Avenview HBT-C6IR-SET Manual de usuario
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
AV Connectivity, Distribution And Beyond...
HDBaseT HDMI Extender Set Single CAT5/6
with Bi-Directional IR
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: HBT-C6IR-SET
4K2K
Military Residential
Medical Aviation
Education Industrial
Coroprate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................4
2.2 BEFORE INSTALLATION...................................................................................................................4
2.3 APPLICATION DIAGRAM..................................................................................................................5
2.4 PANEL DESCRIPTION.......................................................................................................................6
2.4.1 INPUT PANEL (Receiver, HBT-C6IP-SET) Front ......................................................................6
2.4.2 INPUT PANEL (Receiver, HBT-C6IP-SET) Rear........................................................................6
2.4.3 INPUT PANEL (Receiver, HBT-C6IP-SET) Front ......................................................................7
2.4.4 INPUT PANEL (Receiver, HBT-C6IP-SET) Rear........................................................................7
3. IR EXTENDERS ..................................................................................................................................8
4. INSTALLATION (HBT-C6IP-SET) ......................................................................................................9
5. GENERAL TROUBLESHOOTING.....................................................................................................9
6. CABLE SPECIFICATION ..................................................................................................................10
7. SPECIFICATIONS .............................................................................................................................11
www.avenview.com Page 1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The HBT-C6IP-SET, HDMI Extender over Signal CAT5/6 with HDBaseT-Lite Technology has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the
HBT-C6IR-SET should be used with care. Read the following safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page 3
2. INTRODUCTION
The Avenview HBT-C6IP-SET HDMI Extender over Single CAT5/CAT6 embedded with HDBaseT Lite Technology which
supports:
Video Signals: 4K2K@30, 3D, Deep Color, and Full HD 1080p 48-bit color depth.
Audio Signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD.
Data Signals: Bi-Directional IR signals 20 KHz to 60 KHz over CAT5/6 from third party IR Senders.
This device was designed extend your video/audio sources that are compliant with TMDS and HDCP over single twisted pair
CAT5/6 to 60m -198ft (1080p 48-bit) and 40m-130ft (4K@30) to your HDMI or DVI display monitors.
The HBT-C6IR-SET includes (2) two units: Transmitting unit (Tx) HBT-C6IR-S and Receiving unit (Rx) HBT-C6IR-R. The Tx
is designed to capture the input HDMI / DVI video/audio/data signals with IR control packets then transmits both signals over
Single CAT5/6 cable. The Rx is responsible for equalizing the transmitted HDMI signal and reconstructing the IR signals to the
appropriate device for control via its 10G transmission.
- HDBaseT-Lite technology
- HDMI 4K2K@30, Full HD1080p, Deep Color & 3D
- Supports default resolutions 480p,720p1080p and HDCP & EDID Bypass
- Extends up to 60m (198ft) (1080p)
- Extends up to 40m (130ft) (4K@30)
- Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD, Dolby True HD
- EC support to control supported devices for common user controls via HDMI
- Auto Equalization built –in to ensure the high quality video/audio is transmitted
- Support Bi-Directional IR signals 20 KHz to 60 KHz
- Supports CEC (Consumer Electronic Control)
- Wall mounting housing design for easy and robust installation
NOTE: The QUALITY and TRANSMISSION of the video signals depends
on the characteristics and quality of the UTP cables. Higher resolutions
and longer transmission distances require low skew cables (<25ns/100m)
for best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended.
www.avenview.com Page 4
2.1 PACKAGE CONTENTS
Before you start the installation of the Extender/Splitter, please check the package contents.
1HBT-C6IP-SET X 1
2POWER ADAPTER (+5V 2A DC) X 1
3USER’S MANUAL X 1
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•Do not twist or pull by force ends of the UTP cable. It can cause malfunction.
www.avenview.com Page 5
2.3 APPLICATION DIAGRAM
www.avenview.com Page 6
2.4 PANEL DESCRIPTION
2.4.1 INPUT PANEL (Receiver, HBT-C6IP-SET) Front
1. POWER: 5V DC Locking Screw jack 2. LED: Power Indicator
3. HDMI IN: HD Source INPUT to extend with Male to
Male Cable.
4. IR BLASTER: 3.5mm Female input
NOTE: Only plug in the IR Sender Jack
5. IR RECEIVER: 3.5mm Female input
NOTE: Only plug in the IR Receiver Jack
2.4.2 INPUT PANEL (Receiver, HBT-C6IP-SET) Rear
6. LED: Indicator when the (HBT-C6IR-S) TX is
connected and communicating with the (HBT-
C6IR-R) RX via CAT5/6
7. RJ45 Out: Only Plug In CAT5/6 that will be
connected to the HBT-C6IR-R
7
6
1 3
24 5
www.avenview.com Page 7
2.4.3 INPUT PANEL (Receiver, HBT-C6IP-SET) Front
1. POWER: 5V DC Locking Screw jack 2. LED: Power Indicator
3. HDMI OUT: Video/Audio OUTPUT to any HD Dis-
play with Male to Male Cable
4. IR BLASTER: 3.5mm Female input
NOTE: Only plug in the IR Sender Jack
5. IR RECEIVER: 3.5mm Female input
NOTE: Only plug in the IR Receiver Jack
2.4.4 INPUT PANEL (Receiver, HBT-C6IP-SET) Rear
6. LED: Indicator when the (HBT-C6IR-S) TX is
connected and communicating with the (HBT-
C6IR-R) RX via CAT5/6
7. RJ45 Out: RJ45 with CAT5/6 cable connec-
tion from the Tx HBT-C6IR-S
1 32 4 5
76
Tabla de contenidos
Otros manuales de Extensor de Avenview
Avenview
Avenview HDM-C5SP-8SRSR Manual de usuario
Avenview
Avenview C5-USB-200 Manual de usuario
Avenview
Avenview HDM3D-C5SP-8 Manual de usuario
Avenview
Avenview HDMI-C5SP-4 Manual de usuario
Avenview
Avenview HDM3D-C5SP-4 Manual de usuario
Avenview
Avenview HDM3D-C53X-SET Manual de usuario
Avenview
Avenview FO-HDM-IP4K-SET Manual de usuario
Avenview
Avenview HDM-C5-R-M Manual de usuario
Avenview
Avenview FO-VGA-DVI Manual de usuario
Avenview
Avenview VGA-C5-SP-4 Manual de usuario
Avenview
Avenview DVI-C5-M-SET Manual de usuario
Avenview
Avenview HBT2-C6BPOC-SET Manual de usuario
Avenview
Avenview VGA-C5ARS-SET Manual de usuario
Avenview
Avenview FO-DVI-1080LC-Set Manual de usuario
Avenview
Avenview HDM-SHAREPRO-IP Manual de usuario
Avenview
Avenview FO-DVI-DL-330 Series Manual de usuario
Avenview
Avenview WL-VGA-EXT Manual de usuario
Avenview
Avenview FO-HDM-1000M-EMI Manual de usuario
Avenview
Avenview FO-DP4K-300-EMIX Manual de usuario
Avenview
Avenview DVI-C5-LC-R Manual de usuario
