Bosch IUI-MAP0001 Manual de usuario
MAP Control Center
IUI-MAP0001
en User Guide
MAP Control Center Table of Contents | en 3
Bosch Security Systems, Inc. User guide F.01U.168.328 | 03 | 2011.05
Table of Contents
1SystemOverview 5
1.1 Certifications 5
1.2 MAP Control Center Description 5
1.2.1 LCD Screen 5
1.2.2 MAP Control Center LEDs 5
1.3 Control Center Maintenance 5
1.4 Idle Screen 6
1.5 Logging In 7
1.6 Screen Elements 8
2Operation 10
2.1 Alarm Tasks 10
2.1.1 Silence Alarms 10
2.1.2 Clear Alarms 10
2.1.3 View Event Memory 10
2.1.4 Clearing An Anti-masking Message 11
2.2 Searching and Sorting/Filtering 11
2.2.1 Search 12
2.2.2 Sort/Filter 12
2.3 Arm - Using the Control Center 13
2.3.1 Arm All Areas 14
2.3.2 Arm Selected Areas 14
2.3.3 Arm Control Panel (Local) Area 15
2.4 Disarm – Using the Control Center 15
2.4.1 Disarm All Areas 16
2.4.2 Disarm Selected Areas 16
2.4.3 Disarm Control Panel Area 17
2.5 Users 17
2.5.1 Add User 18
2.5.2 Delete User 26
2.5.3 Edit User 27
2.5.4 Change Passcode 29
2.6 Schedules 29
2.7 Status 31
2.7.1 View Area Status 32
2.7.2 View Device Status 34
2.7.3 Bypass/Unbypass Device 37
2.7.4 Unbypass All Devices 38
2.8 Service 39
2.8.1 Event History 40
2.8.2 View Version Information 43
2.8.3 Enable/Disable Device 44
2.8.4 Set Time and Date 45
2.8.5 Walk Test 46
2.8.6 Motion Detector Test 50
2.8.7 Bell and Indicator Test 51
2.8.8 Change/View Output State 52
4en | Table of Contents MAP Control Center
F.01U.168.328 | 03 | 2011.05 User guide Bosch Security Systems, Inc.
2.8.9 Manufacturer Authorization 53
2.8.10 Adjust Volume/Brightness 53
2.8.11 Chime Mode On/Off 54
2.9 Internal Program 54
2.10 Event Memory 55
2.10.1 View Event Memory 56
2.10.2 Clear Event Memory 56
2.10.3 View Alarm Counter 56
2.10.4 Silence 57
2.11 RPS 57
MAP Control Center System Overview | en 5
Bosch Security Systems, Inc. User guide F.01U.168.328 | 03 | 2011.05
1 System Overview
1.1 Certifications
The control center is designed to comply with the following certifications and standards:
1.2 MAP Control Center Description
The MAP control center is an input device for the Modular Alarm Platform 5000 system. Each
control center has a vibrant-color 14 cm (5.7 in.) LCD screen. The durable touch screen
provides access to the various system functions through an interface with intuitive buttons.
Users touch the images directly on the screen to arm, disarm, or select other menu options.
Based on the user’s preference, text is shown in German, English, French, or Dutch.
1.2.1 LCD Screen
To operate the MAP control center, apply moderate pressure to the keys and buttons shown
on the screen. To avoid damage to the touch-sensitive foil do not use sharp objects.
1.2.2 MAP Control Center LEDs
Three light-emitting diodes (LEDs) are located on the left edge of the MAP control center
(Figure 1.1, Page 6):
–Green LED: Indicates that the control center is communicating with the control panel.
–Yellow LED: The default behavior indicates if there is a trouble condition or any
component is blocked or bypassed in the security system
–Red LED: The default behavior indicates that an alarm condition exists in the security
system
1.3 Control Center Maintenance
If the control center housing is dirty, clean it with a soft dampened cloth. Do not use corrosive
or abrasive cleaners. Make sure that no fluid gets inside of the housing. To remove
fingerprints or dust from the LCD screen, use a soft cloth that you have dampened slightly
with water.
Region Certification
GERMANY VdS Class C, VdS G 111040
Europe CE Conformité Européene
EN50131-1/3 grade 3 Alarm Systems – Intrusion
Systems
6en | System Overview MAP Control Center
F.01U.168.328 | 03 | 2011.05 User guide Bosch Security Systems, Inc.
Figure 1.1 Control Center LEDs
1.4 Idle Screen
The control center shows the Idle screen (Figure 1.2, Page 6) when it is not in use. To use the
system, touch the control center display.
Figure 1.2 Idle screen
1 – Green LED
2 – Yellow LED
3 – Red LED
MAP Control Center System Overview | en 7
Bosch Security Systems, Inc. User guide F.01U.168.328 | 03 | 2011.05
1.5 Logging In
Use the Login screen (Figure 1.3, Page 7) to enter your passcode.
Figure 1.3 Login screen
If the system does not recognize the passcode, the control center shows the Invalid Login
screen (Figure 1.4, Page 7). To empty the passcode field, press Clear (the pencil eraser
button). After the user enters a valid passcode, the touch screen shows the Main Menu
(Figure 1.5, Page 8).
Figure 1.4 Invalid Login screen
8en | System Overview MAP Control Center
F.01U.168.328 | 03 | 2011.05 User guide Bosch Security Systems, Inc.
1.6 Screen Elements
Figure 1.5 Main Menu – page 1
Figure 1.6 Main Menu – page 2
1 – Screen name: identifies the active screen.
2 – Menu buttons: Press a menu button to perform a task.
3 – Installer Mode Icon: Indicates that the control panel is in installer mode.
4 – RPS Connected Icon: Indicates that RPS is connected to the control panel.
5 – Information button: If it is flashing, press this button to view additional system information and to
clear the events, alarms or troubles. For more Event Memory information, refer to Section 2.1.3 View
Event Memory, page 10.
–If the Information button is flashing red, there are system events and alarms that the user has
not cleared.
–If the Information button is flashing yellow, there are system troubles which the user has not
cleared.
–If the Information button is green, no additional system information is available.
6 – Navigation bar: Press the buttons in the navigation bar to find tasks or to view system information.
Refer to Table 1.1, Page 9. Buttons in the navigation bar that appear without their normal colors are
not activated.
MAP Control Center System Overview | en 9
Bosch Security Systems, Inc. User guide F.01U.168.328 | 03 | 2011.05
After the user presses a button, the touch screen shows the task buttons contained within
that folder. For example, Figure 2.45 on Page 32 shows the Status tasks.
Table 1.1 Navigation Bar description
NOTICE!
The buttons on your touch screen might be different from the buttons shown in Figure 1.5 on
Page 8 and Figure 1.6 on Page 8. The buttons on your touch screen are determined by your
user authority level.
Button Description
Back: Shows the previous screen.
Home: Shows the Main Menu.
Page up: Shows the previous page on screens with more than one page.
Page down: Shows the next page on screens with more than one page.
Help: Shows helpful information about the active screen.
Exit: Shows the Idle screen (Figure 1.2, Page 6).
10 en | Operation MAP Control Center
F.01U.168.328 | 03 | 2011.05 User guide Bosch Security Systems, Inc.
2 Operation
2.1 Alarm Tasks
2.1.1 Silence Alarms
If the system generates an alarm, press the touch screen and enter your passcode (Figure 1.3,
Page 7). If the system accepts your passcode, the touch screen shows the External Intrusion
Alarm screen (Figure 2.1, Page 10).
Figure 2.1 External Intrusion Alarm screen
To silence the alarm, press Silence. If the system recorded more than one alarm, the screen
shows the first and last alarms. Press View More to see events in the event memory. For more
information about event memory, refer to Section 2.1.3 View Event Memory, page 10.
2.1.2 Clear Alarms
After silencing an alarm, the user must clear the alarm. From the alarm screen (Figure 2.1,
Page 10), press View More to open the View Event Memory screen (Figure 2.2, Page 10). To
clear the alarm, press Clear Events.
2.1.3 View Event Memory
If the Information button on the Main Menu (Figure 1.5, Page 8) flashes red or yellow, press
the Information button to view the View Event Memory screen (Figure 2.2, Page 10). For
additional event memory options, refer to Section 2.10 Event Memory, page 55.
Figure 2.2 View Event Memory screen
Tabla de contenidos
Otros manuales de Sistema de seguridad de Bosch
Bosch
Bosch PRAESENSA Manual de usuario
Bosch
Bosch ICP-MAP5000-2 Manual de usuario
Bosch
Bosch Solution 64 Manual de usuario
Bosch
Bosch Solution 16plus Manual de usuario
Bosch
Bosch Solution 6000-IP Manual de usuario
Bosch
Bosch D1260 Series Manual de usuario
Bosch
Bosch BIS 2.3 Manual de usuario
Bosch
Bosch LTC 5136/61 Manual de usuario
Bosch
Bosch Spexor Manual de usuario
Bosch
Bosch ITS-SPDIAL-FR Manual de usuario
Bosch
Bosch FMC-210-SM Manual de usuario
Bosch
Bosch GVS1000 Manual de usuario
Bosch
Bosch CC880/LP880, SC8016 Manual
Bosch
Bosch NBN-733 Instrucciones de montaje
Bosch
Bosch AMAX 2100 Manual de instrucciones
Bosch
Bosch CP050B Cómo utilizar
Bosch
Bosch Divar Manual de usuario
Bosch
Bosch CP156B Cómo utilizar
Bosch
Bosch PR109B Manual de usuario
Bosch
Bosch Plena BGM Source Manual de usuario
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario