Agilent Technologies 4100 Instrucciones de funcionamiento
Agilent 4100
Microwave Plasma
Atomic Emission
Spectrometer
Site Preparation Guide
2 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide
Notices
© Agilent Technologies, Inc. 2011
No part of this guide may be
reproduced in any form or by any
means (including electronic storage
and retrieval or translation into a
foreign language) without prior
agreement and written consent from
Agilent Technologies, Inc. as governed
by United States and international
copyright laws.
Guide Part Number
G8000-90001
Edition
First edition, August 2011
Printed in USA
Agilent products must only be used in
the manner described in the Agilent
product user guides. Any other use
may result in damage to the product
or personal injury. Agilent is not
responsible for any damages caused,
in whole or in part, by improper use of
the products, unauthorized alterations,
adjustments or modifications to the
products, failure to comply with
procedures in Agilent product user
guides, or use of the products in
violation of applicable laws, rules or
regulations.
Agilent shall not be liable for errors or
damages on products or performance
due to using non-Agilent genuine
parts.
Warranty
The material contained in this
document is provided “as is,” and is
subject to being changed, without
notice, in future editions. Further, to
the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or implied,
with regard to this guide and any
information contained herein,
including but not limited to the
implied warranties of merchantability
and fitness for a particular purpose.
Agilent shall not be liable for errors
or for incidental or consequential
damages in connection with the
furnishing, use, or performance of
this document or of any information
contained herein. Should Agilent and
the user have a separate written
agreement with warranty terms
covering the material in this
document that conflict with these
terms, the warranty terms in the
separate agreement shall control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may be
used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
If software is for use in the
performance of a U.S. Government
prime contract or subcontract,
Software is delivered and licensed as
“Commercial computer software” as
defined in DFAR 252.227-7014 (June
1995), or as a “commercial item” as
defined in FAR 2.101(a) or as
“Restricted computer software” as
defined in FAR 52.227-19 (June 1987)
or any equivalent agency regulation or
contract clause. Use, duplication or
disclosure of Software is subject to
Agilent Technologies’ standard
commercial license terms, and non-
DOD Departments and Agencies of the
U.S. Government will receive no
greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will
receive no greater than Limited Rights
as defined in FAR 52.227-14 (June
1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Safety Notices
A CAUTION notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are fully
understood and met.
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or the
like that, if not correctly performed
or adhered to, could result in
personal injury or death. Do not
proceed beyond a WARNING notice
until the indicated conditions are
fully understood and met.
WARNING
CAUTION
Contents
Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 3
Contents
1. Introduction 7
Installation Guidelines 8
Site Preparation Check-list 9
2. Safety Practices and Hazards 11
General 11
Plasma 12
Heat,VaporsandFumes 13
Compressed Gas Hazards 14
ElectricalHazards 15
OtherPrecautions 15
WarningSymbols 16
ColorCoding 17
CECompliance 18
ICES/NMB-001 18
3. Laboratory Environment 19
Suitability 19
Environmental Conditions 20
Temperaturecontrol 21
Cleanliness 21
Instrument cooling air supply 21
Workbench 22
Contents
4 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide
WorkbenchLocation 22
PCRequirements 23
4. Instrument Shipping Information 25
In-houseTransitRoutes 25
InsuranceAfterDelivery 26
WeightsandDimensions 26
TransitDamage 27
Unpacking the Instrument 28
5. Laboratory Facilities 29
ExhaustSystem 29
ElectricalPowerSupplies 30
Electricalrequirements 31
Instrument power connections 31
Other electrical connections 32
Fuses 32
GasSupplies 32
Cylinder storage instructions 34
Cryogenicliquids 34
WasteFluidContainer 35
Guidelines for Software Installation 35
Contents
Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 5
6. AccessoriesandOptions 37
Organic Solvents or Hydrofluoric Acid 37
ExternalGasControlModule 38
Gasrequirements 38
Monochromator Optics Air Purge 39
Gasrequirements 40
Sample Preparation System (SPS 3) 40
Environmental conditions 41
Multimode Sample Introduction System (MSIS) 41
Agilent 4107 Nitrogen Generator 42
Environmental requirements 42
Maximum sound power level 42
Gasrequirements 43
Electricalrequirements 44
Weights and dimensions 44
7. Gas Requirements and Configurations 45
Compressed Air Requirements 45
Agilent 4100 MP-AES Gas Configurations 48
Introduction
6 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide
This page is intentionally left blank.
Introduction
Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 7
1. Introduction
Installation Guidelines 8
Site Preparation Check-list 9
This guide contains the information required to successfully prepare
a site for an Agilent 4100 Microwave Plasma Atomic Emission
Spectrometer (MP-AES) instrument installation.
On completion of the site preparation, fill in the check-list on Page 9,
(striking out those entries not applicable), and send this check-list to
your local Agilent agent or Agilent sales and service office. As soon
as it is received, Agilent or its agent will contact you to arrange a
convenient time for installation.
References to the Agilent 4100 MP-AES instrument are applicable to
all models and configurations unless otherwise stated.
In case of difficulty in preparing for the installation, and for details
of operator training courses, please contact your Agilent sales
representative or field service engineer at the address given below:
Introduction
8 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide
Installation Guidelines
Allow a minimum of four hours for the installation by an Agilent field
service engineer. If accessories are included, allow a maximum of
eight hours.
The installation and familiarization will include the following
Instrument installation
Instrument software installation and registration
Accessory installation
Instrument installation performance tests
Basic customer training
Maintenance overview
Introduction
Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 9
Site Preparation Check-list
I have prepared:
Exhaust system
Gas supplies
Nitrogen (separate supplies for the MP-AES and EGCM)
Air (separate supplies for the MP-AES and nitrogen
generator)
Argon
Electrical power supplies
Power connections
Personal computer with Windows 7 64-bit operating system
installed and printer
Waste container
Cooling air system (if required)
Accessories
SPS 3 – Sample Preparation System
EGCM – External Gas Control Module – including gas supplies
Monochromator Optics Purge – including gas supplies
Agilent 4107 Nitrogen Generator – including gas supplies
All preparations have been completed. Please arrange for the
installation to be completed as soon as possible. I understand that if
the installation site is not prepared in accordance with the enclosed
instructions, additional installation charges may be applicable.
Company name and address:
Name:
Position:
Telephone: Date:
Preferred Installation date:
Signed:
Introduction
10 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide
This page is intentionally left blank.
Otros manuales para 4100
2
Tabla de contenidos
Otros manuales de Equipo de laboratorio de Agilent Technologies
Agilent Technologies
Agilent Technologies TPS-mobile Manual de usuario
Agilent Technologies
Agilent Technologies 8890 Manual de usuario
Agilent Technologies
Agilent Technologies 1260 Infinity Manual de usuario
Agilent Technologies
Agilent Technologies G1960-60470 Manual de usuario
Agilent Technologies
Agilent Technologies 708-DS Guía de instalación
Agilent Technologies
Agilent Technologies MP-AES Guía
Agilent Technologies
Agilent Technologies 1260 Infinity G1315C Manual de usuario
Agilent Technologies
Agilent Technologies PlateLoc Manual de usuario
Agilent Technologies
Agilent Technologies 5890 Manual de usuario
Agilent Technologies
Agilent Technologies 490 Manual de usuario
Agilent Technologies
Agilent Technologies 83620A Manual de usuario
Agilent Technologies
Agilent Technologies E5850A Manual de usuario
Agilent Technologies
Agilent Technologies 1260 Infinity Manual de usuario
Agilent Technologies
Agilent Technologies 5DX 5000 Series Manual de usuario
Agilent Technologies
Agilent Technologies 5517B Manual de usuario
Agilent Technologies
Agilent Technologies G1574A Manual de usuario
Agilent Technologies
Agilent Technologies 1200 series Manual de usuario
Agilent Technologies
Agilent Technologies 6890 Series Manual de usuario
Agilent Technologies
Agilent Technologies 979 Instrucciones de funcionamiento y seguridad
Agilent Technologies
Agilent Technologies 709-DS Manual de usuario
Agilent Technologies
Agilent Technologies 2200 TapeStation Manual de usuario
Agilent Technologies
Agilent Technologies 1290 Infinity II Manual de usuario
Agilent Technologies
Agilent Technologies 8453 Manual de usuario
Agilent Technologies
Agilent Technologies 7000 Triple Quadrupole GC/MS Manual de usuario
