AWS Gemini-20 Manual de usuario

Tabla de contenidos

Manuales populares de Escala de otras marcas

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario

Fidelity Electronics

Fidelity Electronics G2e Manual de usuario

American Weigh Scales, Inc.

User Manual

GEMiNi-20

Gemini-20 Manual

Thank you for purchasing the American Weigh Gemini-

20 portable milligram scale. Please read all operating

instructions carefully before use. This electronic scale

is a precision instrument. With normal care and proper

treatment, it will provide years of reliable service.

Never load the scale with more than the maximum

capacity. Overloading the scale will permanently

damage it! Avoid any exposure to extreme heat or

cold. Your scale works better when operated at normal

room temperature. Always allow the scale to acclimate

to normal room temperature for at least one hour

before use.

Give your scale sufcient warm up time. Usually

30-60 seconds before calibration to give the internal

components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt,

moisture, vibration, air currents and a close distance to

other electronic equipment can all cause an adverse

effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed

onto tray top. Although this scale is designed to be

quite durable, try to avoid rough treatment as this may

permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the

scale. This is a precision instrument and must be

handled with extreme care.

Only operate the scale on a stable, vibration free

surface.

I. OPERATION

Place the scale on a at and level surface.

1. Press the [ON] key.

2. Wait until "0.000g” is displayed.

3. Place the object(s) to be weighed on the weighing

platform.

4. Using the [MODE] key, you can switch between the

weighing units.

(To weigh using the tray, place it on the platform before

turning the scale on or use the Tare feature.)

II. TARE WEIGHING

Using Tare, you can subtract the weight of a container.

1. Turn the scale on as described above.

2. Place the "tare item" on the platform such as a tray

or container.

3. Press [TARE] and wait until "0.000g" is displayed.

4. You can now add items to the tray or container.

III. CALIBRATION

Calibration is NOT required before rst use. Only

calibrate if scale is not weighing properly.

off. Calibration is compete!

1. Turn the scale on as described above.

2. Once the scale is at zero, press and hold the [ON]

key for about 3 seconds. The display will go blank

briey then ash “0”. You may now release the [ON]

key.

3. The display will show “10.000” and the “g” indicator

will be ashing.

4. Place the 10g calibration weight on the center of the

platform and wait until the “g” indicator stops ashing.

Calibration is complete!

IV. TROUBLESHOOTING

The primary reasons for inaccuracy or malfunction

are low batteries, incorrect calibration, overload or

operating on an unstable surface. Please keep this in

mind and maintain and operate your scale properly.

This scale is a precise instrument and must be

handled with the utmost care and caution.

[Display] Elimination of errors

Nothing, Battery-Symbol, [lo] or [88888]

Change the batteries.

[Err1] Recalibrate the scale as shown above.

[Err2] You are overloading the scale. Remove the

excess again after recalibration.

Model Gemini-20

Capacity 20g / 0.7055oz / 100ct / 308.64

Resolution 0.001g / 0.0001oz / 0.005ct / 0.02gn

Calibration Weight 10g (or 1g-20g selectable at calibration)

Platform Dimensions

(inches) 0.7 ” diameter (1.3 ” with tray)

Scale Dimensions

(inches) 3 x 5 x 0.75 ”

Power 2 x AAA (included)

Specications