 44 (4 pressed twice) on the dial pad while listening to the

message. Cisco Unity Express attempts to establish a call to the message sender. Depending on the

identifying information contained in the message, you will hear a prompt with some or all of the

following: “calling <spoken name> at extension <calling number> at <remote location identifier>.”

Note If you activate this function, you will not be returned to your voice-mail session on termination of the

call. You must redial your voice mail access number.

Option Description

1Listen to new messages. See the Cisco Unity Express Voice-Mail System Quick Start Guide

for more information.

Access the Live Reply function. See the “Calling the Message Sender Using Live Reply”

section on page 5.

Manage fax messages. See the “Managing Fax Messages” section on page 6.

2Send a message. See the Cisco Unity Express Voice-Mail System Quick Start Guide for more

information.

Access the nonsubscriber delivery function. See the “Delivering Nonsubscriber Messages”

section on page 8.

3Listen to old messages. See the Cisco Unity Express Voice-Mail System Quick Start Guide

for more information.

4Access setup options, such as voice-mail greetings, distribution lists, passwords, message

notification, and cascading notification. See the “Accessing Setup Options” section on

page 9.

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Managing Fax Messages

Cisco Unity Express can receive and process faxes through the voice-mail system. Faxes can be

forwarded, marked as new, saved, deleted, and undeleted similarly to regular voice messages.

Additionally, you can send fax messages from a mailbox to a local fax machine for printing.

Supported IMAP clients can receive faxes as a .tif file attachment to an e-mail. The IMAP clients allow

subscribers to download the message and save the fax attachment to a local workstation where it can be

viewed and printed using standard .tif readers.

You must compose and send a fax from an analog fax machine. You cannot compose a fax through the

Cisco Unity Express voice-mail system.

If your system administrator configures a dedicated extension for fax calls, these calls will not ring on a

subscriber’s extension. Your system administrator, however, may configure an extension that will receive

both fax and voice calls. In this case, when the subscriber picks up an incoming call that is a fax, an

identifier tone is heard. The system monitors for such tones and automatically sends the fax to the

designated mailbox and terminates the voice leg of the call.

Note Your system administrator must enable the fax function on a mailbox and extension. The fax number

may be the same as the voice-mail extension of a subscriber or a dedicated fax extension may be

configured.

To manage fax messages:

Step 1 Dial in to the Cisco Unity Express system. The voice prompt summarizes how many new and saved

messages your have.

Step 2 Press 1 to listen to new messages.

The voice prompt identifies a fax in your mailbox and lists its properties, for example, the time and date

sent and the originating location. The voice prompt also indicates if a voice message is attached to the

fax.

Note If the fax was forwarded from another subscriber, a voice message can be attached from the forwarding

subscriber.

Step 3 Select the fax.

Step 4 Press one of the following numbers to access options for the fax:

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Managing Fax Messages

Setting Up and Using a Printer for Faxes

To identify the fax printer and print a fax:

Step 1 Dial in to the Cisco Unity Express system, and press 1 to listen to messages.

Step 2 Select the fax, then press 8to send the fax to a local printer.

The system prompts you to enter the number of the fax printer.

Step 3 Perform one of the following actions:

• Press 1to send to a currently configured fax printer.

Note If you pause before entering 1, the system prompt gives the number of the last printer (if any) that was

set up.

• Press 2if there is no configured printer choice or to print to a different printer. Enter the phone

number of the fax printer then press #.

• Press *to cancel printing the fax.

Note If the number entered or chosen is not an acceptable fax printer, the system prompt indicates that the

selected action cannot be completed.

Option Description

1Repeat the fax properties.

2Save the fax. See the Cisco Unity Express Voice-Mail System Quick Start Guide.

3Delete the fax. See the Cisco Unity Express Voice-Mail System Quick Start Guide.

4Reply, with a voice message, to the subscriber who sent the fax. See the Cisco Unity Express

Voice-Mail System Quick Start Guide.

5Forward the fax. See the Cisco Unity Express Voice-Mail System Quick Start Guide.

6Mark the fax as a new message. See the Cisco Unity Express Voice-Mail System Quick Start

Guide.

8Send the fax to a local printer. See the “Setting Up and Using a Printer for Faxes” section

on page 7.

*Cancel.

0Help.

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Delivering Nonsubscriber Messages

You can compose voice messages for delivery to external numbers or nonsubscribers. You can set up

delivery dates for up to one year in advance.

Step 1 Perform steps in the “Accessing Cisco Unity Express by Phone” section on page 4 to reach the main

voice-mail menu.

Step 2 Press 2to access the Send menu.

Step 3 Press #4 to access the nonsubscriber Message Delivery menu.

Step 4 Enter the phone number of the recipient.

Step 5 After the system prompt that the nonsubscriber is added, select one of the following:

Accessing Message Options

After you identify the nonsubscriber recipients, you can specify the message parameters. In the Message

Options menu, you can select the following:

• 1—Change addressing

• 2—Record the message (see the “Recording the Message” section on page 9)

• 3—Change special delivery

–

Mark the message as urgent (1)—Not available for nonsubscriber delivery

–

Mark the message as private (3)—Not available for nonsubscriber delivery

–

Choose a future delivery date and time (4)

• 4—Review the message

If no message is recorded, you are prompted to record your message.

• #—Send the message

If no message is recorded, you are prompted to record your message.

• *—Cancel

Option Description

1Add another recipient.

2Access Message options. See the “Accessing Message Options” section on page 8.

#Record the message. See the “Recording the Message” section on page 9.

*Cancel.

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Accessing Setup Options

Recording the Message

Step 1 In the nonsubscriber delivery menu, press #to record your message.

Step 2 Press # when you finish recording.

Step 3 Press 1 to access Message Options. See the “Accessing Message Options” section on page 8.

Step 4 Press 2 to send the message.

Accessing Setup Options

After dialing in to the Cisco Unity Express system, and pressing 4 to access setup options, choose from

the following options:

Managing Greetings

This section contains the following procedures:

• Managing Greetings, page 11

• Rerecording Your Current Greeting, page 11

• Turning Greetings On and Off, page 11

• Rerecording Your Standard Greeting, page 12

• Rerecording Your Alternate Greeting, page 12

• Reviewing All Greetings, page 12

Option Description

1Manage your greetings. See the “Managing Greetings” section on page 9.

2Configure or change message settings. See the:

• “Setting Up Message Notification” section on page 12

• “Setting up Cascading Notification” section on page 18

• “Using Distribution Lists” section on page 20

3Configure personal settings. See the:

• “Changing Your Password” section on page 27

• “Changing Your Recorded Name” section on page 27

4Configure language options (not available on all systems). Contact your system

administrator for more information.

Cisco Unity Express 8.0 Voicemail User’s Guide for Advanced Features

OL-23857-01

Accessing Setup Options

Greetings are messages that callers hear when they reach your voice mail. You can have the following

greetings:

• Standard greeting—Normal greeting played to callers when they reach your voice mail. This can be

either the default system greeting or a greeting that you have recorded and chosen as your own

standard greeting.

• Multiple Alternate greetings—Multiple alternate greetings are recorded by you and played to the

callers when they reach your voice mail. You can turn these greetings on or off using the voice-mail

menu. These greetings are used as an alternative to your standard greeting. Following are the

Multiple Alternate greetings:

–

Alternate greetings—To record a special greeting (other than standard greeting).

–

Meeting greeting—To record a greeting that plays when you are in a meeting.

–

Vacation greetings—To record a greeting that plays during the time when you are on a Vacation.

–

Extended Absence greetings—To record a greeting that plays during the time when you are

absent for an extended period of time. If extended absence greeting is turned on then mailbox

will not take messages from external callers or will not accept messages from subscribers.

• State Based greetings—State based greetings are recorded by you and played to the callers

according to the state of your business. Following are the State Based greetings:

–

Busy greeting—To record a that plays when you are busy. This greeting is played and it takes

precedence over standard, closed, and internal greetings if the subscriber is busy over the phone

and if this greeting is enabled. But if a multiple alternate greeting is enabled then it takes

precedence over busy greeting. Phone or call agent must provide the support necessary for Cisco

Unity Express to identify that the phone is busy and the call forward is on busy rather than on

no-answer.

–

Closed greeting—To record a greeting that plays during non-business hours or hours past your

business hours. This greeting is played if it is not a business hour and if this greeting is enabled.

Business hours are based on the business schedule that is associated to Voicemail. If internal

greeting is enabled and if the call is during non-business hours then closed greeting is played

over standard greeting. But multiple alternate greeting, busy greeting and internal greeting takes

precedence over closed greeting.

–

Internal greeting—To record a greeting that plays when you receive a call from an internal

extension number.

Greetings Default Precedence Rules

Standard Enabled Standard greeting plays if all other (multiple alternate or

state-based) greetings are disabled.

Alternate Enabled or Disabled Alternate greeting takes precedence over all other

greetings if this greeting is enabled.

Meeting Enabled or Disabled Meeting greeting takes precedence over all other

greetings if this greeting is enabled.

Vacation Enabled or Disabled Vacation greeting takes precedence over all other

greeting if this greeting is enabled.

Extended Absence Enabled or Disabled Extended absence greeting takes precedence over all

other greetings if this greeting is enable.

Tabla de contenidos

Otros manuales de Software de Cisco

Cisco

Cisco Voice Interworking Services (VISM) Manual del operador

Cisco

Cisco Router IOS XR Manual de usuario

Cisco

Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Manual de usuario

Cisco

Cisco TrustSec 3.0 Cómo utilizar

Cisco

Cisco TELEPRESENCE MOVI 4.1 - FOR MAC OS X Manual de usuario

Cisco

Cisco SMART BUSINESS COMMUNICATIONS SYSTEM - FEATURE ... Manual del propietario

Cisco

Cisco OL-11757-01 Manual de instrucciones

Cisco

Cisco Servers Manual de usuario

Cisco

Cisco PIX 520 - PIX Firewall 520 Guía de referencia

Cisco

Cisco PIX 520 - PIX Firewall 520 Manual de usuario

Cisco

Cisco 2509 - Router - EN Manual de usuario

Cisco

Cisco C8510-CHAS5-RF - Catalyst 8510 Campus Switch Router Modular Expansion... Instrucciones de instalación y funcionamiento

Cisco

Cisco AS5200 - Universal Access Server Cómo utilizar

Cisco

Cisco 11.0 BT Cómo utilizar

Cisco

Cisco TELEPRESENCE MANAGEMENT SUITE Manual de usuario

Cisco

Cisco ROUTER-SDM-CD Manual de usuario

Cisco

Cisco Digital Media System 3.5 Manual de instrucciones

Cisco

Cisco 1700 series Manual de usuario

Cisco

Cisco Cisco Access Registrar 4.2 Manual del operador

Cisco

Cisco Craft Works Interface Manual de usuario

Cisco

Cisco 2600 Series Cómo utilizar

Cisco

Cisco TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT... Manual de usuario

Cisco

Cisco Catalyst Series Switch 2940 Manual de usuario

Cisco

Cisco PVDM2 24DM - Digital Modem Module Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario