Bosch ISW-BMC1-M82X Cómo utilizar

Wireless Local Security Network wLSN

Release Notes October 2006

1.0 Compatibility

wLSN is compatible with the Easy Series V2+

Intrusion Control Panel.

2.0 Known Issues

2.1 General Information

CAUTION: If you have unused wireless

devices, replace the battery tabs or

remove the batteries to prevent battery

depletion.

•Returning a Device to an Undiscovered State:

In the wLSN Reference Guide (P/N: F01U009440),

Section 2.4 Site Testing explains how to return a

device to the undiscovered state. This explanation

is incorrect. Below is the correct procedure:

1. Remove the batteries.

2. Press and hold the tamper switch button.

3. Reinsert the batteries while holding the

tamper switch button.

The device’s LED turns on.

4. Release the tamper switch button within five

sec. after the device’s LED turns on.

The device returns to an undiscovered state.

•Magnet Placement for Door-Window Contact,

Mini Door-Window Contact, and Inertia

Detector: The magnet can be placed on either

side of these devices.

2.2 Mini Door-Window Contact

(ISW-BMC1-M82X)

Tamper Switch Location: Refer to Figure 1 for the

location of the tamper switch on the Mini Door-

Window Contact.

Figure 1: Tamper Switch Location

2.3 Recessed Door-Window Contact

(ISW-BMC1-R135X)

Tamper Switch Location: Refer to Figure 2 for the

location of the tamper switch on the Recessed Door-

Window Contact.

Figure 2: Tamper Switch Location

2.4 Glassbreak Detector

(ISW-BGB1-SAX)

•RF Signal Strength (RFSS) Mode LED

Location: Refer to Figure 3 for the location of the

LED that turns on when the detector enters RFSS

Mode.

Figure 3: RFSS Mode LED Location

www.boschsecuritysystems.com

F01U032063B

Release Notes

10/0

wLS

Page 2 of

•Entering RFSS Mode with Wall Tamper Tab

Removed:

1. Take the detector to its planned mounting

location.

2. Remove and reinsert the batteries.

3. Press and hold the wall tamper switch.

Refer to Figure 4.

4. Quickly press and release the cover tamper

switch four times. Refer to Figure 5.

The detector enters RFSS Mode.

Figure 4: Wall Tamper Switch Location

Figure 5: Cover Tamper Switch Location

•Returning a Glassbreak Detector with the

Wall Tamper Tab Removed to an

Undiscovered State:

1. Remove the batteries from the detector.

2. Place the detector on a flat surface to depress

the wall tamper switch.

Refer to Figure 4.

3. Press and hold the cover tamper switch.

Refer to Figure 5.

4. While both tamper switches are depressed,

reinsert the batteries.

The RFSS Mode LED turns on. Refer to

Figure 3 on page 1.

5. Release the cover tamper switch within five

sec. after the RFSS Mode LED turns on.

The detector returns to an undiscovered state.

2.5 wLSN Key Fob

(ISW-BKF1-H5X)

Programmable Buttons: To operate the

programmable buttons, press and hold either button

for at least 1 sec. Refer to Figure 6.

Figure 6: Programmable Button Locations

Otros manuales para ISW-BMC1-M82X

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de seguridad de Bosch

Bosch

Bosch SOLUTION 6000 Manual de usuario

Bosch

Bosch FLM-420-RLE-S Manual de usuario

Bosch

Bosch SE3000 Series Manual del producto

Bosch

Bosch DVR4C2161 Manual de usuario

Bosch

Bosch PRAESENSA PRA-SCL Hoja de instrucciones

Bosch

Bosch Security Systems Manual de usuario

Bosch

Bosch DS840LSN Manual de usuario

Bosch

Bosch VSS7902/00T Guía de inicio rápido

Bosch

Bosch DIVAR IP all-in-one 7000 3U Manual de usuario

Bosch

Bosch IUI-BES-AO Manual de usuario

Bosch

Bosch AMAX 2100 Manual de instrucciones

Bosch

Bosch D1260 Series Manual de usuario

Bosch

Bosch DB24C4200R2 Manual de usuario

Bosch

Bosch 844 Manual de usuario

Bosch

Bosch AMC UL1 Manual de usuario

Bosch

Bosch BIS 2.3 Manual de usuario

Bosch

Bosch CM705B Cómo utilizar

Bosch

Bosch CP156B Cómo utilizar

Bosch

Bosch SOLUTION 3000 Manual de usuario

Bosch

Bosch FK 100 LSN Manual de usuario

Bosch

Bosch LTC 1311/20 FlexiDome I Hoja de instrucciones

Bosch

Bosch Solution 2000 Manual del propietario

Bosch

Bosch FW5.50 Instrucciones de montaje

Bosch

Bosch AVENAR all-in-one 4000 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario